Form 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

 

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the Fiscal Year Ended June 30, 2012

Commission File Number 000-49602

 

 

SYNAPTICS INCORPORATED

(Exact name of registrant as specified in its charter)

 

Delaware   77-0118518

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification No.)

3120 Scott Blvd.

Santa Clara, California

  95054
(Address of principal executive offices)   (Zip Code)

(408) 454-5100

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Common Stock, par value $.001 per share

Preferred Stock Purchase Rights

 

The Nasdaq Global Select Market

The Nasdaq Global Select Market

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  x    No  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer    x   Accelerated filer   ¨
Non-accelerated filer    ¨ (Do not check if a smaller reporting company)   Smaller reporting company   ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of Common Stock held by nonaffiliates of the registrant (25,261,060 shares), based on the closing price of the registrant’s Common Stock as reported on the Nasdaq Global Select Market on December 30, 2011 of $30.15, was $761,620,959. For purposes of this computation, all officers, directors, and 10% beneficial owners of the registrant are deemed to be affiliates. Such determination should not be deemed to be an admission that such officers, directors, or 10% beneficial owners are, in fact, affiliates of the registrant.

As of August 13, 2012, there were outstanding 33,004,709 shares of the registrant’s Common Stock, par value $.001 per share.

 

 

Documents Incorporated by Reference

Portions of the registrant’s definitive Proxy Statement for the 2012 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

 

 

 


Table of Contents

SYNAPTICS INCORPORATED

ANNUAL REPORT ON FORM 10-K

FISCAL 2012

TABLE OF CONTENTS

 

PART I

  

ITEM 1. BUSINESS

     1   

ITEM 1A. RISK FACTORS

     18   

ITEM 1B. UNRESOLVED STAFF COMMENTS

     35   

ITEM 2. PROPERTIES

     35   

ITEM 3. LEGAL PROCEEDINGS

     35   

ITEM 4. MINE SAFETY DISCLOSURES

     35   

PART II

  

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

     36   

ITEM 6. SELECTED FINANCIAL DATA

     39   

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

     40   

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

     52   

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

     53   

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

     53   

ITEM 9A. CONTROLS AND PROCEDURES

     53   

ITEM 9B. OTHER INFORMATION

     54   

PART III

  

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

     55   

ITEM 11. EXECUTIVE COMPENSATION

     55   

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

     55   

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

     55   

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

     55   

PART IV

  

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

     56   

SIGNATURES

     58   

INDEX TO FINANCIAL STATEMENTS

     F-1   

Statement Regarding Forward-Looking Statements

The statements contained in this report on Form 10-K that are not purely historical are forward-looking statements within the meaning of applicable securities laws. Forward-looking statements include statements regarding our “expectations,” “anticipation,” “intentions,” “beliefs,” or “strategies” regarding the future, whether or not those words are used. Forward-looking statements also include statements regarding revenue, margins, expenses, and earnings analysis for fiscal 2013 and thereafter; our positioning in our target markets; our ability to continue to enhance our market position and increase our business through introducing market leading interface solutions; the strength of our intellectual property portfolio, engineering know-how, systems engineering experience, and technological expertise; the success of our product development strategies; the attractiveness of our product solutions, including their performance, cost, customer satisfaction, market position, and potential; continued success of our virtual manufacturing platform; the strength of our customer relationships; the amounts of revenue generated as a result of sales to significant customers; our competitive position and competitive factors; acquisitions or strategic alliances; the success of particular product or marketing programs; and liquidity and anticipated cash needs and availability. All forward-looking statements included in this report are based on information available to us as of the filing date of this report, and we assume no obligation to update any such forward-looking statements. Our actual results could differ materially from the forward-looking statements. Among the factors that could cause actual results to differ materially are the factors discussed in Item 1A. Risk Factors.


Table of Contents

PART I

 

ITEM 1. BUSINESS

Overview

We are a leading worldwide developer and supplier of custom-designed human interface solutions that enable people to interact more easily and intuitively with a wide variety of mobile computing, communications, entertainment, and other electronic devices. We currently target the personal computer, or PC, market, primarily notebook computers, including ultrabooks; the markets for digital lifestyle products, including mobile smartphones and feature phones; the tablet market; and other select electronic device markets with our customized human interface solutions.

We are a market leader in providing human interface solutions to our target markets. Our original equipment manufacturer, or OEM, customers include most of the tier one PC OEMs and many of the world’s largest OEMs for mobile smartphones and feature phones. We generally supply our human interface solutions to our OEM customers through their contract manufacturers, which take delivery of our products and pay us directly for them.

Our website is www.synaptics.com. Through our website, we make available free of charge all of our Securities and Exchange Commission, or SEC, filings, including our annual reports on Form 10-K, our proxy statements, our quarterly reports on Form 10-Q, and our current reports on Form 8-K as well as Form 3, Form 4, and Form 5 Reports for our directors, officers, and principal stockholders, together with amendments to those reports filed or furnished pursuant to Sections 13(a), 15(d), or 16 under the Securities Exchange Act of 1934, as amended, or the Exchange Act. These reports are available immediately after their electronic filing with the SEC. Our website also includes corporate governance information, including our Code of Conduct, our Code of Ethics for the CEO and Senior Financial Officers, and our Board Committee Charters.

Our fiscal year is the 52- or 53-week period ending on the last Saturday in June. The fiscal years presented in this report were a 53-week period ended June 30, 2012, and 52-week periods ended June 25, 2011 and June 26, 2010.

PC Market

We provide custom human interface solutions for navigation, cursor control, and multimedia controls for many of the world’s premier PC OEMs. In addition to notebook applications, other PC product applications for our technology include peripherals, such as keyboards, mice, and monitors, as well as remote control devices for desktops, PCs, and digital home applications. Our solutions for the PC market include the TouchPad™, a touch-sensitive pad that senses the position and movement of a person’s finger on its surface; the ClickPad™, a TouchPad application that eliminates the need for physical buttons; the ForcePad™, a ClickPad that is thinner than conventional touchpads and provides for force sensitivity; the TouchStyk™, a self-contained, easily integrated pointing stick module; and dual pointing solutions that combine both a TouchPad and a pointing stick into a single notebook computer, enabling users to use the interface of their choice.

The latest industry projections for notebook unit growth for the period 2012 through 2016 show a compound annual growth rate of 12% compared with an increase of 2% for desktop computers, reflecting the continued migration from desktops to notebooks fueled by users’ desire for mobile computing and on-the-go access to applications, information, and digital content. Based on the strength of our technology and engineering know-how, we believe we are well positioned to take advantage of the growth opportunity in the notebook computer market. We believe we are well positioned within the notebook computer market as our product lines of touch pads and pointing sticks allow us to address 100% of the notebook computer market.

Digital Lifestyle Product Markets

We believe our intellectual property portfolio, engineering know-how, systems engineering experience, technological expertise, experience in providing human interface solutions to major OEMs of electronic devices, and proven track record of growth in our expanding notebook computer interface business position us to be a key technological enabler for multiple consumer electronic devices targeted to meet the growing digital lifestyle trend. Based on these strengths, we are addressing the opportunities created by the growth of mobile computing communications and entertainment devices within the digital lifestyle product markets, particularly mobile smartphones and feature phones. Digital lifestyle products include mobile smartphones and feature phones, video and music players, and global positioning devices, as well as a variety of mobile, handheld, wireless, and entertainment devices. Our array of human interface solutions for digital lifestyle products are designed to enrich the interface on peripherals, mobile smartphones, and feature phones, allowing the user to more easily use or navigate complex menu systems on their devices. We believe our existing technologies, our range of product solutions, and our emphasis on ease of use, small size, low power consumption, advanced functionality, durability, and reliability enable us to serve multiple aspects of the markets for digital lifestyle products and other electronic devices.

 

1


Table of Contents

Our human interface solutions for the mobile smartphone and feature phone market constitutes an important percentage of our net revenue. Net revenue for our human interface solutions for mobile smartphones and feature phones accounted for approximately 49% and 51% of our net revenue in fiscal 2012 and 2011, respectively. Our ongoing success in serving this market will depend upon the continued growth of the mobile smartphone and feature phone portion of the overall mobile phone market; our ability to demonstrate to mobile phone OEMs the advantages of our human interface solutions in terms of performance, usability, size, durability, power consumption, integration, and industrial design possibilities; and the success of products utilizing our human interface solutions. In addition, our success will depend on our ability to demonstrate to mobile smartphone OEMs the advantages of our flexible touchscreen fulfillment model and systems engineering expertise.

Industry projections for the mobile smartphone market for the period 2012 through 2016 show a compound annual growth rate of 18%, reflecting the trend towards greater functionality in mobile smartphone products to meet and address the expanded needs and expectations of the consumer-oriented market. These products require a simple, durable, and intuitive human interface solution to enable the user to navigate efficiently through menus and scroll through information contained in the host device. We believe we are well positioned to take advantage of this growing market based on our technology, engineering know-how, systems engineering experience, and the acceptance of our human interface solutions by OEMs in this market.

Tablet Market

The tablet market represents a new opportunity for our touchscreen intellectual property portfolio, engineering know-how, and technological expertise. Touchscreen solutions required for the tablet market range from basic e-book vendor solutions to multi-function solutions designed for more complex operating systems. Our ClearPad Series 7 product family is specifically targeted for this market, and its features and functionality can be customized to OEM specifications. Tablet-based capacitive touch interface devices are now offered by several leading PC and mobile phone OEMs and utilize various operating systems, including Android and Windows 8.

Our Strategy

Our objective is to continue to enhance our position as a leading supplier of human interface solutions for the PC market, including ultrabooks, for the markets for digital lifestyle products, including mobile smartphones and feature phones, and for the developing tablet market. Key aspects of our strategy to achieve this objective include those set forth below.

Extend Our Technological Leadership

We plan to utilize our extensive intellectual property portfolio, engineering know-how, and technological expertise to extend the functionality of our product solutions and offer innovative product solutions to customers across multiple markets. We intend to continue utilizing our technological expertise to reduce the overall size, weight, cost, and power consumption of our human interface solutions while increasing their applications, capabilities, and performance. We plan to continue enhancing the ease of use and functionality of our solutions. We also plan to expand our research and development efforts through increased investment in our engineering activities, the hiring of additional engineering personnel, and strategic acquisitions and alliances. We believe that these efforts will enable us to meet customer expectations and to achieve our goal of supplying on a timely and cost-effective basis the most advanced, easy-to-use, functional human interface solutions to our target markets.

Enhance Our Position in the PC and Mobile Smartphone and Feature Phone Markets

We intend to continue introducing market-leading human interface solutions in terms of performance, functionality, size, and ease of use for the PC and mobile smartphone and feature phone markets. We plan to continue enhancing our customers’ industrial design alternatives and device functionality through innovative product development based on our existing capabilities and technological advances.

 

2


Table of Contents

Capitalize on Growth of New Markets

We intend to capitalize on the growth of new markets, such as the tablet market and the ultrabook portion of the PC market, brought about by the convergence of computing, communications, and entertainment devices. We plan to offer innovative, intuitive human interface solutions that address the evolving portability, connectivity, and functionality requirements of these new markets. We plan to offer these solutions to existing and potential OEM customers to enable increased functionality, reduced size, lower cost, and enhanced industrial design features and to enhance the user experience of their products. We plan to utilize our existing technologies as well as aggressively pursue new technologies as new markets evolve that demand new solutions.

Emphasize and Expand Customer Relationships

We plan to emphasize and expand our strong and long-lasting customer relationships and to establish successful relationships with new customers. In each market we serve, we plan to provide the most advanced human interface solutions for our customers’ products. We believe that our human interface solutions enable our customers to deliver a positive user experience and to differentiate their products from those of their competitors. We continually strive to enhance the competitive position of our customers by providing them with innovative, distinctive, and high-quality human interface solutions in a timely and cost-effective basis. To do so, we work continually to improve our productivity, to reduce costs, and to speed the delivery of our human interface solutions. We endeavor to streamline the entire design and delivery process through our ongoing design, engineering, and production improvement efforts. We also focus on providing timely support to our customers after the purchase of our human interface solutions.

We plan to increase our business with existing customers and attract new customers by offering both custom designed solutions, as well as design tools, documentation, a family of capacitive sensing ASICs, and technical support to enable them to develop their own human interface designs in products such as mobile smartphones and feature phones, tablets, ultrabooks, PC peripherals, and other digital entertainment devices. We offer our mobile smartphone and feature phone customers a choice of determining the most optimal way to meet their emerging and growing needs: our traditional custom module solutions or our chip or tail solutions, which enable customers to utilize our proprietary solutions together with third-party components and assembly. Our chip solution consists of our proprietary controller ASIC, customer-specific firmware, and software. Our tail solution consists of our proprietary controller ASIC, associated electronics, customer-specific firmware, software, and flexible circuit material.

Pursue Strategic Relationships and Acquisitions

We intend to develop and expand strategic relationships to enhance our ability to offer value-added human interface solutions to our customers, penetrate new markets, and strengthen the technological leadership of our product solutions. We also intend to consider the potential acquisition of companies in order to expand our technological expertise and to establish or strengthen our presence in selected target markets.

Continue Virtual Manufacturing

We plan to expand and diversify our production capacity through third-party relationships, thereby strengthening our virtual manufacturing platform. This strategy results in a scalable business model; enables us to concentrate on our core competencies of research and development, technological advances, and product design and engineering; and reduces our capital expenditures and working capital requirements. Our virtual manufacturing strategy allows us to maintain a variable cost model, in which we do not incur most of our manufacturing costs until our product solutions have been shipped and billed to our customers.

Product Solutions

We develop and enhance interface technologies that enrich the user’s experience in interacting with the user’s mobile computing, communications, and entertainment devices. We engage with our customers in the design of their custom products and offer product solutions ranging from ASICs, which may include customer-specific firmware, to full module solutions. Our innovative and intuitive human interface solutions can be engineered to accommodate many diverse platforms and our expertise in human factors and usability can be utilized to improve the features and functionality of our solutions. Our extensive array of technologies includes ASICs, firmware, software, mechanical and electrical designs, and pattern recognition and touch-sensing technologies.

 

3


Table of Contents

Our custom-designed human interface solutions are custom engineered, total solutions for our customers, and include sensor design, module layout, ASICs, firmware, and software features for which we provide manufacturing and design support, and device testing. This allows us to be a one-stop supplier for complete human interface design from the early design stage, to manufacturing, to testing and support. Through our engineering know-how and technological expertise, we seek to provide our customers with solutions that address their individual design issues and result in high-performance, feature-rich, and reliable interface solutions. We believe our interface solutions offer the following characteristics:

 

   

Ease of Use. Our interface solutions offer the ease of use and intuitive interaction that users demand.

 

   

Small Size. The small, thin size of our interface solutions enables our customers to reduce the overall size and weight of their products in order to satisfy consumer demand for portability.

 

   

Low Power Consumption. The low power consumption of our interface solutions enables our customers to offer products with longer battery life or smaller battery size.

 

   

Advanced Functionality. Our interface solutions offer advanced features, such as virtual scrolling, customizable tap zones, edge motion, and tapping and dragging icons, to enhance the user experience.

 

   

Reliability. The reliability of our interface solutions satisfies consumer requirements for dependability, which is a major component of consumer satisfaction.

 

   

Durability. Our interface solutions withstand repeated use, harsh physical treatment, and temperature fluctuations while providing a superior level of performance.

We believe these characteristics will enable us to maintain our leadership position in the PC market and to enhance our position as a technological enabler within the markets for digital lifestyle products, including mobile smartphones and feature phones, as well as the tablet market and the ultrabook portion of the PC market.

Our human interface solutions are intended to satisfy our customers’ specification needs, including features and functionality, industrial design, mechanical, and electrical requirements. Our products also offer unique integration options, including allowing our capacitive sensors to be placed underneath the plastic of the device, which allows for streamlined and stylized designs, and LED integration to indicate status or enhance industrial design.

Our emphasis on technological leadership and design capabilities positions us to provide unique human interface solutions that address specific customer requirements. Our long-term working relationships with large, global OEMs provide us with experience in satisfying their demanding design specifications and other requirements. Our custom product solutions provide OEMs with numerous benefits, including the following:

 

   

system integration;

 

   

reduced product development costs;

 

   

shorter product time to market;

 

   

compact and efficient platforms;

 

   

improved product functionality and utility; and

 

   

product differentiation.

We work with our customers in order to meet their technical and functional specifications, their industrial design requirements, and their desire to differentiate their products from those of their competitors. This collaborative effort reduces the duplication and overlap of investment and resources, enabling our OEM customers to devote more time and resources to the market development of their products.

 

4


Table of Contents

We utilize capacitive technology rather than resistive or mechanical technology in our product solutions. Unlike resistive and mechanical technology, our solid-state capacitive technology has no moving parts and does not require activation force, thereby providing a durable, more reliable solution that can be integrated into both curved and flat surfaces. Capacitive technologies also allow for much thinner sensors than resistive or mechanical technology, providing for slimmer, more compact and unique industrial designs.

Products

Our family of product solutions allows our customers to solve their interface needs and differentiate their products from those of their competitors.

TouchPad

Our TouchPad, which takes the place and exceeds the functionality of a mouse, is a small, touch-sensitive pad that senses the position and movement of one or more fingers on its surface through the measurement of capacitance. Our TouchPad provides an accurate, comfortable, and reliable method for screen navigation, cursor movement, and gestures and provides a platform for interactive input for both the consumer and corporate markets. Our TouchPad solutions allow our customers to provide stylish, simple, user-friendly, and intuitive human interface solutions. Our TouchPad solutions offer various advanced features, including the following:

 

   

Scrolling. Our TouchPad permits the user to customize the scrolling feature as One Finger Scrolling, Two-Finger Scrolling, or ChiralMotion™ Scrolling based on their preference.

 

   

Customizable tap zones. These zones permit designated portions of the TouchPad to be used to simulate mouse clicks, launch applications, and perform other selected functions.

 

   

Performance of entertainment, productivity, and media tasks. Our Scrybe™ enables the user to quickly perform common entertainment, productivity, and media tasks using simple, easy-to-remember gestures on the TouchPad. Scrybe can be downloaded free-of-charge and used with most of our modern TouchPad sensors.

 

   

Tapping and dragging of icons. This feature allows the user to simply tap and hold on an icon in order to drag it, rather than being forced to hold a button down in order to drag an icon.

 

   

Device interaction. Our Gesture Suite™ provides users with a customizable way to address productivity and to interact with their notebook systems through the TouchPad. Some of these gestures include Pinch for Zoom, Rotate, Three-Finger Flick, and many others.

Our TouchPad solutions are available in a variety of sizes, electrical interfaces, and thicknesses. Our TouchPad solutions are designed to meet the electrical and mechanical specifications of our customers. Customized firmware and driver software ensure the availability of specialized features. As a result of their solid state characteristics, our TouchPad solutions have no moving parts that wear out, resulting in a robust and reliable input solution that also allows for unique industrial designs.

ClickPad

Our ClickPad introduces a clickable mechanical design to the TouchPad application that eliminates the need for physical buttons. The buttonless design of our ClickPad allows for unique, intuitive industrial design and makes it an excellent alternative to conventional input and navigation devices. Our ClickPad is activated by pressing down on the internal tact switch to perform a left-button or right-button clicks and provides tactile feedback similar to pressing a physical button. The latest version of ClickPad features ClickEQ, a mechanical solution that provides uniform click depth to maximize the surface area available for gestures and improve click performance over hinged designs.

ForcePad

Our ForcePad is a thinner version of our ClickPad, which introduces a new dimension in control through the addition of variable force sensitivity. ForcePad is designed to provide consistent performance across OEM models through its design intelligence and self-calibration features. By varying the amount of force applied, ForcePad is engineered to enable more intuitive and precise user interactions in operating system controls and applications. Designed with ultrabooks in mind, ForcePad is 40% thinner than a conventional touch pad.

 

5


Table of Contents

Dual Pointing Solutions

Our dual pointing solutions offer a TouchPad with a pointing stick in a single notebook computer, enabling users to select their interface of choice. Our dual pointing solutions also provide the end user the ability to use both interfaces interchangeably. Our dual pointing solutions provide the following advantages:

 

   

cost-effective and simplified OEM integration;

 

   

simplified OEM product line because one device contains both solutions;

 

   

single-source supplier, which eliminates compatibility issues; and

 

   

end user flexibility because one notebook can address both user preferences.

We have developed two solutions for use in the dual pointing market. Our first solution integrates all the electronics for controlling a third-party resistive strain gauge pointing stick onto our TouchPad PCB. This solution simplifies OEM integration by eliminating the need to procure the pointing stick electronics from another party and physically integrate them into the notebook. Our second dual pointing solution uses our TouchStyk rather than a third-party pointing stick and offers the same simplified OEM integration. The second solution is a completely modular design, allowing OEMs to offer TouchPad-only, TouchStyk-only, or dual pointing solutions on a build-to-order basis.

TouchStyk

Our TouchStyk is a proprietary pointing stick interface solution for PC notebooks. TouchStyk is a self-contained, easily integrated module that uses capacitive technology similar to that of our TouchPad. TouchStyk is enabled with press-to-select and tap-to-click capabilities and can be easily integrated into multiple computing and communications devices. In addition, our design greatly reduces susceptibility to electromagnetic interference, thereby providing greater pointing accuracy and preventing the pointer from drifting when not in use. Our modular approach allows OEMs to include our TouchPad, our TouchStyk, or a combination of both interfaces (dual pointing) in their products.

NavPoint

Our NavPoint solution offers TouchPad functionality for small form factor devices for improved usability and versatility in accessing and managing content in handheld devices through unique navigation controls, including short- and long-distance scrolling features, tapping, and mouse-like cursor navigation.

ClearPad

We typically sell our ClearPad solution as a chip or tail, together with customer-specific firmware, to sensor manufacturers to use in the production of discrete touchscreen products. A discrete touchscreen product typically consists of a transparent, thin capacitive sensor that can be placed over any display, such as a Liquid Crystal Display, or LCD, or an Organic Light Emitting Diode, or OLED, and combined with a flexible circuit material and a touch controller chip. Similar to our traditional TouchPad, our ClearPad has distinct advantages, including low-profile form factor; high reliability, durability, and accuracy; and low power consumption. ClearPad enables the user to interact directly with the display on electronic devices, such as mobile smartphones and feature phones and tablets.

Our ClearPad Series 3 product family can provide full-time tracking of ten or more fingers simultaneously and features stylus support and support for various sensor configurations, including traditional discrete sensors, sensor-on-lens, which includes sensor electrodes patterned on the bottom of the glass cover lens; on-cell, which includes sensor electrodes patterned on the display glass; and in-cell, which includes sensor electrodes patterned inside the LCD glass. Our ClearPad Series 1 and 2 product families provide a low-profile form factor, high reliability, durability, accuracy, and low power consumption for feature-based and mass-market handsets.

 

6


Table of Contents

Our ClearPad Series 4 product family combines our proprietary capacitive multi-touch technology with a device’s display driver in a single-chip solution delivering advanced display noise management and improved capacitive sensing performance. Our display integration on-cell and in-cell solutions provide cost-effective, capacitive, multi-touch interfaces for mobile devices and enables thinner form factors.

Our ClearPad Series 7 product family is designed to meet the requirements of the large touchscreen market for products more closely related to clamshell notebooks, slates, tablets, and similar devices. Our ClearPad Series 7 products include low-cost, single-chip touchscreen solutions and multi-chip touchscreen solutions designed for devices that have more demanding user input requirements, such as gaming applications.

FlexPad

This capacitive sensing interface is mounted beneath a mechanical keypad and allows the keypad surface to be used for advanced scrolling and navigation features, character entry, and advanced gesture input on handheld devices. With navigation functionality similar to a touch pad, FlexPad offers interface and industrial design differentiation while improving device interaction.

ClearButtons

Our ClearButton product is an extension of our core capacitive sensing technology that has been used in TouchPad solutions for notebook PCs, mobile smartphones, and feature phones. A ClearButton is a clear sensor that can be mounted under plastic, providing OEMs with easy integration and attractive design options for scrolling and buttons.

TouchButtons

Our TouchButton product provides capacitive button and scrolling controls for an easy-to-use and stylish interface solution designed to replace mechanical buttons. Button arrays and ScrollStrips can be programmed to perform various functions, such as controls for multimedia, display and device settings in notebook PCs, multimedia keyboards, MP3 players, digital photo frames, monitors, and other digital lifestyle products. TouchButton interfaces are designed for integration under the plastic face of a device, allowing for a sealed, durable, and thin design, which can be coupled with LED animation. OEMs can incorporate TouchButtons into their products by either designing their own button controls, scrolling controls, or a combination of button and scrolling controls using an ASIC-based solution or through our custom-designed interface module.

ThinTouchTM

ThinTouch is a design technology employing an innovative ramp capability that delivers a full keyboard solution that is 40% thinner than traditional keyboard solutions. ThinTouch provides an innovative design architecture that facilitates improved backlighting, reliability, and improved manufacturability when compared to conventional mechanical keyboards. By combining our TouchPad technology with ThinTouch technology, we expect to deliver a complete keyboard solution targeted for the next generation of thin and light notebook PC form factors, including ultrabooks.

Capabilities

Our products are supported by a variety of feature capabilities allowing for further product differentiation and easy customer integration.

Design Studio™

Design Studio 4 provides customers an advanced and comprehensive touch system tool set, designed to enable the customer to evaluate touch system performance and efficiently implement its ClearPad touchscreen solution.

SignalClarity Technology

SignalClarity technology provides an improved signal-to-noise ratio for enhanced touch detection and noise immunity and enables mobile smartphone and feature phone OEMs to support inexpensive chargers and work with multiple display types. SignalClarity technology works with multidisplay configurations, including discrete sensors, sensor-on-lens, on-cell, and in-cell stackup solutions.

 

7


Table of Contents

Synaptics Gesture Suite

Our Synaptics Gesture Suite, or SGSTM, provides users with an intuitive way to interact productively with their notebook computers. SGS was developed by analyzing the most common workflows from entertainment activities, such as viewing photos and listening to music, to productivity activities, such as accessing emails and presentations. The result is an intelligent usability model that makes it intuitive for consumers to understand and discover features easily, resulting in a better user experience. SGS represents a growing portfolio of gestures available on our interface solutions. These gestures are compatible with a wide range of Microsoft Windows and Linux applications to enhance the value and productivity of notebook PCs and peripheral devices that use our TouchPads. Gestures currently in the market include Pinch, Rotate, ChiralMotion Scrolling, Two-Finger Scrolling, Three-Finger Flick, Three-Finger Down, and Four-Finger Flick.

Enhanced Gesture Recognition™

Our Enhanced Gesture Recognition is a suite of ClearPad gestures included in our firmware. Customers can easily enable SingleTouch gestures, such as Tap, Double Tap, Press, and Flick; DualTouch gestures, such as Pinch and Pivot Rotate; and multi-finger gestures for ClearPad directly from our touch module firmware. No additional recognition software is required on the host processor to implement these gestures. This approach lowers host processor resource requirements and ensures that gestures are implemented using our proven pattern-recognition technology.

Dual Mode for TouchPad

Our Dual Mode-enabled TouchPad interface allows a user to switch between cursor control and icon-based controls on the TouchPad surface. In default mode, a Dual Mode-enabled TouchPad provides the same cursor control for on-screen navigation as a standard TouchPad. When the user taps on a launch icon located on the TouchPad surface, control icons illuminate on the TouchPad surface.

Dual Mode functionality offers OEMs a variety of customization options, including tap zones for launching applications and multimedia controls, scrolling zones to adjust volume, and programmable buttons to enable end users to choose their application of choice to launch through our Dual Mode driver. To regain cursor control, the user simply taps the mode switch button and the illuminated icons disappear, allowing the user to control the cursor for on-screen navigation.

Proximity Sensing

Our proximity sensing technology enables users to interact with consumer electronics without touch. With this technology, sensors in a device, such as a notebook PC, mobile phone, peripheral, or digital photo frame, sense the presence of a user’s hand to activate a function. These sensors can illuminate LEDs for discoverable buttons, immediately wake devices from power-saving mode, or activate other functionality.

ChiralMotion Gesture

With our ChiralMotion Gesture technology, the user can apply one continuous circular motion to initiate precise and fine-tuned scrolling on any two-dimensional input surface, such as our TouchPad and ClearPad solutions.

ChiralMotion Gesture technology is well suited for small handheld products, such as feature-rich mobile handsets, personal navigation systems, and personal media players that require easy access for entertainment, music, and other digital files. Scrolling through long documents or pages on a notebook PC becomes simple when using a TouchPad enhanced with ChiralMotion and reversing the direction of scrolling simply requires the user to reverse the circular motion of their finger.

 

8


Table of Contents

InterTouch

Our InterTouch utilizes a high bandwidth internal subsystem to communicate commands between the touch pad and the host processor enabling Multi-Touch “Full-Time Finger Tracking,” for a better finger gesture-based user experience. InterTouch enhances the performance of our image-sensing TouchPad products, which can provide full-time tracking of ten or more fingers simultaneously, and is not possible with a lower-speed legacy PS/2 interface. InterTouch uses existing industry standard, higher-speed subsystem interfaces, which will be available to any OEM and any touch pad provider. Additional InterTouch capabilities include the following:

 

   

Cross Platform and Brands. Our InterTouch will work with all of our TouchPads and ClickPads.

 

   

Enhanced Gestures. This feature allows multi-finger gesture tracking and counting.

 

   

Re-flash/Re-programmability. Our InterTouch substantially increases data throughput, which provides fast re-flash times.

Our InterTouch is designed for full compatibility with current and future Windows platforms, and we anticipate it also will be supported on Linux-based platforms in future releases.

Technologies

We have developed and own an extensive array of technologies, encompassing ASICs, firmware, software, mechanical and electrical designs, display systems, pattern recognition, and touch-sensing technologies. With 127 U.S. patents in force and 171 U.S. patents pending, as well as many non-U.S. counterparts, we continue to develop technology in these areas. We believe these technologies and the related intellectual property rights create barriers for competitors and allow us to provide human interface solutions in a variety of high-growth markets.

Our broad line of human interface solutions currently is based upon the following key technologies:

 

   

capacitive position sensing technology;

 

   

capacitive force sensing technology;

 

   

transparent capacitive position sensing technology;

 

   

pattern recognition technology;

 

   

mixed-signal integrated circuit technology;

 

   

display systems and circuit technology;

 

   

multi-touch technology;

 

   

proprietary microcontroller technology; and

 

   

ThinTouch technology.

In addition to these technologies, we develop firmware and device driver software that we incorporate into our products, which provide unique features, such as virtual scrolling, customizable tap zones, PalmCheck, EdgeMotion, and tapping and dragging of icons. In addition, our ability to integrate all of our products to interface with major operating systems, including Windows, Android, Google Chrome, Unix, and Linux, provides us with a competitive advantage.

Capacitive Position Sensing Technology. This technology provides a method for sensing the presence, position, and contact area of one or more fingers or a stylus on a flat or curved surface. Our technology works with very light touch, supports full multi-touch capabilities, and provides highly responsive cursor navigation, scrolling, and selection. It uses no moving parts, can be implemented under plastic, and is extremely durable.

 

9


Table of Contents

Capacitive Force Sensing Technology. This technology senses the direction and magnitude of a force applied to an object. The object can either move when force is applied, like a typical joystick used for gaming applications, or it can be isometric, with no perceptible motion during use, like our TouchStyk. The primary competition for this technology is resistive strain gauge technology. Resistive strain gauge technology requires electronics that can sense very small changes in resistance, presenting challenges to the design of that circuitry, including sensitivity to electrical noise and interference. Our electronic circuitry determines the magnitude and direction of an applied force, permits very accurate sensing of tiny changes in capacitance, and minimizes electrical interference from other sources.

Transparent Capacitive Position Sensing Technology. This technology allows us to build transparent sensors for use with our capacitive position sensing technology, such as in our ClearPad. It has all the advantages of our capacitive position sensing technology and allows for visual feedback when incorporated with a display device, such as an LCD. Our technology supports full multi-touch, does not require calibration, does not produce undesirable internal reflections, and has reduced power requirements, allowing for longer battery life.

Pattern Recognition Technology. This technology is a set of software algorithms and techniques for converting real-world data, such as gestures and handwriting, into a digital form that can be recognized and manipulated within a computer. Our technology provides reliable gesture decoding and handwriting recognition, and can be used in other applications such as signature verification for a richer user experience.

Mixed-Signal Integrated Circuit Technology. This hybrid analog-digital integrated circuit technology combines the power of digital computation with the ability to interface with non-digital, real-world signals, such as the position of a finger or stylus on a surface. Our patented design techniques permit us to utilize this technology to optimize our core ASIC engine for all our products. Our mixed-signal technology consists of a broad portfolio of circuit expertise in areas such as the following:

 

   

precision capacitance measurement

 

   

power management (switching converters, charge pumps, and Low-dropout regulators (“LDOs”))

 

   

analog-to-digital and digital-to-analog converters

 

   

LCD source and Vcom drivers

 

   

high-speed serial interfaces

 

   

display timing controllers (“TCONs”)

 

   

SRAM, DRAM, and non-volatile memories

 

   

VLSI digital circuits with multiple clock and power domains

 

   

communications and signal processing circuits

Display Systems and Circuit Technology. This technology enables us to develop optimized human interface solutions with improved compatibility with their application environments. This technology consists of mobile and large format display semiconductor expertise, including the following functional blocks:

 

   

TCONs

 

   

TFT gamma references

 

   

Vcom drivers

 

   

source drivers

 

   

high-speed serial interfaces such as MIPI DSI and Qualcomm MDDI

 

   

display power circuits such as inductive switchers, charge pumps, and LDOs

 

10


Table of Contents

This technology also enables us to develop advanced products that combine the functions of the display and touch sensing systems to enable highly integrated display and touch functionality with improved performance, thinner form factors, and lower system cost.

Proprietary Microcontroller Technology. One example of this technology is our proprietary 16-bit microcontroller core that is embedded in the digital portion of our mixed signal ASIC, which allows us to optimize our ASIC for position sensing tasks. Our embedded microcontroller provides great flexibility in customizing our products via firmware, which eliminates the need to design new circuitry for each new application.

Competing Technology

Many human interface solutions currently utilize resistive sensing technology. Resistive sensing technology consists of a flexible membrane above a flat, rigid, electrically conductive surface. When finger or stylus pressure is applied to the membrane, it deforms until it makes contact with the rigid layer below, at which point attached electronics can determine the position of the finger or stylus. Since the flexible membrane is a moving part, it is susceptible to mechanical wear and will eventually suffer degraded performance. Due to the way that such resistive position sensors work, it is not possible for them to detect more than a single finger or stylus at any given time. The positional accuracy of a resistive sensor is limited by the uniformity of the resistive coating as well as by the mechanics of the flexible membrane. Finally, using resistive technology over displays, like LCDs, results in reduced display brightness, requiring the use of higher power backlighting and thereby reducing the battery life of the device.

Research and Development

We conduct ongoing research and development programs that focus on advancing our technologies, developing new products, improving design and manufacturing processes, and enhancing the quality and performance of our product solutions. Our goal is to provide our customers with innovative solutions that address their needs and improve their competitive positions. Our research and development focuses on advancing our existing interface technologies, improving our current product solutions, and expanding our technologies to serve new markets. Our long-term vision is to offer human interface solutions, such as touch, handwriting, vision, and voice capabilities, that can be readily incorporated into varied electronic devices.

Our research and development programs focus on the development of accurate, easy to use, reliable, and intuitive human interfaces for electronic devices. We believe our innovative interface technologies can be applied to many diverse products. We believe the interface is a key factor in the differentiation of these products. We believe that our interface technologies enable us to provide customers with product solutions that have significant advantages over alternative technologies in terms of functionality, size, power consumption, durability, and reliability. We also intend to pursue strategic relationships and acquisitions to enhance our research and development capabilities, leverage our technology, and shorten our time to market with new technological applications.

Our research, design, and engineering teams frequently work directly with our customers to design custom solutions for specific applications. We focus on enabling our customers to overcome technical barriers and enhance the performance of their products. We believe our engineering know-how and electronic systems expertise provide significant benefits to our customers by enabling them to concentrate on their core competencies of production and marketing.

As of the end of fiscal 2012, we employed 461 people in our technology, engineering, and product design functions in the United States, Taiwan, Hong Kong, Korea, Japan, and China. Our research and development expenses were approximately $118.0 million, $105.0 million, and $86.6 million in fiscal 2012, 2011, and 2010, respectively.

Intellectual Property Rights

Our success and ability to compete depend in part on our ability to maintain the proprietary aspects of our technologies and products. We rely on a combination of patents, copyrights, trade secrets, trademarks, confidentiality agreements, and other contractual provisions to protect our intellectual property, but these measures may provide only limited protection. Our research, design, and engineering teams frequently work directly with our OEM customers to design custom solutions for specific applications.

 

11


Table of Contents

We hold 127 U.S. patents in force and have 171 U.S. patents pending, as well as many non-U.S. counterparts to the U.S. patents and U.S. patents pending. Collectively, these patents and patents pending cover various aspects of our key technologies, including touch sensing, pen sensing, handwriting recognition, customizable tap zones, edge motion, and virtual scrolling technologies. Our proprietary software is protected by copyright laws and the source code for our proprietary software is protected under applicable trade secret laws.

Our extensive array of technologies includes ASICs, firmware, software, and pattern recognition and position sensing technologies. Our products rely on a combination of these technologies, making it difficult to use any single technology as the basis for replicating our products. Furthermore, the length and customization of the customer design cycle serve to protect our intellectual property rights.

Patent applications that we have filed or may file in the future may not result in a patent being issued. Our issued patents may be challenged, invalidated, or circumvented, and claims of our patents may not be of sufficient scope or strength, or issued in the proper geographic regions, to provide meaningful protection or any commercial advantage. We have not applied for, and do not have, any copyright registration on our technologies or products. We have applied to register certain of our trademarks in the United States and other countries. There can be no assurance that we will obtain registrations of trademarks in key markets. Failure to obtain registrations could compromise our ability to protect fully our trademarks and brands and could increase the risk of challenge from third parties to our use of our trademarks and brands. In addition, our failure to enforce and protect our intellectual property rights or obtain from third parties the right to use necessary technology could have a material adverse effect on our business, financial condition, and operating results.

We do not consistently rely on written agreements with our customers, suppliers, manufacturers, and other recipients of our technologies and products, and therefore some trade secret protection may be lost and our ability to enforce our intellectual property rights may be limited. Furthermore, our customers, suppliers, manufacturers, and other recipients of our technologies and products may seek to use our technologies and products without appropriate limitations. In the past, we did not consistently require our employees and consultants to enter into confidentiality, employment, or proprietary information and invention agreements. Therefore, our former employees and consultants may try to claim some ownership interest in our technologies and products and may use our technologies and products competitively and without appropriate limitations.

Other companies, including our competitors, may develop technologies that are similar or superior to our technologies, duplicate our technologies, or design around our patents and may have or obtain patents or other proprietary rights that would prevent, limit, or interfere with our ability to make, use, or sell our products. Effective intellectual property protection may be unavailable or limited in some foreign countries in which we operate, such as China and Taiwan. Unauthorized parties may attempt to copy or otherwise use aspects of our technologies and products that we regard as proprietary. There can be no assurance that our means of protecting our proprietary rights in the United States or abroad will be adequate or that competitors will not independently develop similar technologies. If our intellectual property protection is insufficient to protect our intellectual property rights, we could face increased competition in the market for our technologies and products.

We may receive notices from third parties that claim our products infringe their rights. From time to time, we receive notice from third parties of the intellectual property rights such parties have obtained. We cannot be certain that our technologies and products do not and will not infringe issued patents or other proprietary rights of third parties. Any infringement claims, with or without merit, could result in significant litigation costs and diversion of resources, including the payment of damages, which could have a material adverse effect on our business, financial condition, and operating results.

Customers

Our customers include many of the world’s largest mobile smartphone and feature phone and PC OEMs, based on unit shipments, as well as a variety of consumer electronics manufacturers. Our demonstrated track record of technological leadership, design innovation, product performance, cost effectiveness, and on-time delivery have resulted in our leadership position in providing human interface solutions. We believe our strong relationship with our OEM customers, many of which are also currently developing tablets, ultrabooks, and digital lifestyle products, will continue to position us as a source of supply for their product offerings.

 

12


Table of Contents

Our industry-leading OEM customers in fiscal 2012 included the following:

 

•      Acer

•      Asustek

•      Dell

•      Hewlett-Packard

•      HTC

•      Huawei

•      Lenovo

  

•      LG Electronics

•      Nokia

•      Samsung

•      Sharp

•      Sony Mobile

•      Toshiba

•      ZTE

We generally supply custom-designed products to our OEM customers through their contract manufacturers or supply chain. We sell our custom-designed products directly to these contract manufacturers, some of which include BYD, Compal, Inventec, LGIT, Pegatron, Quanta, TPK, Wintek, and Wistron. Sales to TPK accounted for approximately 12% of our net revenue for fiscal 2012. Sales to Zhan Yun Shanghai Electronics and Compal accounted for approximately 11% and 10%, respectively, of our net revenue for fiscal 2010. No customer accounted for more than 10% of our net revenue for fiscal 2011.

We consider both the OEMs and their contract manufacturers or supply chain partners to be our customers. Both the OEMs and their partners may determine the design and pricing requirements and make the overall decision regarding the use of our human interface solutions in their products. The contract manufacturers place orders with us for the purchase of our products, take title to the products purchased upon shipment by us, and pay us directly for those purchases. These customers have no return privileges except for warranty provisions.

Strategic Relationships

We have used strategic relationships to enhance our ability to offer value-added customer solutions in the past. We intend to enter into additional strategic relationships with companies that may help us serve our target markets.

Sales and Marketing

We sell our product solutions for incorporation into the products of our OEM customers. We generate sales through direct sales employees as well as outside sales representatives and distributors. Our sales personnel receive substantial technical assistance and support from our internal engineering resources because of the highly technical nature of our product solutions. Sales frequently result from multi-level sales efforts that involve senior management, design engineers, and our sales personnel interacting with our customers’ decision makers throughout the product development and order process.

As of the end of fiscal 2012, we employed 140 sales and marketing professionals. We maintain nine customer support offices domestically and internationally, which are located in the United States, Taiwan, China, Korea, Japan, and Switzerland. In addition, we utilize sales representatives/sales distributors in China, Japan, and Taiwan.

International sales constituted approximately 99% of our revenue for each of fiscal 2012, 2011, and 2010. Approximately 76% of our sales were made to companies located in China and Taiwan that provide design and manufacturing services for major notebook computer and digital lifestyle product OEMs. All of our sales were denominated in U.S. dollars. This information should be read in conjunction with Note 11 to the financial statements contained elsewhere in this report.

Manufacturing

We employ a virtual manufacturing platform through third-party relationships. We currently utilize three semiconductor wafer manufacturers to supply us with silicon wafers integrating our proprietary design specifications. The completed silicon wafers are forwarded to third-party package and test processors for further processing into die and packaged ASICs, as applicable, which are then utilized in our custom interface products or processed as our ASIC-based solution.

After processing and testing, the die and ASICs are consigned to various contract manufacturers for assembly or are shipped directly to our customers. During the assembly process, our die or ASIC is combined with other components to complete the module for our custom human interface solution. The finished assembled product is subsequently shipped by our contract manufacturers directly to our customers for integration into their products.

 

13


Table of Contents

We believe our virtual manufacturing strategy provides a scalable business model; enables us to concentrate on our core competencies of research and development, technological advances, and product design and engineering; and reduces our capital expenditures. In addition, this strategy significantly reduces our working capital requirements for inventory because we do not incur most of our manufacturing costs until we have actually shipped our interface products to our customers and billed those customers for those products.

Our third-party contract manufacturers and semiconductor fabricators are Asian-based organizations. We provide our contract manufacturers with six-month rolling forecasts of our production requirements. We do not, however, have long-term agreements with any of our contract manufacturers that guarantee production capacity, prices, lead times, or delivery schedules. Our reliance on those parties exposes us to vulnerability owing to our dependence on few sources of supply. We believe, however, that other sources of supply are available. In addition, we may establish relationships with other contract manufacturers in order to reduce our dependence on any one source of supply.

Periodically, we purchase inventory from our contract manufacturers when a customer delays its delivery schedule or cancels its order. In those circumstances in which our customer has cancelled its order and we purchase inventory from our contract manufacturers, we consider a write-down to reduce the carrying value of the inventory purchased to its net realizable value. We charge write-downs to reduce the carrying value of obsolete, slow moving, and non-usable inventory to net realizable value to cost of revenue. We also record a liability and charge to cost of revenue for estimated losses on inventory we are obligated to purchase from our contract manufacturers when such losses become probable from customer delays or order cancellations.

Backlog

As of the end of fiscal 2012, we had a backlog of orders of $49.5 million, a decrease of $26.5 million compared with a backlog of orders as of the end of fiscal 2011 of $76.0 million. The mix of products ordered by customers at the end of fiscal 2012 had a slightly lower average selling price than those ordered at the end of fiscal 2011, and the quantity on backlog was significantly lower due to soft markets for both the PC market and the digital lifestyle product markets in the fourth quarter of fiscal 2012 compared with the fourth quarter of fiscal 2011, resulting in the decrease in backlog. Our backlog consists of product orders for which purchase orders have been received and which are scheduled for shipment in the subsequent quarter. Most orders are subject to rescheduling or cancellation with limited penalties. Because of the possibility of customer changes in product shipments, our backlog as of a particular date may not be indicative of net sales for any succeeding period.

Competition

Our principal competitors in the sale of notebook touch pads are Alps Electric, a Japanese conglomerate, and Elan Microelectronics, a Taiwanese company, and our principal competitor in the sale of notebook pointing sticks is Alps. In the markets for digital lifestyle products and other electronic devices, our competitors include Atmel, Cypress, Melfas, and various other companies involved in human interface solutions. In certain cases, large OEMs may develop alternative human interface solutions for their own products or provide key components for use in designing human interface solutions.

In the human interface markets for digital lifestyle products and other electronic devices, we compete primarily based on the advantages of our systems knowledge of capacitive sensing and pattern recognition technologies. We believe our solutions-based systems engineering experience coupled with our technologies offer benefits in terms of size, power consumption, durability, light transmissivity, resolution, ease of use, and reliability when compared to our competitors and other technologies. While these markets continue to evolve, we believe we are positioned to compete aggressively for this business based on our proven track record, our technology roadmap, our marquee global customer base, and our reputation for design innovation. New competitors, alliances among competitors, or alliances among competitors and OEMs also may emerge and allow competitors to rapidly acquire significant market share.

In the notebook human interface market, we plan to continue to compete primarily on the basis of our technological expertise, design innovation, technology roadmap, customer service, and the long track record of performance of our human interface solutions, including their ease of use, reliability, and cost-effectiveness as well as their timely design, production, and delivery schedules. Our pointing stick solutions, including our proprietary TouchStyk, enable us to address the notebook computer market that uses dual pointing interfaces.

 

14


Table of Contents

Furthermore, our competitors or our customers may develop technologies in the future that more effectively address the human interface needs of the notebook computer market and digital lifestyle product markets. Our sales, profitability, and success depend on our ability to compete with other suppliers of human interface solutions and components used in human interface solutions. Our competitive position could be adversely affected if one or more of our current OEMs reduce their orders or if we are unable to develop new customers for our human interface solutions.

Employees

As of the end of fiscal 2012, we employed a total of 697 persons, including 96 in operations, finance, and administration; 140 in sales and marketing; and 461 in research and development. Of these employees, 418 were located in North America, 273 in Asia/Pacific, and six in Europe. We consider our relationship with our employees to be good, and none of our employees are represented by a union in collective bargaining with us.

Competition for qualified personnel in our industry is extremely intense, particularly for engineering and other technical personnel. Our success depends on our continued ability to attract, hire, and retain qualified personnel.

Executive Officers

The following table sets forth certain information regarding our executive officers as of August 24, 2012:

 

Name

  

Age

  

Position

Richard A. Bergman    48    President and Chief Executive Officer, and Director
Kathleen A. Bayless    56    Senior Vice President, Chief Financial Officer, Secretary, and Treasurer
Kevin D. Barber    52    Senior Vice President and General Manager, Handheld Products
David B. Long    51    Senior Vice President of World Wide Sales
Bret C. Sewell    51    Senior Vice President of Corporate Development
Stanley A. Swearingen    52    Senior Vice President of Strategic Technology
Alex Wong    57    Senior Vice President of World Wide Operations
Mark N. Vena    50    Senior Vice President and General Manager, PC Products

Richard A. Bergman has been President and Chief Executive Officer of our company since September 2011. Prior to joining our company, Mr. Bergman was Senior Vice President and General Manager of Advanced Micro Device’s (“AMD”) Product Group from May 2009 to September 2011. From October 2006 to May 2009, Mr. Bergman served as Senior Vice President and General Manager of AMD’s Graphics Product Group. Mr. Bergman’s career at AMD began in October 2006 when AMD acquired ATI Technologies (“ATI”), where he served as Senior Vice President and General Manager of PC Group. Prior to ATI, Mr. Bergman served as Chief Operating Officer at S3 Graphics, a division of SonicBlue Inc. Mr. Bergman has held senior level management positions in the technology field since his early roles at Texas Instruments, Inc. and IBM. Mr. Bergman holds a Bachelor of Science degree in electrical engineering from the University of Michigan and a Master’s Degree in Business Administration from the University of Colorado.

 

15


Table of Contents

Kathleen A. Bayless has been Senior Vice President, Chief Financial Officer, Secretary, and Treasurer of our company since September 2009. Ms. Bayless served as the Senior Vice President – Finance of our company from March 2009 to September 2009. Ms. Bayless spent 13 years at Komag, a leading supplier of thin-film disks to the disk drive industry, where she served most recently as Executive Vice President, Secretary, and Chief Financial Officer beginning in September 2002. Prior to joining Komag, Ms. Bayless held the position of Senior Audit Manager at the public accounting firm of Ernst & Young. Ms. Bayless holds a Bachelor of Science degree from California State University Fresno and is a certified public accountant.

Kevin D. Barber has been Senior Vice President and General Manager of Handheld Products of our company since January 2011. Prior to joining our company, Mr. Barber was Chief Executive Officer of ACCO Semiconductor since 2008. From 2007 to 2008, Mr. Barber served as a principal consultant at PRTM focused on the electronics industry. Mr. Barber was Senior Vice President, General Manager of the Mobile Solutions business at Skyworks Solutions from 2003 to 2006 where he was responsible for delivering innovative RF products to the mobile industry. Mr. Barber was Senior Vice President of Operations at Skyworks Solutions from 2002 to 2003 and Conexant Systems from 2001 to 2002. Previously, Mr. Barber held various senior operations positions at Conexant Systems and Rockwell Semiconductor. Mr. Barber holds a Bachelor of Science in Electrical Engineering from San Diego State University and Masters of Business Administration from Pepperdine University.

David B. Long has been Senior Vice President of World Wide Sales of our company since July 2010. Mr. Long served as Vice President of World Wide Sales of our company from January 2008 to July 2010. Prior to joining our company, Mr. Long served as Vice President of Worldwide Sales for Consumer Products at LSI Logic Corporation where he directed the management of sales and customer support for standard and custom silicon solutions from 2006 to 2007. From 2003 to 2006, Mr. Long served as the Vice President of Asia Pacific Sales of LSI, focusing on the Consumer and Storage product segments. Mr. Long was the Director of North American-West Sales for LSI Operations from 2002 to 2003. Mr. Long also managed LSI’s worldwide account with Cisco Systems from 1998 until 2002, directing an extended team of sales, engineering, marketing, operations, and customer service representatives. Mr. Long holds a Bachelor’s degree in Business Administration/Marketing Management from California Polytechnic University, San Luis Obispo.

Bret C. Sewell has been Senior Vice President of Corporate Development of our company since May 2012. Prior to joining our company, Mr. Sewell served as Executive Vice President at Coulomb Technologies from 2010 to 2011, and served as Chief Executive Officer of Venturi Wireless from 2005 to 2007 and Kiwi Networks from 2003 to 2004. After SnapTrack’s acquisition by Qualcomm, he served as president of Qualcomm’s SnapTrack subsidiary and Senior Vice President in Qualcomm’s semiconductor division. Earlier in his career, Mr. Sewell served as general manager for the Asia Pacific divisions of Octel Communications and Aspect Telecommunications. Mr. Sewell holds a Master of Business Administration from the Wharton School of the University of Pennsylvania, a Master of Arts in International Studies from the University of Pennsylvania, and a Bachelor of Arts in Biological Anthropology from Harvard University.

Stanley A. Swearingen has been Senior Vice President of Strategic Technology of our company since July 2010. Mr. Swearingen was also responsible for corporate development from July 2010 through May 2012. Prior to joining our company, Mr. Swearingen served as a member of the Office of the President at MiniCircuits from March 2009 to October 2009 where he was responsible for strategy and corporate development. From August 2004 to November 2008, Mr. Swearingen was the Vice President and General Manager of the Linear Product business unit at Skyworks Solutions, Inc., which designs, manufactures, sells, and supports a diverse portfolio of RF products and licensing of intellectual property. Mr. Swearingen was Vice President and General Manager of Agere Systems Computing Connectivity division, where he was responsible for the design and manufacturing of wired and wireless connectivity solutions from November 2000 to August 2004. From July 1999 to November 2000, Mr. Swearingen served as Chief Executive Officer of Quantex Microsystems, a direct provider of personal computers, servers, and Internet infrastructure products. Mr. Swearingen has also held senior management positions at National Semiconductor, Cyrix, and Digital Equipment Corp.

Alex Wong has been Senior Vice President of World Wide Operations of our company since July 2010. Mr. Wong served as Vice President of World Wide Operations of our company from September 2006 to July 2010. From 2003 to 2006, Mr. Wong served our company as Managing Director of Hong Kong and Director of Operations. Prior to joining our company, Mr. Wong held various management positions with National Semiconductor Corporation, including General Manager for National Joint Ventures in China and Hong Kong and Director of Corporate Business Development. Mr. Wong holds a Bachelor of Science degree in Computer Science from California State University at Northridge and a Masters in Business Administration from the University of East Asia, Macau.

 

16


Table of Contents

Mark N. Vena has been Senior Vice President and General Manager, PC Products of our company since July 2010. Mr. Vena served as Vice President, PC Business of our company from April 2007 to July 2010. Prior to joining our company, Mr. Vena served as Vice President of Worldwide Marketing of Alienware from October 2005 to March 2007. From 1982 to 2005, Mr. Vena held various business and product marketing leadership positions at Dell, Compaq, Epson, and IBM. Mr. Vena holds a Bachelor of Arts degree in History, cum laude, from Boston College.

There are no arrangements, understandings, or family relationships pursuant to which our executive officers were selected. There are no related party transactions between us and our executive officers. We have entered into indemnification agreements with our officers and directors.

 

17


Table of Contents
ITEM 1A. RISK FACTORS

You should carefully consider the following factors, together with all the other information included in this report, in evaluating our company and our business.

We currently depend on our human interface solutions for the notebook computer market and digital lifestyle product markets for substantially all of our revenue, and any downturn in sales of these products would adversely affect our business, revenue, operating results, and financial position.

We currently depend on our human interface solutions for the notebook computer market and digital lifestyle product markets for substantially all of our revenue, and any downturn in sales of these products would adversely affect our business, revenue, operating results, and financial position. Net revenue for our human interface solutions for our PC and digital lifestyle products, primarily mobile smartphones and feature phones, accounted for approximately 51% and 49%, respectively, of our net revenue for fiscal 2012, 48% and 52%, respectively, of our net revenue for fiscal 2011, and 59% and 41%, respectively, of our net revenue for fiscal 2010.

A softening of demand in the notebook portion of the PC market, a reduced level of our participation in the notebook portion of the PC market, or a slowdown of growth in the notebook portion of the PC market because of consumer preferences, the emergence of tablet or slate devices and ultrabooks not including our product solutions, or other factors would cause our business, operating results, and financial position to suffer. Similarly, the lack of market acceptance of our product solutions compared with competitive products in the mobile smartphone and feature phone market or our inability to be a leading supplier of human interface solutions for mobile smartphone and feature phone products would have a negative effect on our business, operating results, and financial position.

Net revenue from our human interface solutions for digital lifestyle products has been volatile in the past, and may not increase or be less volatile in the future.

Net revenue from our human interface solutions for digital lifestyle products, particularly mobile smartphones and feature phones and portable digital music players, has been volatile in the past. Our net revenue from our human interface solutions for digital lifestyle products may not increase or be less volatile in the future. Net revenue from our human interface solutions for digital lifestyle products was $270.1 million in fiscal 2012, $309.1 million in fiscal 2011, and $209.2 million in fiscal 2010. Our interface business for digital lifestyle products faces many uncertainties, including our success in enhancing our market share in evolving markets dominated by a limited number of OEMs and market acceptance of our product solutions over competitive product solutions. Our inability to address these uncertainties successfully and to be a leading supplier of human interfaces for digital lifestyle products would negatively affect our business.

We have transitioned a significant portion of our product solutions for the mobile smartphone and feature phone market in fiscal 2012 from full module solutions to chip or tail solutions, which has resulted in lower revenue.

We have transitioned a significant portion of our product solutions for the mobile smartphone and feature phone market from full module solutions to chip or tail solutions, which has resulted in lower revenue. Historically, we provided a significant portion of our mobile smartphone and feature phone customers with a complete touchscreen module, including our proprietary controller ASIC, associated electronics, firmware, software, and systems engineering and design as well as a third-party capacitive sensor and module assembly. As a result of industry factors, many of our customers are moving to either a chip solution in which we offer our proprietary controller ASIC, firmware, software, and systems engineering and design with the customer utilizing third-parties for the associated electronics, sensor, and module assembly or a tail solution in which we offer our proprietary controller ASIC, associated electronics, firmware, software, and systems engineering and design with the customer utilizing third-parties for the sensor and module assembly. During fiscal 2012, our full module solutions for the mobile smartphone and feature phone market declined from approximately 50% of quarterly mobile product revenue in the prior year to approximately 1% of quarterly mobile product revenue. We anticipate that chip solutions will constitute an increased share of mobile product revenue in fiscal 2013 compared with fiscal 2012. Our chip solutions for mobile smartphones and feature phones typically generate lower revenue than our full module solutions.

 

18


Table of Contents

Our historical financial performance is based on net revenue generated from our human interface solutions for the notebook computer market and, more recently, our human interface solutions for digital lifestyle products, and may not be indicative of our future performance.

Our historical financial performance is based on net revenue generated from our human interface solutions for the notebook computer market and, more recently, our human interface solutions for digital lifestyle products, particularly mobile smartphones and feature phones. As recently as fiscal 2008, we derived a large majority of our net revenue from the sale of our TouchPad products for notebook computers. In fiscal 2011, net revenue from our human interface solutions for digital lifestyle products exceeded net revenue from our PC product solutions for the first time in our history. In fiscal 2012, net revenue from our human interface solutions for digital lifestyle products decreased and was less than our net revenue from our PC product solutions. We expect a relatively even revenue mix between sales of our human interface solutions for notebook computers and our human interface solutions for mobile smartphones and feature phones. However, we have a more limited operating history in the markets for digital lifestyle products, including mobile smartphones and feature phones, and limited operating history for other products, such as tablets and ultrabooks. In addition, in fiscal 2012 we transitioned our product solutions for the mobile smartphone and feature phone market from full module solutions to chip or tail solutions and anticipate that chip solutions will be the primary solution during fiscal 2013.

We cannot assure you that our human interface business for new markets will be successful or that we will be able to continue to generate significant revenue from these markets.

Our product solutions may not be successful in new markets despite the fact that these product solutions are capable of enabling people to interact more easily and intuitively with a wide variety of mobile computing, communication, entertainment, and electronic devices in addition to notebook computers and mobile smartphones and feature phones. We are currently targeting the rapidly developing tablet market and the ultrabook portion of the PC market. Our success in these markets will depend primarily on the success in these markets of the products of our OEM customers who utilize our solutions for their products. As a result, we do not know whether our product solutions for the tablet market and the ultrabook portion of the PC market will result in a substantial portion of our revenue on a consistent basis. Our inability to become a leading supplier in the tablet market and the ultrabook portion of the PC market would result in a slower growth rate than we currently anticipate. The failure to succeed in the tablet market and the ultrabook portion of the PC market would result in no return on the substantial investments we have made to date and plan to make in the future to penetrate such markets.

Various target markets for our interfaces, such as tablets, ultrabooks, and automotive touchscreens, may develop slower than anticipated or could utilize competing technologies. The markets for certain of these products depend in part upon the continued development and deployment of wireless and other technologies, which may or may not address the needs of users of these products.

Our ability to generate significant revenue from new markets will depend on various factors, including the following:

 

   

the development and growth of these markets;

 

   

the ability of our technologies and product solutions to address the needs of these markets, the price and performance requirements of OEMs, and the preferences of end users; and

 

   

our ability to provide OEMs with human interface solutions that provide advantages in terms of size, power consumption, reliability, durability, performance, and value-added features compared with alternative solutions.

Many manufacturers of these products have well-established relationships with competitive suppliers. Our ongoing success in these markets will require us to offer better performance alternatives to other solutions at competitive costs. The failure of any of these target markets to develop as we expect, or our failure to serve these markets to a significant extent, will impede our sales growth and could result in substantially reduced earnings. We cannot predict the size or growth rate of these markets or the market share we will achieve in these markets in the future.

 

19


Table of Contents

Market acceptance of our customers’ existing or new products that utilize our human interface solution may decline or may not develop and, as a result, our revenue may decline or may not increase.

We do not sell any products to end users. Instead, we design various human interface solutions that our OEM customers incorporate into their products. As a result, our success depends almost entirely upon the widespread market acceptance of our OEM customers’ products. We do not control or influence the manufacture, promotion, distribution, or pricing of the products that incorporate our human interface solutions. Instead, we depend on our customers to manufacture and distribute products incorporating our human interface solutions and to generate consumer demand through marketing and promotional activities. Even if our technologies successfully meet our customers’ price and performance goals, our sales would decline or fail to develop if our customers do not achieve commercial success in selling their products that incorporate our human interface solutions.

Competitive advances by OEMs in the PC or digital lifestyle product markets that do not utilize our human interface solutions broadly in their product offerings at the expense of our OEM customers could result in lost sales opportunities. Within the digital lifestyle product markets, the mobile smartphone market has become an important factor in our operating results. Any failure to expand our presence in this market, a significant slowdown in the use of our human interface solutions by our customers in this market, the reduced demand for our customers’ products in this market, or a slowdown of growth in this market would adversely affect our revenue.

If we fail to maintain and build relationships with our customers and do not continue to satisfy our customers, we may lose future sales and our revenue may stagnate or decline.

Because our success depends on the widespread market acceptance of our OEM customers’ products, we must continue to maintain our relationships with the leading notebook computer OEMs and expand our relationships with mobile smartphone and feature phone and tablet OEMs. In addition, we must identify areas of significant growth potential in other markets, establish relationships with OEMs in those markets, and assist those OEMs in developing products that use our interface product solutions. Our failure to identify potential growth opportunities, particularly in the mobile smartphone and feature phone market, the tablet market, and the ultrabook portion of the PC market, or establish and maintain relationships with OEMs in those markets, would prevent our business from growing in those markets.

Our ability to meet the expectations of our customers requires us to provide innovative human interface solutions for customers on a timely and cost-effective basis and to maintain customer satisfaction with our human interface solutions. We must match our design and production capacity with customer demand, maintain satisfactory delivery schedules, and meet performance goals. If we are unable to achieve these goals for any reason, our customers could reduce their purchases from us and our sales would decline or fail to develop.

Our customer relationships also can be affected by factors affecting our customers that are unrelated to our performance. These factors can include a myriad of situations, including business reversals of customers, determinations by customers to change their product mix or abandon business segments, or mergers, consolidations, or acquisitions involving our customers.

The loss of revenue from one or more large customers could harm our business, financial condition, and operating results.

In fiscal 2012, one customer, TPK, accounted for 12% of our net revenue. In fiscal 2011, no customer accounted for more than 10% of our net revenue. Additionally, receivables from Compal and Wistron consisted of 14% and 12% of accounts receivable, respectively, at the end of fiscal 2012. Receivables from Compal were 12% of accounts receivable at the end of fiscal 2011. There were no other customers who represented more than 10% of our accounts receivable at the end of fiscal 2012 or 2011.

BYD, Compal, Inventec, LGIT, Pegatron, Quanta, TPK, Wintek, and Wistron are some of the contract manufacturers that serve our OEM customers. Any material delay, cancellation, or reduction of orders from any one or more of these contract manufacturers or the OEMs they serve could harm our business, financial condition, and operating results. The adverse effect would be more substantial if our other customers do not increase their orders or if we are unsuccessful in generating orders for human interface solutions from new customers. Many of these contract manufacturers sell to the same OEMs, and therefore our concentration with certain OEMs may be higher than with any individual contract manufacturer. Concentration in our customer base may make fluctuations in revenue and earnings more severe and make business planning more difficult.

 

20


Table of Contents

We rely on others for our production and any interruptions of these arrangements could disrupt our ability to fill our customers’ orders.

We utilize contract manufacturers for all of our production requirements. The majority of our manufacturing is conducted in China, Taiwan, and Thailand by contract manufacturers that also perform services for numerous other companies. We do not have a guaranteed level of production capacity with any of our contract manufacturers. Qualifying new contract manufacturers, and specifically semiconductor foundries, is time consuming and might result in unforeseen manufacturing and operations problems. The loss of our relationships with our contract manufacturers or assemblers or their inability to conduct their manufacturing and assembly services for us as anticipated in terms of capacity, cost, quality, and timeliness could adversely affect our ability to fill customer orders in accordance with required delivery, quality, and performance requirements. If this were to occur, the resulting decline in revenue would harm our business.

We depend on third parties to maintain satisfactory manufacturing yields and delivery schedules, and their inability to do so could increase our costs, disrupt our supply chain, and result in our inability to deliver our products, which would adversely affect our operating results.

We depend on our contract manufacturers and semiconductor fabricators to maintain high levels of productivity and satisfactory delivery schedules at manufacturing and assembly facilities located primarily in China, Taiwan, and Thailand. We provide our contract manufacturers with six-month rolling forecasts of our production requirements. We do not, however, have long-term agreements with any of our contract manufacturers that guarantee production capacity, prices, lead times, or delivery schedules. Our contract manufacturers serve other customers, a number of which have greater production requirements than we do. As a result, our contract manufacturers could determine to prioritize production capacity for other customers or reduce or eliminate deliveries to us on short notice. At times, we have experienced lower than anticipated manufacturing yields and lengthening of delivery schedules. Lower than expected manufacturing yields could increase our costs or disrupt our supplies. We may encounter lower manufacturing yields and longer delivery schedules in commencing volume production of new products that we introduce. Any of these problems could result in our inability to deliver our product solutions in a timely manner and adversely affect our operating results.

Shortages of components and materials may delay or reduce our sales and increase our costs, thereby harming our operating results.

The inability to obtain sufficient quantities of components and other materials necessary for the production of our products could result in reduced or delayed sales or lost orders. Any delay in or loss of sales could adversely impact our operating results. Many of the materials used in the production of our products are available only from a limited number of foreign suppliers, particularly suppliers located in Asia. In most cases, neither we nor our contract manufacturers have long-term supply contracts with these suppliers. As a result, we are subject to economic instability in these Asian countries as well as to increased costs, supply interruptions, and difficulties in obtaining materials. Our customers also may encounter difficulties or increased costs in obtaining the materials necessary to produce their products into which our product solutions are incorporated.

From time to time, materials and components used in our product solutions or in other aspects of our customers’ products have been subject to allocation because of shortages of these materials and components. Future shortages of materials and components, including potential supply constraints of silicon, could cause delayed shipments, customer dissatisfaction, and lower revenue.

We are subject to lengthy development periods and product acceptance cycles, which can result in development and engineering costs without any future revenue.

We provide human interface solutions that are incorporated by OEMs into the products they sell. OEMs make the determination during their product development programs whether to incorporate our human interface solutions or pursue other alternatives. This process requires us to make significant investments of time and resources in the design of human interface solutions well before our customers introduce their products incorporating these interfaces and before we can be sure that we will generate any significant sales to our customers or even recover our investment. During a customer’s entire product development process, we face the risk that our interfaces will fail to meet our customer’s technical, performance, or cost requirements or that our products will be replaced by competitive products or alternative technological solutions. Even if we complete our design process in a manner satisfactory to our customer, the customer may delay or terminate its product development efforts. The occurrence of any of these events could cause sales to not materialize, to be deferred, or to be cancelled, which would adversely affect our operating results.

 

21


Table of Contents

We do not have long-term purchase commitments from our customers, and their ability to cancel, reduce, or delay orders could reduce our revenue and increase our costs.

Our customers do not provide us with firm, long-term volume purchase commitments, but instead issue purchase orders. As a result, customers can cancel purchase orders or reduce or delay orders at any time. The cancellation, delay, or reduction of customer purchase orders could result in reduced revenue, excess inventory, and unabsorbed overhead. We have an established presence in the notebook computer market and have only recently established a presence in the digital lifestyle product markets. Our success in the digital lifestyle product markets, including those for mobile smartphones and feature phones, the tablet market, and the ultrabook portion of the PC market, require us to establish the value added by our products to OEMs, including those that have traditionally used other solutions. All of the markets we serve are subject to severe competitive pressures, rapid technological change, and product obsolescence, which increase our inventory and overhead risks, resulting in increased costs.

We face intense competition that could result in our losing or failing to gain market share and suffering reduced revenue.

We serve intensely competitive markets that are characterized by price erosion, rapid technological change, and competition from major domestic and international companies. This intense competition could result in pricing pressures, lower sales, reduced margins, and lower market share. Depressed economic conditions, a slowdown in the PC market, the emergence of new products, such as tablet or slate devices and ultrabooks not including our product solutions, rapid changes in the mobile smartphone and feature phone market, and competitive pressures may result in lower demand for our product solutions, pricing pressures, and reduced unit margins.

Any movement away from high-quality, custom designed, feature-rich human interface solutions to lower priced alternatives would adversely affect our business. Some of our competitors, particularly in the markets for digital lifestyle products and other electronic devices, have greater market recognition, larger customer bases, and substantially greater financial, technical, marketing, distribution, and other resources than we possess and that afford them competitive advantages. As a result, they may be able to devote greater resources to the promotion and sale of products, to negotiate lower prices for raw materials and components, to deliver competitive products at lower prices, and to introduce new product solutions and respond to customer requirements more quickly than we can. Our competitive position could suffer if one or more of our customers determine not to utilize our custom engineered, total solutions approach and instead decide to design and manufacture their own interfaces, to contract with our competitors, or to use alternative technologies.

Our ability to compete successfully depends on a number of factors, both within and outside our control. These factors include the following:

 

   

our success in designing and introducing new human interface solutions, including those implementing new technologies;

 

   

our ability to predict the evolving needs of our customers and to assist them in incorporating our technologies into their new products;

 

   

our ability to meet our customers’ requirements for low power consumption, ease of use, reliability, durability, and small form factor;

 

   

our ability to meet our customers’ price and performance requirements;

 

   

the quality of our customer service and support;

 

   

the rate at which customers incorporate our human interface solutions into their own products;

 

   

product or technology introductions by our competitors; and

 

   

foreign currency fluctuations, which may cause a foreign competitor’s products to be priced significantly lower than our product solutions.

 

22


Table of Contents

If we do not keep pace with technological innovations, our products may not be competitive and our revenue and operating results may suffer.

We operate in rapidly changing markets. Technological advances, the introduction of new products, and new design techniques could adversely affect our business unless we are able to adapt to the changing conditions. Technological advances could render our solutions less competitive or obsolete, and we may not be able to respond effectively to the technological requirements of evolving markets. As a result, we will be required to expend substantial funds for and commit significant resources to:

 

   

continue research and development activities on existing and potential human interface solutions,

 

   

hire additional engineering and other technical personnel, and

 

   

purchase advanced design tools and test equipment.

Our business could be harmed if we are unable to develop and utilize new technologies that address the needs of our customers, or our competitors or customers do so more effectively than we do.

Our efforts to develop new technologies may not result in commercial success, which could cause a decline in our revenue and could harm our business.

Our research and development efforts with respect to new technologies may not result in customer or market acceptance. Some or all of those technologies may not successfully make the transition from the research and development stage to cost-effective production as a result of technology problems, competitive cost issues, yield problems, and other factors. Even when we successfully complete a research and development effort with respect to a particular technology, our customers may decide not to introduce or may terminate products utilizing the technology for a variety of reasons, including the following:

 

   

difficulties with other suppliers of components for the products,

 

   

superior technologies developed by our competitors and unfavorable comparisons of our solutions with these technologies,

 

   

price considerations, and

 

   

lack of anticipated or actual market demand for the products.

The nature of our business requires us to make continuing investments for new technologies. Significant expenses relating to one or more new technologies that ultimately prove to be unsuccessful for any reason could have a material adverse effect on us. In addition, any investments or acquisitions made to enhance our technologies may prove to be unsuccessful. If our efforts are unsuccessful, our business could be harmed.

 

23


Table of Contents

We may not be able to enhance our existing product solutions and develop new product solutions in a timely manner.

Our future operating results will depend to a significant extent on our ability to continue to provide new human interface solutions that compare favorably with alternative solutions on the basis of time to introduction, cost, performance, and end user preferences. Our success in maintaining existing and attracting new customers and developing new business depends on various factors, including the following:

 

   

innovative development of new solutions for customer products,

 

   

utilization of advances in technology,

 

   

maintenance of quality standards,

 

   

performance advantages,

 

   

efficient and cost-effective solutions, and

 

   

timely completion of the design and introduction of new human interface solutions.

Our inability to enhance our existing product solutions and develop new product solutions on a timely basis could harm our operating results and impede our growth.

A technologically new human interface solution that achieves significant market share could harm our business.

Our human interface solutions are designed to integrate touch, handwriting, and vision capabilities. New computing and communications devices could be developed that call for a different interface solution. Existing devices also could be modified to allow for a different interface solution. Our business could be harmed if our products become noncompetitive as a result of a technological breakthrough that allows a new interface solution to displace our solutions and achieve significant market acceptance.

International sales and manufacturing risks could adversely affect our operating results.

Our manufacturing and assembly operations are primarily conducted in China, Taiwan, and Thailand by contract manufacturers and semiconductor fabricators. We have sales and logistics operations in Hong Kong, and sales and engineering design support operations in China, Japan, Korea, Switzerland, and Taiwan. These international operations expose us to various economic, political, and other risks that could adversely affect our operations and operating results, including the following:

 

   

difficulties and costs of staffing and managing a multi-national organization,

 

   

unexpected changes in regulatory requirements,

 

   

differing labor regulations,

 

   

potentially adverse tax consequences,

 

   

tariffs and duties and other trade barrier restrictions,

 

   

possible employee turnover or labor unrest,

 

   

greater difficulty in collecting accounts receivable,

 

   

the burdens and costs of compliance with a variety of foreign laws,

 

   

the volatility of currency exchange rates,

 

   

potentially reduced protection for intellectual property rights, and

 

   

political or economic instability in certain parts of the world.

The risks associated with international operations could negatively affect our operating results.

Our business may suffer if international trade is hindered, disrupted, or economically disadvantaged.

Political and economic conditions abroad may adversely affect the foreign production and sale of our products. Protectionist trade legislation in either the United States or foreign countries, such as a change in the current tariff structures, export or import compliance laws, or other trade policies, could adversely affect our ability to sell human interface solutions in foreign markets and to obtain materials or equipment from foreign suppliers.

 

24


Table of Contents

Changes in policies by the U.S. or foreign governments resulting in, among other things, higher taxation, currency conversion limitations, restrictions on the transfer of funds, or the expropriation of private enterprises also could have a material adverse effect on us. Any actions by countries in which we conduct business to reverse policies that encourage foreign investment or foreign trade also could adversely affect our operating results. In addition, U.S. trade policies, such as “most favored nation” status and trade preferences for certain Asian nations, could affect the attractiveness of our services to our U.S. customers and adversely impact our operating results.

Our operating results could be adversely affected by fluctuations in the value of the U.S. dollar against foreign currencies.

We transact business predominantly in U.S. dollars and bill and collect our sales in U.S. dollars. A weakening of the dollar could cause our overseas vendors to require renegotiation of either the prices or currency we pay for their goods and services. In the future, customers may negotiate pricing and make payments in non-U.S. currencies. For fiscal 2012, approximately 9% of our costs were denominated in non-U.S. currencies, including Canadian dollars, Hong Kong dollars, British pounds, Taiwan dollars, Japanese yen, Korean won, Chinese yuan, and Swiss francs.

If our overseas vendors or customers require us to transact business in non-U.S. currencies, fluctuations in foreign currency exchange rates could affect our cost of goods, operating expenses, and operating margins and could result in exchange losses. In addition, currency devaluation can result in a loss to us if we hold deposits of that currency. Hedging foreign currencies can be difficult, especially if the currency is not freely traded. We cannot predict the impact of future exchange rate fluctuations on our operating results. We currently do not hedge any foreign currencies.

A majority of our contract manufacturers and semiconductor fabricators are located in China, Taiwan, and Thailand, and most of our customers are located in Asia, increasing the risk that a natural disaster, labor strike, war, or political unrest in those countries or that region would disrupt our operations.

A majority of our contract manufacturers and semiconductor fabricators are located in China, Taiwan, and Thailand, and most of our customers are located in Asia. Events outside of our control, such as earthquakes, fires, floods, or other natural disasters, or political unrest, war, labor strikes, or work stoppages in these countries, would disrupt their operations, which would impact our business. The risk of earthquakes and tsunamis in the Pacific Rim, including Japan (such as the March 2011 earthquake and tsunamis) and Taiwan is significant because of the proximity to major earthquake fault lines. An earthquake or tsunami could cause significant delays in shipments of our product solutions until we are able to shift our outsourced operations. Further, a variety of political factors, such as political unrest in Thailand or political tension between North Korea and South Korea, could disrupt our operations and our ability to meet our customers’ production schedules. If any of these events occur, we may not be able to obtain alternative capacity. Failure to secure alternative capacity could cause a delay in the shipment of our product solutions, which would cause our revenue to fluctuate or decline.

Variability of customer requirements resulting in cancellations, reductions, or delays may adversely affect our operating results.

We must provide increasingly rapid product turnaround and respond to ever-shorter lead times. A variety of conditions, both specific to individual customers and generally affecting the demand for OEMs’ products, may cause customers to cancel, reduce, or delay orders. Cancellations, reductions, or delays by a significant customer or by a group of customers may adversely affect our revenue and could require us to repurchase inventory from our contract manufacturers, which could adversely affect our costs. On occasion, customers require rapid increases in production, which can strain our resources and reduce our margins. Although we have been able to obtain increased production capacity from our third-party manufacturers, we may be unable to do so at any given time to meet our customers’ demands if their demands exceed anticipated levels.

 

25


Table of Contents

Our operating results may experience significant fluctuations that could result in a decline in the price of our stock.

In addition to the variability resulting from the short-term nature of our customers’ commitments, other factors contribute to significant periodic and seasonal quarterly fluctuations in our operating results. These factors include the following:

 

   

the cyclicality of the markets we serve;

 

   

the timing and size of orders;

 

   

order push-outs or cancellations;

 

   

the volume of orders relative to our ability to deliver;

 

   

product introductions and market acceptance of new products or new generations of products;

 

   

the timing of product transitions;

 

   

evolution in the life cycles of our customers’ products;

 

   

timing of expenses in anticipation of future orders;

 

   

changes in product mix;

 

   

availability of manufacturing and assembly services;

 

   

availability of necessary components and materials;

 

   

changes in cost and availability of labor and components;

 

   

the expanded use of high-cost, third-party components in the products we sell;

 

   

timely delivery of product solutions to customers;

 

   

pricing, performance, and availability of competitive products;

 

   

introduction of new technologies into the markets we serve;

 

   

emergence of new competitors;

 

   

pressures on selling prices;

 

   

the absolute and relative levels of corporate enterprise and consumer notebook purchases;

 

   

our success in serving new markets; and

 

   

changes in economic conditions.

Accordingly, period-to-period comparisons are not an indicator of our future performance. Negative or unanticipated fluctuations in our operating results may result in a decline in the price of our stock.

If we fail to manage our growth effectively, our infrastructure, management, and resources could be strained, our ability to effectively manage our business could be diminished, and our operating results could suffer.

The failure to manage our planned growth effectively could strain our resources, which would impede our ability to increase revenue. We have increased the number of our human interface solutions and plan to expand further the number and diversity of our solutions and their use in the future. Our ability to manage our planned diversification and growth effectively will require us to

 

   

successfully hire, train, retain, and motivate additional employees, including employees outside the United States;

 

   

efficiently plan and expand our facilities to meet increased headcount requirements;

 

   

enhance our global operational, financial, and management infrastructure; and

 

   

expand our development and production capacity.

 

26


Table of Contents

In connection with the expansion and diversification of our product and customer base, we are increasing our personnel and making other expenditures to meet demand for our expanding product offerings, including offerings in the notebook computer and digital lifestyle product markets. Increases in the demand for our products will require further expansion of our traditional notebook computer business as well as an increasing presence in the digital lifestyle product markets, including mobile smartphones and feature phones, the tablet market, and the ultrabook portion of the PC market. To date, our sales of human interface solutions for mobile smartphones and feature phones have varied significantly from quarter to quarter. Risks are further increased because customers do not commit to firm production schedules for more than a short time in advance. Any increase in expenses or investments in infrastructure and facilities in anticipation of future orders that do not materialize would adversely affect our profitability. Our customers also may require rapid increases in design and production services that place an excessive short-term burden on our resources and the resources of our third-party manufacturers. If we cannot manage our growth effectively, our business and operating results could suffer.

We depend on key personnel who would be difficult to replace, and our business will likely be harmed if we lose their services or cannot hire additional qualified personnel.

Our success depends substantially on the efforts and abilities of our senior management and other key personnel. The competition for qualified management and key personnel, especially engineers, is intense. Although we maintain noncompetition and nondisclosure covenants with most of our key personnel and one of our key personnel has a change of control severance agreement, we do not have employment agreements with any of them. The loss of services of one or more of our key employees or the inability to hire, train, and retain key personnel, especially engineers and technical support personnel, and capable sales and customer-support employees outside the United States, could delay the development and sale of our products, disrupt our business, and interfere with our ability to execute our business plan.

In the future, if we are unable to obtain stockholder approval of additional shares for our share-based compensation award programs we could be at a competitive disadvantage in the marketplace for qualified personnel or may be required to increase the cash element of our compensation program.

Our compensation program, which includes cash and share-based compensation award components, has been instrumental in attracting, hiring, motivating, and retaining qualified personnel. As a Northern California-based high-growth technology company, competition for qualified personnel in our industry is extremely intense, particularly for engineering and other technical personnel. Our success depends on our continued ability to attract, hire, motivate, and retain qualified personnel and our share-based compensation award programs provide us with a competitive compensatory tool for this purpose. The continued use of our share-based compensation program is necessary for us to compete for engineering and other technical personnel and professional talent without significantly increasing cash compensation costs. In the future, if we are unable to obtain stockholder approval of additional shares for our share-based compensation award programs we could be at a competitive disadvantage in the marketplace for qualified personnel or may be required to increase the cash element of our compensation program.

Our inability to protect our intellectual property could impair our competitive advantage, reduce our revenue, and increase our costs.

Our success and ability to compete depend in part on our ability to maintain the proprietary aspects of our technologies and products. We rely on a combination of patents, copyrights, trade secrets, trademarks, confidentiality agreements, and other contractual provisions to protect our intellectual property, but these measures may provide only limited protection. We license from third parties certain technology used in and for our products. These third-party licenses are granted with restrictions, and there can be no assurances that such third-party technology will remain available to us on terms beneficial to us. Failure to enforce and protect our intellectual property rights or obtain from third parties the right to use necessary technology could have a material adverse effect on our business, financial condition, and operating results. In addition, the laws of some foreign countries do not protect proprietary rights as fully as do the laws of the United States.

Patents may not issue from the patent applications that we have filed or may file in the future. Our issued patents may be challenged, invalidated, or circumvented, and claims of our patents may not be of sufficient scope or strength, or issued in the proper geographic regions, to provide meaningful protection or any commercial advantage. In addition, certain of our patents will expire within several years.

 

27


Table of Contents

We have not applied for, and do not have, any copyright registration on our technologies or products. We have applied to register certain of our trademarks in the United States and other countries. There can be no assurance that we will obtain registrations of principle or other trademarks in key markets. Failure to obtain registrations could compromise our ability to protect fully our trademarks and brands and could increase the risk of challenge from third parties to our use of our trademarks and brands.

We do not consistently rely on written agreements with our customers, suppliers, manufacturers, and other recipients of our technologies and products, and therefore some trade secret protection may be lost and our ability to enforce our intellectual property rights may be limited. Additionally, our customers, suppliers, manufacturers, and other recipients of our technologies and products may seek to use our technologies and products without appropriate limitations. In the past, we did not consistently require our employees and consultants to enter into confidentiality, employment, or proprietary information and invention assignment agreements. Therefore, our former employees and consultants may try to claim some ownership interest in our technologies and products and may use our technologies and products competitively and without appropriate limitations.

We may be required to incur substantial expenses and divert management attention and resources in defending intellectual property litigation against us.

We may receive notices from third parties that claim our products infringe their rights. From time to time, we receive notice from third parties of the intellectual property rights such parties have obtained. We cannot be certain that our technologies and products do not and will not infringe issued patents or other proprietary rights of others. Any future claims, with or without merit, could result in significant litigation costs and diversion of resources, including the attention of management, and could require us to enter into royalty and licensing agreements, any of which could have a material adverse effect on our business. There can be no assurance that such licenses could be obtained on commercially reasonable terms, if at all, or that the terms of any offered licenses would be acceptable to us. If forced to cease using such technology, there can be no assurance that we would be able to develop or obtain alternate technology. Accordingly, an adverse determination in a judicial or administrative proceeding or failure to obtain necessary licenses could prevent us from manufacturing, using, or selling certain of our products, which could have a material adverse effect on our business, financial condition, and operating results.

Furthermore, parties making such claims could secure a judgment awarding substantial damages, as well as injunctive or other equitable relief that could effectively block our ability to make, use, or sell our products in the United States or abroad. Such a judgment could have a material adverse effect on our business, financial condition, and operating results. In addition, we are obligated under certain agreements to indemnify the other party in connection with infringement by us of the proprietary rights of third parties. In the event we are required to indemnify parties under these agreements, it could have a material adverse effect on our business, financial condition, and operating results.

We may incur substantial expenses and divert management resources in prosecuting others for their unauthorized use of our intellectual property rights.

The markets in which we compete are characterized by frequent litigation regarding patents and other intellectual property rights. Other companies, including our competitors, may develop technologies that are similar or superior to our technologies, duplicate our technologies, or design around our patents and may have or obtain patents or other proprietary rights that would prevent, limit, or interfere with our ability to make, use, or sell our products. Effective intellectual property protection may be unavailable or limited in some foreign countries in which we operate, such as China and Taiwan. Unauthorized parties may attempt to copy or otherwise use aspects of our technologies and products that we regard as proprietary. There can be no assurance that our means of protecting our proprietary rights in the United States or abroad will be adequate or that competitors will not independently develop similar technologies. If our intellectual property protection is insufficient to protect our intellectual property rights, we could face increased competition in the markets for our technologies and products.

Should any of our competitors file patent applications or obtain patents that claim inventions also claimed by us, we may choose to participate in an interference proceeding to determine the right to a patent for these inventions because our business would be harmed if we fail to enforce and protect our intellectual property rights. Even if the outcome is favorable, this proceeding could result in substantial cost to us and disrupt our business.

 

28


Table of Contents

In the future, we also may need to file lawsuits to enforce our intellectual property rights, to protect our trade secrets, or to determine the validity and scope of the proprietary rights of others. This litigation, whether successful or unsuccessful, could result in substantial costs and diversion of resources, which could have a material adverse effect on our business, financial condition, and operating results.

If we become subject to product returns and product liability claims resulting from defects in our products, we may fail to achieve market acceptance of our products and our business could be harmed.

We develop complex products in an evolving marketplace and generally warrant our products for a period of 12 months from the date of sale. Despite testing by us and our customers, defects may be found in existing or new products. Manufacturing errors or product defects could result in a delay in recognition or loss of revenue, loss of market share, or failure to achieve market acceptance. Additionally, defects could result in financial or other damages to our customers; cause us to incur significant warranty, support, and repair costs; and divert the attention of our engineering personnel from key product development efforts. In such circumstances, our customers could also seek and obtain damages from us for their losses. A product liability claim brought against us, even if unsuccessful, would likely be time-consuming and costly to defend. The occurrence of such problems would likely harm our business.

Potential strategic alliances may not achieve their objectives, and the failure to do so could impede our growth.

We anticipate that we will enter into strategic alliances. Among other matters, we continually explore strategic alliances designed to enhance or complement our technology or to work in conjunction with our technology; to provide necessary know-how, components, or supplies; and to develop, introduce, and distribute products utilizing our technology. Any strategic alliances may not achieve their intended objectives, and parties to our strategic alliances may not perform as contemplated. The failure of these alliances may impede our ability to introduce new products and enter new markets.

Any acquisitions that we undertake could be difficult to integrate, disrupt our business, dilute stockholder value, and harm our operating results.

We expect to pursue opportunities to acquire other businesses and technologies in order to complement our current human interface solutions, expand the breadth of our markets, enhance our technical capabilities, or otherwise offer growth opportunities. We cannot accurately predict the timing, size, and success of any future acquisitions. We may be unable to identify suitable acquisition candidates or to complete the acquisitions of candidates that we identify. Increased competition for acquisition candidates or increased asking prices by acquisition candidates may increase purchase prices for acquisitions to levels beyond our financial capability or to levels that would not result in the returns required by our acquisition criteria. Acquisitions also may become more difficult in the future as we or others acquire the most attractive candidates. Unforeseen expenses, difficulties, and delays frequently encountered in connection with rapid expansion through acquisitions could inhibit our growth and negatively impact our operating results. If we make any future acquisitions, we could issue stock that would dilute existing stockholders’ percentage ownership, incur substantial debt, assume contingent liabilities, or experience higher operating expenses.

As a part of any potential acquisition, we may engage in discussions with various companies. In connection with these discussions, we and each potential acquisition candidate exchange confidential operational and financial information, conduct due diligence inquiries, and consider the structure, terms, and conditions of the potential acquisition. In certain cases, the prospective acquisition candidate agrees not to discuss a potential acquisition with any other party for a specific period of time and agrees to take other actions designed to enhance the possibility of the acquisition, such as preparing audited financial information. Potential acquisition discussions frequently take place over a long period of time and involve difficult business integration and other issues. As a result of these and other factors, a number of potential acquisitions that from time to time appear likely to occur do not result in binding legal agreements and are not consummated, but may result in increased legal and consulting costs.

We cannot assure you that we would be successful in overcoming problems encountered in connection with any acquisitions, and our inability to do so could disrupt our operations, result in goodwill or intangible asset impairment charges, and adversely affect our business. Our experience in acquiring other businesses and technologies is limited. We did, however, recently acquire Pacinian Corporation and the Video Display Operation of Integrated Device Technology, Inc.

 

29


Table of Contents

Any acquisitions that we undertake in the future could be difficult to integrate, disrupt our business, and harm our operations.

In order to pursue a successful acquisition strategy, we may need to integrate the operations of acquired businesses into our operations, including centralizing certain functions to achieve cost savings and pursuing programs and processes that leverage our revenue and growth opportunities. The integration of the management, operations, and facilities of acquired businesses with our own could involve difficulties, which could adversely affect our growth rate and operating results. We are in the process of integrating our acquisitions of Pacinian Corporation and the Video Display Operation of Integrated Device Technology, Inc.

We may be unable to complete effectively an integration of the management, operations, facilities, and accounting and information systems of acquired businesses with our own; to manage efficiently the combined operations of the acquired businesses with our operations; to achieve our operating, growth, and performance goals for acquired businesses; to achieve additional revenue as a result of our expanded operations; or to achieve operating efficiencies or otherwise realize cost savings as a result of anticipated acquisition synergies. The integration of acquired businesses involves numerous risks, including the following:

 

   

the potential disruption of our core business;

 

   

the potential strain on our financial and managerial controls and reporting systems and procedures;

 

   

potential unknown liabilities associated with the acquired business;

 

   

unanticipated costs associated with the acquisition;

 

   

diversion of management’s attention from our core business;

 

   

problems assimilating the purchased operations, technologies, or products;

 

   

risks associated with entering markets and businesses in which we have little or no prior experience;

 

   

failure of acquired businesses to achieve expected results;

 

   

adverse effects on existing business relationships with suppliers and customers;

 

   

failure to retain key customers, suppliers, or personnel of acquired businesses;

 

   

the risk of impairment charges related to potential write-downs of acquired assets; and

 

   

creating uniform standards, controls, procedures, policies, and information systems.

The valuation of our technology conducted in connection with our international operating structure may be challenged, which could result in additional taxes, interest, and penalties.

Under our international operating structure, one of our affiliates licensed from us certain rights to the pre-existing and in-process technology associated with our products for exploitation in all geographic markets except the U.S., Japanese, and Korean markets, which we refer to as “ROW markets.” Our affiliate also acquired ownership of all future economic rights to product sales in ROW markets by entering into an agreement to license certain intangibles and a cost-sharing agreement under which we and our affiliate share research and development costs in accordance with certain tax rules and regulations. We believe this structure appropriately reflects where our profits are generated and may result in future tax advantages to us, but there can be no assurances that this will be the case.

In fiscal 2011, we were notified by the Internal Revenue Service, or the Service, that our fiscal 2003 through 2006 and fiscal 2008 through 2010 would be subject to an audit. While we believe our unrecognized tax benefits associated with the years and issues under audit are adequate, we can make no assurances that an assessment, if any, will not exceed our accrued unrecognized tax benefits.

 

30


Table of Contents

Repatriation of our foreign earnings to the United States or changes in tax laws may adversely affect our future reported tax rates and financial results or the way we conduct our business.

Changes in tax laws may adversely affect our future reported tax rates and financial results or the way we conduct our business. We consider the undistributed operating earnings of certain foreign subsidiaries of approximately $334.8 million as of the end of fiscal 2012, to be indefinitely invested outside the United States and have not provided for U.S. federal and state income taxes that may result from future remittances of those undistributed operating earnings. Proposals to reform U.S. tax laws, including proposals that could reduce or eliminate the deferral of U.S. income tax on our foreign subsidiaries’ undistributed earnings, could require those earnings to be taxed at the U.S. federal income tax rate.

Currently our investments in auction rate securities, or ARS investments, are not liquid, and we may lose some or all of our principal invested or may be required to further reduce the carrying value if the issuers are not able to meet their payment obligations or if we sell our ARS investments before they recover.

We ended fiscal 2012 with $27.4 million invested in ARS investments for which the auctions have failed and our investments are not liquid. The carrying value of these investments was $15.3 million, reflecting $14.0 million of other-than-temporary impairment, partially offset by $2.0 million of unrealized recovery. If the issuers are not able to meet their payment obligations or if we sell our ARS investments before they recover, we may lose some or all of the principal invested or may be required to further reduce the carrying value. This would adversely affect our financial position, operating results, and cash flows.

Legislation affecting the markets in which we participate could adversely affect our ability to implement our growth strategies.

Our ability to expand our business may be adversely impacted by future laws or regulations. Our customers’ products may be subject to laws relating to environmental regulations, communications, encryption technology, electronic commerce, e-signatures, governmental control over content, and privacy. Any of these laws could be expensive to comply with, and the marketability of our products could be adversely affected.

We face risks associated with security breaches or cyber attacks.

We face risks associated with security breaches or cyber attacks of our computer systems or those of our third-party representatives, vendors, and service providers. Although we have implemented security procedures and controls to address these threats, our systems may still be vulnerable to data theft, computer viruses, programming errors, attacks by third parties, or similar disruptive problems. If we were to experience a security breach or cyber attack, we could be required to incur substantial costs and liabilities, including the following: expenses to rectify the consequences of the security breach or cyber attack, liability for stolen assets or information, costs of repairing damage to our systems, lost revenue and income resulting from any system downtime caused by such breach or attack, increased costs of cybersecurity protection, costs of incentives we may be required to offer to our customers or business partners to retain their business, and damage to our reputation. In addition, any compromise of security or a cyber attack could deter customers or business partners from entering into transactions that involve providing confidential information to us. Furthermore, if confidential customer information or information belonging to our business partners is misappropriated from our systems, we could be sued by those who assert we did not take adequate precautions to safeguard our systems and confidential data belonging to our customers or business partners, which could subject us to liability and result in significant legal expenses of defending these claims. As a result, any compromise of security of our systems or cyber attack could have a material adverse effect on our business, reputation, financial condition, and operating results.

 

31


Table of Contents

We must finance the growth of our business and the development of new products, which could have an adverse effect on our operating results.

To remain competitive, we must continue to make significant investments in research and development, marketing, and business development. Our failure to increase sufficiently our net revenue to offset these increased costs would adversely affect our operating results.

From time to time, we may seek additional equity or debt financing to provide for funds required to expand our business, including through acquisitions. We cannot predict the timing or amount of any such requirements at this time. If such financing is not available on satisfactory terms, we may be unable to expand our business or to develop new business at the rate desired and our operating results may suffer. Debt financing increases expenses and must be repaid regardless of operating results. Equity financing could result in additional dilution to existing stockholders.

We consider the undistributed operating earnings of certain foreign subsidiaries to be indefinitely invested outside the United States. If we were to distribute a portion of those earnings to our U.S. parent company to finance our future growth, we would be required to pay U.S. federal and state taxes on the distribution and further may be required to accrue U.S. and state taxes on the remaining undistributed operating earnings, which would adversely affect our tax rate and financial results.

Our target markets are cyclical and may result in fluctuations in our operating results.

The PC and electronics industries have experienced significant economic downturns at various times. These downturns are characterized by diminished product demand, accelerated erosion of average selling prices, and production overcapacity. In addition, the PC and electronics industries are cyclical in nature. We seek to reduce our exposure to industry downturns and cyclicality by providing design and production services for leading companies in rapidly expanding industry segments. We may, however, experience substantial period-to-period fluctuations in future operating results because of general industry conditions or events occurring in the general economy.

Continuing uncertainty of the U.S. and global economy may have serious implications for the growth and stability of our business and may negatively affect our stock price.

The revenue growth and profitability of our business depends significantly on the overall demand in the notebook computer market, including ultrabooks, in the markets for digital lifestyle products and other electronic devices, including mobile smartphones and feature phones, and in the tablet market. Softening demand in these markets caused by ongoing economic uncertainty may result in decreased revenue or earnings levels or growth rates. The U.S. and global economy has been historically cyclical, and market conditions continue to be challenging, which has resulted in individuals and companies delaying or reducing expenditures. Further delays or reductions in spending could have a material adverse effect on demand for our products, and consequently on our business, financial condition, operating results, prospects, and stock price.

We expect to incur additional expenses in complying with corporate governance and public disclosure requirements.

Changing laws, regulations, and standards relating to corporate governance and public disclosure, including SEC regulations and Nasdaq Global Select Market rules, create uncertainty and increased expenses for companies such as ours. New or changed laws, regulations, and standards are subject to varying interpretations in many cases due to their lack of specificity and, as a result, their application in practice may evolve over time as new guidance is provided by regulatory and governing bodies, which could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices. We are committed to maintaining high standards of corporate governance and public disclosure. As a result, our efforts to comply with evolving laws, regulations, and standards have resulted in, and are likely to continue to result in, increased general and administrative expenses and a diversion of management time and attention from revenue-generating activities to compliance activities. We expect these efforts to require the continued commitment of significant resources. In addition, it may become more difficult and more expensive for us to obtain director and officer liability insurance. As a result, we may have difficulty attracting and retaining qualified board members, which could harm our business. If our efforts to comply with new or changed laws, regulations, and standards differ from the activities intended by regulatory or governing bodies due to ambiguities related to practice, our reputation may be harmed.

 

32


Table of Contents

The Dodd-Frank Wall Street Reform and Consumer Protection Act requires the SEC to establish new disclosure and reporting requirements for those companies who use “conflict” minerals mined from the Democratic Republic of Congo and adjoining countries in their products, whether or not these products are manufactured by third parties. When these new requirements are implemented, they could adversely affect the sourcing and availability of minerals used in the manufacture of our products. There will also be costs associated with complying with the disclosure requirements, including for due diligence in regard to the sources of any conflict minerals used in our products, in addition to the cost of remediation and other changes to products, processes, or sources of supply as a consequence of such verification activities.

The accounting requirements for income taxes on certain of our share-based awards will subject our future quarterly and annual effective tax rates to greater volatility and, consequently, our ability to estimate reasonably our future quarterly and annual effective tax rates is greatly diminished.

We recognize tax benefit upon expensing nonqualified stock options and deferred stock units, or DSUs, issued under our share-based compensation plans. However, under current accounting standards, we cannot recognize tax benefit concurrent with expensing incentive stock options and employee stock purchase plan shares (qualified stock options) issued under our share-based compensation plans. For qualified stock options that vested after our adoption of the applicable accounting standards, we recognize the tax benefit only in the period when disqualifying dispositions of the underlying stock occur and, for qualified stock options that vested prior to our adoption of the applicable accounting standards, the tax benefit is recorded directly to additional paid-in capital. Accordingly, because we cannot recognize the tax benefit for share-based compensation expense associated with qualified stock options until the occurrence of future disqualifying dispositions of the underlying stock and such disqualified dispositions may happen in periods when our stock price substantially increases, and because a portion of that tax benefit may be directly recorded to additional paid-in capital, our future quarterly and annual effective tax rates will be subject to greater volatility and, consequently, our ability to estimate reasonably our future quarterly and annual effective tax rates is greatly diminished.

Future changes in financial accounting standards or practices may cause adverse unexpected fluctuations and affect our reported operating results.

A change in accounting standards or practices could have a significant effect on our reported operating results. New accounting pronouncements and varying interpretations of accounting pronouncements have occurred in the past and may occur in the future. Changes to existing rules or the questioning of current practices may adversely affect our reported financial results or the way we conduct our business.

Further, the U.S.-based Financial Accounting Standards Board, or FASB, is currently working together with the International Accounting Standards Board, or IASB, on several projects to further align accounting principles and facilitate more comparable financial reporting between companies who are required to follow U.S. Generally Accepted Accounting Principles, or GAAP, under SEC regulations and those who are required to follow International Financial Reporting Standards, or IFRS, outside of the United States. These efforts by the FASB and IASB may result in different accounting principles under GAAP that may result in materially different financial results for us in areas including, but not limited to, principles for recognizing revenue and lease accounting.

It is not clear if or when these potential changes in accounting principles may become effective, whether we have the proper systems and controls in place to accommodate such changes, and the impact that any such changes may have on our consolidated financial position, operating results, and cash flows. In addition, as we evolve and change our business and sales models, we are currently unable to take into account how these potential changes may impact our new models, particularly in the area of revenue recognition.

Our charter documents and Delaware law could make it more difficult for a third party to acquire us, and discourage a takeover.

Our certificate of incorporation and the Delaware General Corporation Law contain provisions that may have the effect of making more difficult or delaying attempts by others to obtain control of our company, even when these attempts may be in the best interests of our stockholders. Our certificate of incorporation also authorizes our Board of Directors, without stockholder approval, to issue one or more series of preferred stock, which could have voting and conversion rights that adversely affect or dilute the voting power of the holders of common stock. Delaware law also imposes conditions on certain business combination transactions with “interested stockholders.” Our certificate of incorporation divides our Board of Directors into three classes, with one class to stand for election each year for a three-year term after the election. The classification of directors tends to discourage a third party from initiating a proxy solicitation or otherwise attempting to obtain control of our company and may maintain the incumbency of our Board of Directors, as this structure generally increases the difficulty of, or may delay, replacing a majority of directors. Our certificate of incorporation authorizes our Board of Directors to fill vacancies or newly created directorships. A majority of the directors then in office may elect a successor to fill any vacancies or newly created directorships.

 

33


Table of Contents

Sales of large numbers of shares could adversely affect the price of our common stock.

As of the date of this Annual Report on Form 10-K, all of the outstanding shares of our common stock were eligible for resale in the public markets. Of these shares, approximately one-third were held by affiliates and were eligible for resale in the public markets subject to compliance with the volume and manner of sale rules of Rules 144 or 701 under the Securities Act of 1933, as amended, or the Securities Act, and the balance of the shares were eligible for resale in the public markets as unrestricted shares. In general, under Rule 144 as currently in effect, any person (or persons whose shares are aggregated for purposes of Rule 144) who is deemed an affiliate of our company and beneficially owns restricted securities with respect to which at least six months has elapsed since the later of the date the shares were acquired from us, or from an affiliate of ours, is entitled to sell within any three-month period a number of shares that does not exceed the greater of 1% of the then outstanding shares of our common stock or the average weekly trading volume in common stock during the four calendar weeks preceding such sale. Sales by affiliates under Rule 144 also are subject to certain manner-of-sale provisions and notice requirements and to the availability of current public information about us.

Rule 701, as currently in effect, permits our employees, officers, directors, and consultants who purchase shares pursuant to a written compensatory plan or contract to resell these shares in reliance upon Rule 144, but without compliance with specific restrictions. Rule 701 provides that affiliates may sell their Rule 701 shares under Rule 144 without complying with the holding period requirement and non-affiliates may sell their shares in reliance on Rule 144 without complying with the holding period, public information, volume limitation, or notice provisions of Rule 144. A person who is not an affiliate, who has not been an affiliate within three months prior to sale, and who beneficially owns restricted securities with respect to which at least one year has elapsed since the later of the date the shares were acquired from us, or from an affiliate of ours, is entitled to sell such shares under Rule 144 without regard to any of the volume limitations or other requirements described above. Sales of substantial amounts of common stock in the public market could adversely affect prevailing market prices.

We have registered an aggregate of $100.0 million of common stock and preferred stock for issuance in connection with acquisitions, which shares generally will be freely tradeable after their issuance under Rule 145 of the Securities Act, unless held by an affiliate of the acquired company, in which case such shares will be subject to the volume and manner of sale restrictions of Rule 144 discussed above. The issuance or subsequent sale of these shares in the public market could adversely affect prevailing market prices.

We have registered for offer and sale the shares of common stock that are reserved for issuance pursuant to our outstanding share-based compensation plans. Shares issued in connection with our share-based compensation plans generally will be eligible for sale in the public market, except that affiliates will continue to be subject to volume limitations and other requirements of Rule 144. The issuance or subsequent sale of such shares could depress the market price of our common stock.

The market price of our common stock has been and may continue to be volatile.

The trading price of our common stock has been and may continue to be subject to wide fluctuations in response to various factors, including the following:

 

   

variations in our quarterly results;

 

   

the financial guidance we may provide to the public, any changes in such guidance, or our failure to meet such guidance;

 

   

changes in financial estimates by industry or securities analysts or our failure to meet such estimates;

 

   

various market factors or perceived market factors, including rumors, whether or not correct, involving us, our customers, our suppliers, or our competitors;

 

   

announcements of technological innovations by us or by our competitors;

 

   

introductions of new products or new pricing policies by us or by our competitors;

 

34


Table of Contents
   

acquisitions or strategic alliances by us or by our competitors;

 

   

recruitment or departure of key personnel;

 

   

the gain or loss of significant orders;

 

   

the gain or loss of significant customers;

 

   

market conditions in our industry, the industries of our customers, and the economy as a whole;

 

   

short positions held by investors; and

 

   

general financial market conditions or occurrences.

In addition, stocks of technology companies have experienced extreme price and volume fluctuations that often have been unrelated or disproportionate to these companies’ operating performance. Public announcements by technology companies concerning, among other things, their performance, accounting practices, or legal problems could cause the market price of our common stock to decline regardless of our actual operating performance.

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

Not applicable.

 

ITEM 2. PROPERTIES

Our principal executive offices as well as our principal research, development, sales, marketing, and administrative functions are currently located in our 70,000 square foot facility in Santa Clara, California and an adjacent 64,000 square foot facility. In July 2012, we purchased three office buildings containing approximately 151,000 square feet of space located in San Jose, California. During fiscal 2013, we plan to consolidate our Santa Clara workforce at this location, which will become our new principal executive offices as well as the site of our principal research, development, sales, marketing, and administrative functions. We plan to sell our existing principal executive office property in Santa Clara during fiscal 2013. We lease approximately 34,000 square feet in New York used for research and development; approximately 7,000 square feet in Texas for sales and research and development; and approximately 4,000 square feet in Idaho for research and development. Our Asia/Pacific headquarters are located in Hong Kong where we lease approximately 20,000 square feet of space. We also maintain approximately 22,000 square feet of office space in Taiwan, approximately 20,000 square feet of office space in China, approximately 6,000 square feet of office space in Japan, approximately 10,000 square feet of office space in Korea, and approximately 1,100 square feet of office space in Switzerland. We have satellite sales support offices in Finland and Texas.

 

ITEM 3. LEGAL PROCEEDINGS

None.

 

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

 

35


Table of Contents

PART II

 

ITEM 5. MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information on Common Stock

Our common stock has been listed on the Nasdaq Global Select Market (formerly on the Nasdaq National Market) under the symbol “SYNA” since January 29, 2002. Prior to that time, there was no public market for our common stock. The following table sets forth for the periods indicated the high and low sales prices of our common stock as quoted on the Nasdaq Global Select Market.

 

     High      Low  

Fiscal 2012:

     

First quarter

   $ 26.21       $ 21.97   

Second quarter

   $ 36.94       $ 22.65   

Third quarter

   $ 39.89       $ 30.00   

Fourth quarter

   $ 36.73       $ 24.78   

Fiscal 2011:

     

First quarter

   $ 33.33       $ 24.97   

Second quarter

   $ 30.96       $ 23.82   

Third quarter

   $ 32.24       $ 26.52   

Fourth quarter

   $ 30.30       $ 24.92   

Stockholders

As of August 13, 2012, there were approximately 150 holders of record of our common stock.

Dividends

We have never declared or paid cash dividends on our common stock. We currently plan to retain any earnings to finance the growth of our business, or purchase shares under our common stock purchase program rather than to pay cash dividends. Payments of any cash dividends in the future will depend on our financial condition, operating results, and capital requirements as well as other factors deemed relevant by our board of directors.

Our revolving line of credit also places restrictions on the payment of any dividends.

 

36


Table of Contents

Issuer Purchases of Equity Securities

From April 2005 through June 2012, our Board of Directors has cumulatively authorized $520.0 million for our common stock repurchase program, which expires in October 2013. The remaining amount authorized for the repurchase of our common stock is $106.1 million. Repurchases under the stock repurchase program during the three-month period ended June 30, 2012 were as follows:

 

Period

   Total
Number
of Shares
Purchased
     Average
Price
Paid per
Share
     Total
Number of
Shares
Purchased
as Part of
Publicly
Announced
Program
     Maximum
Dollar Value
of Shares
that May Yet Be
Purchased Under
the Program
 

April 1, 2012 — April 28, 2012

     —         $ —           —         $ 134,333,000   

April 29, 2012 — May 26, 2012

     966,293         27.54         966,293         107,720,000   

May 27, 2012 — June 30, 2012

     60,000         26.76         60,000         106,114,000   
  

 

 

          

Total

     1,026,293         27.50         
  

 

 

          

 

37


Table of Contents

Performance Graph

The following line graph compares cumulative total stockholder returns for the five years ended June 30, 2012 for (i) our common stock, (ii) the Nasdaq Composite Index, and (iii) the Nasdaq Computer Index. The graph assumes an investment of $100 on June 30, 2007. The calculations of cumulative stockholder return on the Nasdaq Composite Index and the Nasdaq Computer Index include reinvestment of dividends. The calculation of cumulative stockholder return on our common stock does not include reinvestment of dividends because we did not pay any dividends during the measurement period. The historical performance shown is not necessarily indicative of future performance.

 

LOGO

The performance graph above shall not be deemed “filed” for purposes of Section 18 of the Exchange Act, or otherwise subject to the liability of that section. The performance graph above will not be deemed incorporated by reference into any filing of our company under the Exchange Act or the Securities Act.

 

38


Table of Contents
ITEM 6. SELECTED FINANCIAL DATA

The following presents selected financial data for each fiscal year in the five-year period ended June 30, 2012. Our fiscal year is the 52- or 53-week period ending on the last Saturday in June. Fiscal 2012 was a 53-week period and the other fiscal years presented were 52-week periods. Our past results of operations are not necessarily indicative of our future results of operations. You should read the selected financial data below in conjunction with Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and our consolidated financial statements and related notes contained elsewhere in this report.

 

     2012      2011      2010     2009     2008  
     (in thousands, except per share amounts)  

Consolidated Statements of Income Data:

            

Net revenue

   $ 548,228         598,538       $ 514,890      $ 473,302      $ 361,057   

Cost of revenue

     292,661         352,468         306,188        281,793        213,606   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Gross margin

     255,567         246,070         208,702        191,509        147,451   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Operating expenses:

            

Research and development

     117,954         105,003         86,552        68,026        50,093   

Selling, general, and administrative

     70,045         68,549         60,027        54,014        48,126   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Total operating expenses

     187,999         173,552         146,579        122,040        98,219   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Operating income

     67,568         72,518         62,123        69,469        49,232   

Interest income/(expense), net

     905         894         (1,423     (3,831     (110

Other charges or expenses

     77         59         (443     (10,296     (8,274
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Income before provision for income taxes

     68,550         73,471         60,257        55,342        40,848   

Provision for income taxes

     14,406         9,675         7,292        7,263        14,485   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Net income

   $ 54,144       $ 63,796       $ 52,965      $ 48,079      $ 26,363   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Net income per share:

            

Basic(1)

   $ 1.64       $ 1.87       $ 1.57      $ 1.41      $ 0.70   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Diluted(1)

   $ 1.57       $ 1.80       $ 1.50      $ 1.35      $ 0.67   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Shares used in computing net income per share:

            

Basic(1)

     33,030         34,042         33,836        33,981        37,667   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Diluted(1)

     34,435         35,454         35,423        35,577        39,365   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Consolidated Balance Sheets Data:

            

Cash, cash equivalents, and short-term investments

   $ 305,005       $ 247,153       $ 209,858      $ 191,970      $ 146,516   

Working capital

     340,579         281,423         228,534        159,693        189,851   

Total assets

     541,505         456,201         414,679        376,150        305,249   

Current debt

     —           —           —          63,234        —     

Long-term debt

     2,305         2,305         2,305        —          112,089   

Treasury shares, at cost

     413,885         352,142         281,932        237,387        237,387   

Total stockholders’ equity

     396,790         339,993         286,511        222,606        121,214   

 

 

(1) All share and per share amounts reflect the 3-for-2 stock split effected as a stock dividend and paid on August 29, 2008.

Our basic net income per share amounts for each period presented have been computed using the weighted average number of shares of common stock outstanding. Our diluted net income per share amounts for each period presented include the weighted average effect of potentially dilutive shares. We used the “treasury stock” method to determine the dilutive effect of our stock options, DSUs, and convertible notes.

 

39


Table of Contents
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward-Looking Statements and Factors That May Affect Results

You should read the following discussion and analysis in conjunction with our financial statements and related notes contained elsewhere in this report. This discussion contains forward-looking statements that involve risks, uncertainties, and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of a variety of factors, including those set forth under Item 1A. Risk Factors.

Overview

We are a leading worldwide developer and supplier of custom-designed human interface solutions that enable people to interact more easily and intuitively with a wide variety of mobile computing, communications, entertainment, and other electronic devices. We believe our results to date reflect the combination of our customer focus, the strength of our intellectual property, and our engineering know-how, which allow us to develop or engineer products that meet the demanding design specifications of OEMs.

We recognize revenue from product sales when there is persuasive evidence that an arrangement exists, delivery has occurred or title has transferred, the price is fixed or determinable, and collection is reasonably assured. Our net revenue increased from $361.1 million for fiscal 2008 to $548.2 million for fiscal 2012, representing a compound annual growth rate of approximately 11%. For fiscal 2008, we derived 76% of our net revenue from the personal computer market and 24% of our net revenue from the digital lifestyle product markets. For fiscal 2012, revenue from the personal computer market accounted for 51% of our net revenue and revenue from the digital lifestyle product markets accounted for 49% of our net revenue.

Many of our customers have migrated their manufacturing operations from Taiwan to China, and many of our OEM customers have established design centers in that region. With our expanded global presence, including offices in China, Finland, Hong Kong, Japan, Korea, Switzerland, Taiwan, and the United States, we are well positioned to provide local sales, operational, and engineering support services to our existing customers, as well as potential new customers, on a global basis.

Our manufacturing operations are based on a variable cost model in which we outsource all of our production requirements and generally drop ship our products directly to our customers from our contract manufacturers’ facilities, eliminating the need for significant capital expenditures and allowing us to minimize our investment in inventories. This approach requires us to work closely with our contract manufacturers and semiconductor fabricators to ensure adequate production capacity to meet our forecasted volume requirements. We provide our contract manufacturers with six-month rolling forecasts and issue purchase orders based on our anticipated requirements for the next 90 days. However, we do not have any long-term supply contracts with any of our contract manufacturers. We use two third-party wafer manufacturers to supply wafers and one third-party packaging manufacturer to package our proprietary ASICs. In certain cases, we rely on a single source or a limited number of suppliers to provide other key components of our products. Our cost of revenue includes all costs associated with the production of our products, including materials, logistics, manufacturing, assembly, and test costs paid to third-party manufacturers and related overhead costs associated with our indirect manufacturing operations personnel. Additionally, we charge all warranty costs, yield losses, and any inventory provisions or write-downs to cost of revenue.

Our gross margin generally reflects the combination of the added value we bring to our OEM customers’ products in meeting their custom design requirements and the impact of our ongoing cost-improvement programs. These cost-improvement programs include reducing materials and component costs and implementing design and process improvements. Our newly introduced products may have lower margins than our more mature products, which have realized greater benefits associated with our ongoing cost-improvement programs. As a result, new product introductions may initially negatively impact our gross margin.

Our research and development expenses include costs for supplies and materials related to product development, as well as the engineering costs incurred to design human interface solutions for OEM customers prior to and after their commitment to incorporate those solutions into their products. These expenses have generally increased, reflecting our continuing commitment to the technological and design innovation required to maintain our position in our existing markets and to adapt our existing technologies or develop new technologies for new markets.

 

40


Table of Contents

Selling, general, and administrative expenses include expenses related to sales, marketing, and administrative personnel; internal sales and outside sales representatives’ commissions; market and usability research; outside legal, accounting, and consulting costs; and other marketing and sales activities. These expenses have generally increased, primarily reflecting incremental staffing and related support costs associated with our increased business levels, growth in our existing markets, and penetration into new markets.

Critical Accounting Policies and Estimates

The preparation of consolidated financial statements in conformity with GAAP requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue, expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to revenue recognition, allowance for doubtful accounts, cost of revenue, inventories, product warranty, share-based compensation costs, provision for income taxes, deferred income tax asset valuation allowances, uncertain tax positions, tax contingencies, goodwill, intangible assets, investments, and contingencies. We base our estimates on historical experience, applicable laws and regulations, and various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

The methods, estimates, interpretations, and judgments we use in applying our most critical accounting policies can have a significant impact on the results that we report in our consolidated financial statements. The SEC considers an entity’s most critical accounting policies to be those policies that are both most important to the portrayal of the entity’s financial condition and results of operations and those that require the entity’s most difficult, subjective, or complex judgments, often as a result of the need to make assumptions and estimates about matters that are inherently uncertain. We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements.

Revenue Recognition

We recognize revenue from product sales when there is persuasive evidence that an arrangement exists, delivery has occurred or title has transferred, the price is fixed or determinable, and collection is reasonably assured, which is generally upon shipment. We accrue for estimated sales returns and other allowances, based on historical experience, at the time we recognize revenue.

Investments

Accounting standards require us to record available-for-sale securities at fair value, with unrealized gains and losses being reported as a component of other comprehensive income. We follow the accounting standards to assess whether our investments with loss positions are other-than-temporarily impaired. We follow the hierarchal approach established under the accounting standards to determine fair value of our investments.

The accounting standards define fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Our fair value estimates consider, among other factors, the collateral underlying the security investments, creditworthiness of the counterparty, timing of expected future cash flows, and, in the case of ARS investments, the probability of a successful auction in a future period. We follow the guidance provided to estimate fair value when the volume and level of activity for an asset or liability have significantly decreased in relation to normal market activity for the asset or liability, and to determine circumstances that may indicate that a transaction is not orderly.

Further, we use judgment in evaluating whether a decline in fair value is temporary or other-than-temporary and consider the following indicators: changes in credit ratings or asset quality; changes in the economic environment; length of time and extent to which fair value has been below cost basis; changes in market conditions; and changes in expected cash flows. We do not intend to sell the investments and it is more likely than not that we will not be required to sell the investments before recovery of their amortized cost basis. Temporary declines in fair value are recorded as charges to accumulated other comprehensive income in the equity section of our balance sheet, while other-than-temporary declines in fair value are bifurcated between credit losses, which are charged to earnings, and noncredit losses, which depending on facts and circumstances may be charged to other comprehensive income or earnings.

 

41


Table of Contents

Inventory

We state our inventories at the lower of cost or market. We base our assessment of the ultimate realization of inventories on our projections of future demand and market conditions. Sudden declines in demand, rapid product improvements, or technological changes, or any combination of these factors can cause us to have excess or obsolete inventories. On an ongoing basis, we review for estimated obsolete or unmarketable inventories and write down our inventories to their net realizable value based upon our forecasts of future demand and market conditions. If actual market conditions are less favorable than our forecasts, additional inventory write-downs may be required. The following factors influence our estimates: changes to or cancellations of customer orders, unexpected decline in demand, rapid product improvements and technological advances, and termination or changes by our OEM customers of any product offerings incorporating our product solutions.

Periodically, we purchase inventory from our contract manufacturers when a customer delays its delivery schedule or cancels its order. In those circumstances in which our customer has cancelled its order and we purchase inventory from our contract manufacturers, we consider a write-down to reduce the carrying value of the inventory purchased to its net realizable value. We charge write-downs to reduce the carrying value of obsolete, slow moving, and non-usable inventory to net realizable value to cost of revenue. The effect of these write-downs is to establish a new cost basis in the related inventory, which we do not subsequently write up. We also record a liability and charge to cost of revenue for estimated losses on inventory we are obligated to purchase from our contract manufacturers when such losses become probable from customer delays or order cancellations.

Business Combinations

We have applied significant estimates and judgments in order to determine the fair value of the identified assets acquired, liabilities assumed, goodwill recognized, and contingent consideration recorded in connection with our business combinations to ensure the value of the assets and liabilities acquired are recognized at fair value as of the acquisition date. In measuring the fair value, we utilize valuation techniques consistent with the market approach, income approach, or cost approach.

The valuation of the identifiable assets and liabilities includes assumptions made in performing the valuation, such as projected revenue, weighted average cost of capital, discount rates, estimated useful lives, estimated probabilities of achieving contingent payment milestones, and other relevant assessments. These assessments can be significantly affected by our estimates, judgments, and assumptions.

We do not believe that there is a reasonable likelihood that there will be material changes to our estimates, judgments, or assumptions. However, if actual results are not consistent with our estimates, judgments, or assumptions, or if additional or new information arises in the future that affects our fair value estimates, then adjustments to our initial fair value estimates may have a material impact to our purchase accounting or our results of operations.

Share-Based Compensation Costs

We account for employee share-based compensation costs in accordance with relevant accounting standards. We utilize the Black-Scholes option pricing model to estimate the grant date fair value of certain employee share-based compensatory awards, which requires the input of highly subjective assumptions, including expected volatility and expected life. Historical and implied volatilities were used in estimating the fair value of our share-based awards. The expected life for our options was previously estimated based on historical trends since our initial public offering. In fiscal 2011, we began to grant options with a contractual life of seven years rather than ten years and now use the simplified method of establishing the expected life as we did not have any history of options with seven-year lives. Changes in these inputs and assumptions can materially affect the measure of estimated fair value of our share-based compensation. Estimated forfeitures for share-based awards that are not expected to vest are estimated based on historical trends since our initial public offering. We charge the estimated fair value less estimated forfeitures to earnings on a straight-line basis over the vesting period of the underlying awards, which is generally four years for our stock options and DSUs and up to two years for our employee stock purchase plan.

The Black-Scholes option pricing model was developed for use in estimating the fair value of traded options that have no vesting restrictions and are fully transferable. As our stock option and our employee stock purchase plan awards have characteristics that differ significantly from traded options, and as changes in the subjective assumptions can materially affect the estimated value, our estimate of fair value may not accurately represent the value assigned by a third party in an arms-length transaction. There currently is no market-based mechanism to verify the reliability and accuracy of the estimates derived from the Black-Scholes option pricing model or other allowable valuation models, nor is there a means to compare and adjust the estimates to actual values. While our estimate of fair value and the associated charge to earnings materially affects our results of operations, it has no impact on our cash position.

 

42


Table of Contents

There are significant variations among allowable valuation models, and there is a possibility that we may adopt a different valuation model or refine the inputs and assumptions under our current valuation model in the future, resulting in a lack of consistency in future periods. Our current or future valuation model and the inputs and assumptions we make may also lack comparability to other companies that use different models, inputs, or assumptions, and the resulting differences in comparability could be material.

Income Taxes

We recognize federal, foreign, and state current tax liabilities or assets based on our estimate of taxes payable or refundable in the then current fiscal year for each tax jurisdiction. We also recognize federal, foreign, and state deferred tax liabilities or assets for our estimate of future tax effects attributable to temporary differences and carryforwards and record a valuation allowance to reduce any deferred tax assets by the amount of any tax benefits that, based on available evidence and our judgment, are not expected to be realized. If our assumptions, and consequently our estimates, change in the future, the valuation allowance we have established for our deferred tax assets may be changed, which could impact income tax expense.

We use a two-step approach to recognizing and measuring uncertain tax positions. The first step is to determine whether it is more-likely-than-not that a tax position will be sustained upon examination, including resolution of any related appeals or litigation processes. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement with a taxing authority. The calculation of tax liabilities involves significant judgment in estimating the impact of uncertainties in the application of highly complex tax laws. Resolution of these uncertainties in a manner inconsistent with our expectations could have a material impact on our consolidated financial position, result of operations, or cash flows. We believe we have adequately provided for reasonably foreseeable outcomes in connection with the resolution of income tax uncertainties. However, our results have in the past, and could in the future, include favorable and unfavorable adjustments to our estimated tax liabilities in the period a determination of such estimated tax liability is made or resolved, upon the filing of an amended return, upon a change in facts, circumstances, or interpretation, or upon the expiration of a statute of limitation. Accordingly, our effective tax rate could fluctuate materially from period to period.

We consider the operating earnings of our foreign subsidiaries to be indefinitely invested outside the United States. Accordingly, no provision has been made for the U.S. federal, state, or foreign taxes that may result from future remittances of undistributed earnings of our foreign subsidiaries.

We recognize tax benefit upon expensing certain share-based awards associated with our share-based compensation plans, including nonqualified stock options and DSUs, but we cannot recognize tax benefit concurrent with the recognition of share-based compensation expenses associated with qualified stock options (incentive stock options and employee stock purchase plan shares). For qualified stock options that vested after we began to expense share-based compensation, we recognize tax benefit only in the period when disqualifying dispositions of the underlying stock occur, which historically has been up to several years after vesting and in a period when our stock price substantially increases. For qualified stock options that vested prior to when we began to expense share-based compensation, we record the tax benefit directly to additional paid-in capital. As a result, our future quarterly and annual effective tax rates will be subject to greater volatility and, consequently, our ability to estimate reasonably our future quarterly and annual effective tax rates is greatly diminished.

 

43


Table of Contents

Results of Operations

The following sets forth certain of our consolidated statements of income data for fiscal 2012, 2011, and 2010, along with comparative information regarding the absolute and percentage changes in these amounts (in thousands, except percentages):

 

     2012     2011     $ Change     % Change     2011     2010     $ Change     % Change  

PC applications

   $ 278,122      $ 289,372      $ (11,250     (3.9 %)    $ 289,372      $ 305,737      $ (16,365     (5.4 %) 

Digital lifestyle product applications

     270,106        309,166        (39,060     (12.6 %)      309,166        209,153        100,013        47.8
  

 

 

   

 

 

   

 

 

     

 

 

   

 

 

   

 

 

   

Net revenue

     548,228        598,538        (50,310     (8.4 %)      598,538        514,890        83,648        16.2
  

 

 

   

 

 

   

 

 

     

 

 

   

 

 

   

 

 

   

Gross margin

     255,567        246,070        9,497        3.9     246,070        208,702        37,368        17.9
  

 

 

   

 

 

   

 

 

     

 

 

   

 

 

   

 

 

   

Operating expenses:

                

Research and development

     117,954        105,003        12,951        12.3     105,003        86,552        18,451        21.3

Selling, general, and administrative

     70,045        68,549        1,496        2.2     68,549        60,027        8,522        14.2
  

 

 

   

 

 

   

 

 

     

 

 

   

 

 

   

 

 

   

Operating income

     67,568        72,518        (4,950     (6.8 %)      72,518        62,123        10,395        16.7

Interest income

     922        911        11        1.2     911        977        (66     (6.8 %) 

Interest expense

     (17     (17     —          0.0     (17     (2,400     2,383        (99.3 %) 

Impairment (loss)/recovery on investments, net

     77        59        18        30.5     59        (443     502        (113.3 %) 
  

 

 

   

 

 

   

 

 

     

 

 

   

 

 

   

 

 

   

Income before provision for income taxes

     68,550        73,471        (4,921     (6.7 %)      73,471        60,257        13,214        21.9

Provision for income taxes

     14,406        9,675        4,731        48.9     9,675        7,292        2,383        32.7
  

 

 

   

 

 

   

 

 

     

 

 

   

 

 

   

 

 

   

Net income

   $ 54,144      $ 63,796      $ (9,652     (15.1 %)    $ 63,796      $ 52,965      $ 10,831        20.4
  

 

 

   

 

 

   

 

 

     

 

 

   

 

 

   

 

 

   

The following sets forth certain of our consolidated statements of income data as a percentage of net revenues for fiscal 2012, 2011, and 2010:

 

     2012     2011     Percentage
Point
Increase
(Decrease)
    2011     2010     Percentage
Point
Increase
(Decrease)
 

PC applications

     50.7     48.3     2.4     48.3     59.4     (11.1 %) 

Digital lifestyle product applications

     49.3     51.7     (2.4 %)      51.7     40.6     11.1
  

 

 

   

 

 

     

 

 

   

 

 

   

Net revenue

     100.0     100.0       100.0     100.0  
  

 

 

   

 

 

     

 

 

   

 

 

   

Gross margin

     46.6     41.1     5.5     41.1     40.5     0.6
  

 

 

   

 

 

     

 

 

   

 

 

   

Operating expenses:

            

Research and development

     21.5     17.5     4.0     17.5     16.8     0.7

Selling, general, and administrative

     12.8     11.5     1.3     11.5     11.7     (0.2 %) 
  

 

 

   

 

 

     

 

 

   

 

 

   

Operating income

     12.3     12.1     0.2     12.1     12.1     0.0

Income before provision for income taxes

     12.5     12.3     0.2     12.3     11.7     0.6

Provision for income taxes

     2.6     1.6     1.0     1.6     1.4     0.2
  

 

 

   

 

 

     

 

 

   

 

 

   

Net income

     9.9     10.7     (0.8 %)      10.7     10.3     0.4
  

 

 

   

 

 

     

 

 

   

 

 

   

Fiscal 2012 Compared with Fiscal 2011

Net Revenue.

Net revenue was $548.2 million for fiscal 2012 compared with $598.5 million for fiscal 2011, a decrease of $50.3 million, or 8.4%. Of our fiscal 2012 net revenue, $278.1 million, or 50.7%, of net revenue was from the personal computing market and $270.1 million, or 49.3%, of net revenue was from the digital lifestyle product markets, including $260.8 million from mobile smartphones and feature phones. The overall decrease in net revenue for fiscal 2012 was attributable to a $39.1 million, or 12.6%, decrease in net revenue from digital lifestyle product applications and a decrease of $11.3 million, or 3.9%, in net revenue from PC applications. Specific reasons for the decrease in net revenue were primarily attributable to a lower priced product mix in the digital lifestyle product markets and lower revenue from PC peripherals. Net revenue from digital lifestyle products, which primarily consists of mobile products, was down due to a shift in revenue from higher priced full sensor module solutions to lower priced chip or tail solutions, partially offset by an increase in mobile product unit shipments.

 

44


Table of Contents

Based on industry estimates of unit shipments, the notebook market is anticipated to increase approximately 8% and the mobile smartphone market is anticipated to increase approximately 36% from calendar 2011 to 2012.

Gross Margin.

Gross margin as a percentage of net revenue was 46.6%, or $255.6 million, for fiscal 2012 compared with 41.1%, or $246.1 million, for fiscal 2011. The 550 basis point improvement in gross margin was primarily attributable to a shift in mobile product revenue from lower margin full sensor module solutions to higher margin chip or tail solutions.

We continuously introduce new product solutions, many of which have life cycles of less than a year. Further, as we sell our capacitive sensing technology in designs that are generally unique or specific to an OEM customer’s application, gross margin varies on a product-by-product basis, making our cumulative gross margin a blend of our product specific designs and independent of the vertical markets that our products serve. As a virtual manufacturer, our gross margin percentage is generally not impacted materially by our shipment volume. We charge write-downs to reduce the carrying value of obsolete, slow moving, and non-usable inventory to net realizable value, including warranty costs, to cost of revenue.

Operating Expenses.

Research and Development Expenses. Research and development expenses increased as a percentage of net revenue to 21.5% from 17.5%, and the cost of research and development activities increased $13.0 million, or 12.3%, to $118.0 million in fiscal 2012 compared with $105.0 million in fiscal 2011. The increase in research and development expenses primarily reflected a $12.0 million increase in employee compensation and employment-related costs, resulting from a 9.6% increase in research and development staffing and annual compensation adjustments.

Selling, General, and Administrative Expenses. Selling, general, and administrative expenses increased as a percentage of net revenue to 12.8% from 11.5%, and the cost of selling, general, and administrative activities increased $1.5 million, or 2.2%, to $70.0 million in fiscal 2012 compared with $68.5 million in fiscal 2011. The increase in selling, general, and administrative expenses primarily reflected a $4.8 million increase in employee compensation and employment-related costs resulting from a 5.2% increase in selling, general, and administrative staffing and annual compensation adjustments, partially offset by a $2.7 million reduction in non-recurring executive officer resignation costs.

Operating Income.

We generated operating income of $67.6 million, or 12.3% of net revenue, for fiscal 2012, a decrease of $4.9 million compared with $72.5 million, or 12.1% of net revenue, for fiscal 2011. As discussed in the preceding paragraphs, the decrease in operating income was primarily attributable to a decrease in net revenue and a $14.4 million increase in our operating expenses, partially offset by an increase in gross profit resulting from improved gross margins.

Non-Operating Income.

Interest Income. Interest income was $922,000 for fiscal 2012 compared with $911,000 for fiscal 2011.

Interest Expense. Interest expense was $17,000 for fiscal 2012 and 2011.

Impairment of Investments. For fiscal 2012, we recognized a gain of $77,000 on the redemption of $10.1 million of our ARS investments. For fiscal 2011, we recognized a gain of $59,000 on the redemption of $3.2 million of our ARS investments.

 

45


Table of Contents

Provision for Income Taxes.

The provision for income taxes was $14.4 million and $9.7 million for fiscal 2012 and 2011, respectively. The income tax provision represented estimated U.S. federal, state, and foreign taxes for fiscal 2012 and 2011. The effective tax rate for fiscal 2012 was approximately 21.0% and diverged from the combined federal and state statutory rate, primarily as a result of an increase in profits in lower tax rate jurisdictions and the benefit of research tax credits, partially offset by the foreign withholding taxes and net unrecognized tax benefits associated with qualified stock options. The effective tax rate for fiscal 2011 was approximately 13.2% and diverged from the combined federal and state statutory rate, primarily as a result of an increase in profits in lower tax rate jurisdictions, the recognition of previously unrecognized tax benefits, and the benefit of research tax credits, partially offset by the foreign withholding taxes and net unrecognized tax benefits associated with qualified stock options.

Tax benefit associated with total share-based compensation was approximately $9.6 million and $9.7 million for fiscal 2012 and 2011, respectively. Excluding the impact of share-based compensation and the related tax benefit, the effective tax rate for fiscal 2012 and 2011 would have been 23.4% and 18.1%, respectively.

In May 2011, we were notified by the Service that our fiscal 2003 through 2006 and fiscal 2008 through 2010 would be subject to an audit. The early periods are being audited in connection with a mandatory review of tax refunds in excess of $2.0 million when we carried back our fiscal 2008 net operating loss. In April 2012, we received notices of proposed adjustments disallowing certain interest deductions resulting in a potential tax liability of approximately $1.0 million, excluding interest and penalties. We intend to contest the proposed adjustments through the administrative process. While we believe our unrecognized tax benefits associated with the years and issues under audit are adequate, we can make no assurances that an assessment, if any, will not exceed our accrued unrecognized tax benefits.

Fiscal 2011 Compared with Fiscal 2010

Net Revenue.

Net revenue was $598.5 million for fiscal 2011 compared with $514.9 million for fiscal 2010, an increase of $83.6 million, or 16.2%. Of our fiscal 2011 net revenue, $289.4 million, or 48.3%, of net revenue was from the personal computing market and $309.1 million, or 51.7%, of net revenue was from the digital lifestyle product markets, including $304.5 million from mobile smartphones and feature phones. The increase in net revenue for fiscal 2011 was attributable to a $100.0 million, or 47.8%, increase in net revenue from digital lifestyle product applications, partially offset by a decline of $16.4 million, or 5.4%, in net revenue from PC applications due to the weakness in the consumer notebook computer market. The overall increase in net revenue was primarily attributable to a 68.4% increase in unit shipments of digital lifestyle products reflecting higher market penetration of our products in these markets, partially offset by an 8.2% decline in unit shipments in the personal computing market as well as lower priced product mix in the digital lifestyle product markets, general competitive pricing pressure, and a $27.1 million decline in portable digital entertainment device revenue.

Gross Margin.

Gross margin as a percentage of net revenue was 41.1%, or $246.1 million, for fiscal 2011 compared with 40.5%, or $208.7 million, for fiscal 2010. As each custom-designed module we sell utilizes our capacitive sensing technology in a design that is generally unique or specific to an OEM customer’s application, gross margin varies on a product-by-product basis, making our cumulative gross margin a blend of our product specific designs and independent of the vertical markets that our products serve. As a virtual manufacturer, our gross margin percentage is generally not impacted materially by our shipment volume. We charge write-downs to reduce the carrying value of obsolete, slow moving, and non-usable inventory to net realizable value, including warranty costs, to cost of revenue.

Operating Expenses.

Research and Development Expenses. Research and development expenses increased as a percentage of net revenue to 17.5% from 16.8%, and the cost of research and development activities increased $18.5 million, or 21.3%, to $105.0 million in fiscal 2011 compared with $86.6 million in fiscal 2010. The increase in research and development expenses primarily reflected a $9.3 million increase in employee compensation and employment-related costs, resulting from a 19.8% increase in research and development staffing, annual compensation adjustments, a $4.1 million increase in infrastructure and support costs for the additional staffing, a $3.7 million increase in temporary services, and a $1.1 million increase in project specific costs.

 

46


Table of Contents

Selling, General, and Administrative Expenses. Selling, general, and administrative expenses decreased slightly as a percentage of net revenue to 11.5% from 11.7%, and the cost of selling, general, and administrative activities increased $8.5 million, or 14.2%, to $68.5 million in fiscal 2011 compared with $60.0 million in fiscal 2010. The increase in selling, general, and administrative expenses primarily reflected a $3.5 million increase in employee compensation and employment-related costs, resulting from a 10.9% increase in selling, general, and administrative staffing and annual compensation adjustments; $2.7 million of non-recurring executive officer resignation costs; a $1.1 million increase in travel and entertainment costs; and a $728,000 increase in professional fees.

Operating Income.

We generated operating income of $72.5 million, or 12.1% of net revenue, for fiscal 2011, an increase of $10.4 million compared with $62.1 million, or 12.1% of net revenue, for fiscal 2010. As discussed in the preceding paragraphs, the increase in operating income was primarily attributable to an increase in net revenue and gross profit, partially offset by a $27.0 million increase in our operating expenses.

Non-Operating Income/(Loss).

Interest Income. Interest income was $911,000 for fiscal 2011 compared with $977,000 for fiscal 2010. The decrease in interest income resulted from lower average interest rates, partially offset by higher average invested cash balances.

Interest Expense. Interest expense was $17,000 and $2.4 million for fiscal 2011 and 2010, respectively. The reduction in interest expense resulted from the settlement of all but $2.3 million of our convertible notes in December 2009.

Impairment of Investments. In fiscal 2010, a portion of our ARS investments were converted to auction rate preferred stock. Accordingly, we wrote down the remaining value based on our fair value analysis and taking into account the period of time the fair value has been less than our cost. For fiscal 2011, we recognized a gain of $59,000 on the redemption of $3.2 million of our ARS investments and for fiscal 2010 we reduced the carrying value of our ARS investments by $443,000 through an other-than-temporary impairment charge to income.

Provision for Income Taxes.

The provision for income taxes was $9.7 million and $7.3 million for fiscal 2011 and 2010, respectively. The income tax provision represented estimated federal, state, and foreign taxes for fiscal 2011 and 2010. The effective tax rate for fiscal 2011 was approximately 13.2% and diverged from the combined federal and state statutory rate, primarily as a result of an increase in profits in lower tax rate jurisdictions, the release of unrecognized tax benefits, and the benefit of research tax credits, partially offset by the foreign withholding taxes and net unrecognized tax benefits associated with qualified stock options. The effective tax rate for fiscal 2010 was approximately 12.1% and diverged from the combined federal and state statutory rate, primarily as a result of an increase in profits in lower tax rate jurisdictions, the recognition of tax benefit on the carryback of a prior year net operating loss of $1.8 million, the release of unrecognized tax benefits, and the benefit of research tax credits, partially offset by foreign withholding taxes, a write-down of state deferred tax assets, and net unrecognized tax benefits associated with qualified stock options.

Tax benefit associated with total share-based compensation was approximately $9.7 million and $9.6 million for fiscal 2011 and 2010, respectively. Excluding the impact of share-based compensation and the related tax benefit, the effective tax rate for fiscal 2011 and 2010 would have been 18.1% and 17.7%, respectively.

 

47


Table of Contents

Quarterly Results of Operations

The following table sets forth our unaudited quarterly results of operations for the eight quarters in the two-year period ended June 30, 2012. The following table should be read in conjunction with the financial statements and related notes contained elsewhere in this report. We have prepared this unaudited information on the same basis as our audited financial statements. This table includes all adjustments, consisting only of normal recurring adjustments that we consider necessary for a fair presentation of our financial position and results of operations for the quarters presented. Past results of operations are not necessarily indicative of future operating performance; accordingly, you should not draw any conclusions about our future results from the results of operations for any quarter presented.

 

     Three Months Ended  

(in thousands, except per share amounts)

(unaudited)

   June
2012
    March
2012
    December
2011
    September
2011
    June
2011
    March
2011
    December
2010
    September
2010
 

Net revenue

   $ 137,607      $ 131,705      $ 145,470      $ 133,446      $ 143,366      $ 142,406      $ 159,581      $ 153,185   

Cost of revenue

     74,203        69,525        76,747        72,186        82,778        84,790        94,543        90,357   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Gross margin

     63,404        62,180        68,723        61,260        60,588        57,616        65,038        62,828   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Operating expenses:

                

Research and development

     30,476        29,415        29,837        28,226        27,487        25,956        26,640        24,920   

Selling, general, and administrative

     17,584        18,031        17,721        16,709        16,799        17,244        18,958        15,548   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Total operating expenses

     48,060        47,446        47,558        44,935        44,286        43,200        45,598        40,468   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Operating income

     15,344        14,734        21,165        16,325        16,302        14,416        19,440        22,360   

Interest income

     240        231        251        200        232        242        226        211   

Interest expense

     (4     (4     (5     (4     (4     (4     (5     (4

Impairment (loss)/recovery of investments

     18        46        (7     20        39        10        —          10   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Income before income taxes

     15,598        15,007        21,404        16,541        16,569        14,664        19,661        22,577   

Provision for income taxes

     3,298        3,561        4,021        3,526        2,646        1,168        1,983        3,878   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net income

   $ 12,300      $ 11,446      $ 17,383      $ 13,015      $ 13,923      $ 13,496      $ 17,678      $ 18,699   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Net income per share:

                

Basic

   $ 0.37      $ 0.34      $ 0.53      $ 0.40      $ 0.41      $ 0.40      $ 0.52      $ 0.54   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Diluted

   $ 0.36      $ 0.33      $ 0.51      $ 0.39      $ 0.40      $ 0.38      $ 0.50      $ 0.52   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Shares used in computing net income per share:

                

Basic

     33,321        33,389        32,569        32,875        33,816        33,992        33,954        34,402   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Diluted

     34,505        35,179        34,005        33,777        35,011        35,346        35,360        35,900   
  

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Liquidity and Capital Resources

Our cash and cash equivalents, which exclude ARS investments, were $305.0 million as of the end of fiscal 2012 compared with $247.2 million as of the end of fiscal 2011, an increase of $57.8 million. This increase primarily reflected $101.4 million provided from operating cash flows, $34.9 million from the issuance of common stock under our share-based compensation plans, $10.1 million in proceeds from sales and maturities of non-current investments, partially offset by $61.7 million used to repurchase shares of our common stock, $14.6 million used for a business acquisition, and $10.4 million used for the purchase of capital assets. We consider earnings of our foreign subsidiaries indefinitely invested overseas and have made no provision for income or withholding taxes that may result from a future repatriation of those earnings. As of June 2012, $274.5 million of cash and cash equivalents was held by our foreign subsidiaries. If these funds are needed for our operations in the United States, we would be required to accrue and pay U.S. taxes to repatriate these funds.

Cash Flows from Operating Activities. For fiscal 2012, net cash provided by operating activities of $101.4 million was primarily attributable to net income of $54.1 million plus adjustments for non-cash charges, including share-based compensation costs of $34.2 million, depreciation and deferred taxes aggregating $9.5 million, and a net change in operating assets and liabilities of $4.6 million. The net change in operating assets and liabilities related primarily to an increase in accounts payable of $10.2 million, an increase of $6.7 million in income taxes payable and other accrued liabilities, partially offset by an increase of $10.3 million in accounts receivable, net and a $2.8 million increase in inventory. Our days sales outstanding increased from 59 to 68 days from fiscal 2011 to fiscal 2012 as our net revenue was more backend loaded in fiscal 2012 than it was in fiscal 2011. Our inventory turns decreased from 11 to 9 for the same period. For fiscal 2011, net cash provided by operating activities of $89.7 million was primarily attributable to net income of $63.8 million plus adjustments for non-cash charges, including share-based compensation costs of $33.9 million, depreciation and deferred taxes aggregating $7.5 million, and a net decrease in operating assets and liabilities of $14.3 million. The net decrease in operating assets and liabilities related primarily to a decrease in accounts payable of $20.7 million and an increase in inventory of $10.2 million. Our days sales outstanding decreased slightly from 63 to 59 days from fiscal 2010 to fiscal 2011 and our inventory turns decreased from 19 to 11 for the same period. For fiscal 2010, net cash provided by operating activities of $114.0 million was primarily attributable to net income of $53.0 million plus adjustments for non-cash charges, including share-based compensation costs of $35.4 million and depreciation, deferred taxes, amortization of debt issuance costs and debt discount, and impairment of investments, aggregating $4.7 million, and a net increase in operating assets and liabilities of $20.9 million. The net increase in operating assets and liabilities related primarily to an increase in accounts payable of $33.4 million, partially offset by an increase in accounts receivable, net of $16.8 million. Our days sales outstanding decreased slightly from 66 to 63 days from fiscal 2009 to fiscal 2010 and our inventory turns increased from 18 to 19 for the same period.

 

48


Table of Contents

Cash Flows from Investing Activities. Our investing activities for fiscal 2012 included purchases of capital assets, business acquisitions, and redemptions on non-current investments. Investing activities used net cash of $14.9 million for fiscal 2012, used net cash of $8.4 million for fiscal 2011, and generated net cash of $15.6 million for fiscal 2010. Net cash used in investing activities for fiscal 2012 consisted of $14.6 million used for a business acquisition, $10.4 million used for the purchase of capital assets, partially offset by proceeds of $10.1 million from redemptions of ARS investments. Net cash used in investing activities for fiscal 2011 consisted of $11.6 million used for the purchase of capital assets, partially offset by proceeds of $3.2 million for redemptions of ARS investments. Net cash provided by investing activities for fiscal 2010 consisted of proceeds from sales and maturities of $28.9 million for short-term investments and $1.8 million in redemptions of ARS investments, partially offset by $9.1 million used for the purchase of capital assets and $6.0 million used for the purchase of short-term investments.

Cash Flows from Financing Activities. Net cash used in financing activities for fiscal 2012, 2011, and 2010 was $28.7 million, $44.0 million, and $88.8 million, respectively. Our net cash used in financing activities for fiscal 2012 was primarily attributable to $61.7 million used to repurchase shares of our common stock in the open market and $3.9 million used for the payment of payroll taxes for DSUs, partially offset by $34.9 million of proceeds from common stock issued under our share-based compensation plans. Our net cash used in financing activities for fiscal 2011 was primarily attributable to $70.2 million used to repurchase shares of our common stock in the open market and $3.1 million used for the payment of payroll taxes for DSUs, partially offset by $26.4 million of proceeds from common stock issued under share-based compensation plans and $2.9 million excess tax benefit from share-based compensation. Our net cash used in financing activities for fiscal 2010 was primarily attributable to $63.0 million for the retirement of debt and $44.5 million used to repurchase shares of our common stock in the open market and $2.4 million used for the payment of payroll taxes for DSUs, partially offset by $14.0 million of proceeds from common stock issued under share-based compensation plans and $7.1 million from excess tax benefit from share-based compensation.

Common Stock Purchase Program. In October 2011, our Board of Directors approved an additional $100.0 million for the stock repurchase program, expiring in October 2013, bringing the cumulative authorization to $520.0 million. The program authorizes us to purchase our common stock in the open market or in privately negotiated transactions, depending upon market conditions and other factors. The number of shares purchased and the timing of purchases is based on the level of our cash balances, general business and market conditions, and other factors, including alternative investment opportunities. Common stock purchased under this program is held as treasury stock. From April 2005 through the end of fiscal 2012, we purchased 15,784,092 shares of our common stock in the open market for an aggregate cost of $413.9 million. Treasury shares purchased prior to August 28, 2008 were not subject to the stock split on that date, if adjusted for the stock split the average cost would be $20.36. As of the end of fiscal 2012, we had $106.1 million remaining under our common stock purchase program.

Bank Credit Facility. We currently maintain a $50.0 million working capital line of credit with Wells Fargo Bank. The Wells Fargo Bank revolving line of credit, which expires on September 1, 2013, provides for an interest rate equal to the prime lending rate or 250 basis points above LIBOR, depending on whether we choose a variable or fixed rate, respectively. We did not borrow any amounts under the line of credit during and subsequent to fiscal 2012.

$100 Million Shelf Registration. We have registered an aggregate of $100.0 million of common stock and preferred stock for issuance in connection with acquisitions, which shares generally will be freely tradeable after their issuance under Rule 145 of the Securities Act unless held by an affiliate of the acquired company, in which case such shares will be subject to the volume and manner of sale restrictions of Rule 144.

 

49


Table of Contents

Liquidity and Capital Resources. We believe our existing cash and cash equivalents and anticipated cash flows from operating activities will be sufficient to meet our working capital and other cash requirements over the course of at least the next 12 months. Our future capital requirements will depend on many factors, including our revenue, the timing and extent of spending to support product development efforts, costs related to protecting our intellectual property, the expansion of sales and marketing activities, the timing of introductions of new products and enhancements to existing products, the costs to ensure access to adequate manufacturing capacity, the timing and costs of procuring, improving, and renovating office space to meet our anticipated employee headcount requirements, our common stock purchase program, and the amount and timing of our investments in, or acquisitions of, other technologies or companies. Further equity or debt financing may not be available to us on acceptable terms or at all. If sufficient funds are not available or are not available on acceptable terms, our ability to take advantage of unexpected business opportunities or to respond to competitive pressures could be limited or severely constrained.

Our non-current investments consist of ARS investments, which have failed to settle in auctions. These investments are not liquid, and in the event we need to access these funds, we will not be able to do so without a loss of principal, unless a future auction on these investments is successful.

Based on our ability to access our cash and cash equivalents, our expected operating cash flows, and our other sources of cash, we do not anticipate the lack of liquidity on these investments will affect our ability to operate our business as usual. We also do not anticipate remittances of undistributed earnings of our foreign subsidiaries will be necessary to meet our working capital and other cash requirements.

Contractual Obligations and Commercial Commitments

The following table sets forth a summary of our material contractual obligations and commercial commitments as of the end of fiscal 2012 (in millions):

 

     Payments due by period  

Contractual Obligations

   Total      Less than
1 year
     1-3
Years
     3-5
Years
     More than
5 Years
 

Convertible senior subordinated notes (1)

   $ 3       $ —         $ —         $ —         $ 3   

Leases

     9         4         2         1         2   

Purchase obligations and other commitments (2)

     6         5         1         —           —     
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 18       $ 9       $ 3       $ 1       $ 5   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

(1) Represents both principal and interest payable through the maturity date of the underlying contractual obligation.
(2) Purchase obligations and other commitments include payments due under a long-term services agreement and inventory purchase obligations with contract manufacturers.

The amounts in the table above exclude unrecognized tax benefits of $23.1 million. As of the end of fiscal 2012, we were unable to make a reasonably reliable estimate of when cash settlement with a taxing authority may occur in connection with our gross unrecognized tax benefits.

Off-Balance Sheet Arrangements

We do not have any transactions, arrangements, or other relationships with unconsolidated entities that are reasonably likely to materially affect our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, or capital resources. We have no special purpose or limited purpose entities that provide off-balance sheet financing, liquidity, or market or credit risk support; engage in leasing, hedging, or research and development services; or have other relationships that expose us to liability that is not reflected in our financial statements.

Recently Issued Accounting Pronouncements Not Yet Effective

In September 2011, the Financial Accounting Standards Board, or the FASB, issued updated guidance on goodwill impairment that gives companies the option to perform a qualitative assessment that may allow them to skip the annual two-step test and reduce costs. The updated accounting guidance is effective for fiscal years beginning after December 15, 2011. Early application is permitted. This updated guidance becomes effective for us in the first quarter of our fiscal 2013. We do not expect the adoption to have a material impact on our consolidated financial position, results of operations, or cash flows.

 

50


Table of Contents

In June 2011, the FASB issued new guidance on the presentation of comprehensive income. This new guidance requires the components of net income and other comprehensive income to be either presented in one continuous statement, referred to as the statement of comprehensive income, or in two separate but consecutive statements. This new guidance eliminates the current option to report other comprehensive income and its components in the statement of stockholders’ equity. While the new guidance changes the presentation of comprehensive income, there are no changes to the components that are recognized in net income or other comprehensive income under current accounting guidance. This new guidance is effective for our fiscal 2013. As this guidance only amends the presentation of the components of comprehensive income, the adoption will not have an impact on our consolidated financial position, results of operations, or cash flows.

 

51


Table of Contents
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest rate risk

Our exposure to market risk for changes in interest rates relates primarily to our cash and cash equivalents and ARS investments. We do not use our investment portfolio for trading or other speculative purposes.

The table below presents principal amounts and related weighted average interest rates by year of maturity for our cash equivalents, investments, and debt obligations as of the end of fiscal 2012 (in thousands, except average interest rates):

 

Fiscal Year Ended June

   2013     2014      2015      2016      2017      Thereafter     Total     Fair
Value
 

Assets

                    

Cash equivalents – variable rate

                    

Money market

   $  301,451      $ —         $ —         $ —         $ —         $ —        $ 301,451      $ 301,451   

Average interest rate

     0.15     —           —           —           —           —          0.15  

Total cash equivalents

   $ 301,451      $ —         $ —         $ —         $ —         $ —        $ 301,451      $ 301,451   

Average interest rate

     0.15     —           —           —           —           —          0.15  

Non-current investments

   $ —        $ —         $ —         $ —         $ —         $ 27,350      $ 27,350      $ 15,321   

Average interest rate

     —          —           —           —           —           1.85     1.85  

Liabilities

                    

Convertible Senior Subordinated Notes

                    

Fixed rate amounts

   $ —        $ —         $ —         $ —         $ —         $ 2,305      $ 2,305      $ 2,305   

Average interest rate

     —          —           —           —           —           0.75     0.75  

Our Convertible Senior Subordinated Notes bear a fixed coupon interest rate of 0.75% and mature in December 2024. The noteholders could require us to repurchase their notes on December 1, 2014, December 1, 2019, or in the event of a fundamental change as described in the indenture governing the notes. The early repayment of the notes is not reflected in the preceding schedule.

Our non-current investments, which consist of ARS investments, have a par value of $27.4 million and have failed to settle in auctions beginning in 2007. These investments are not liquid, and in the event we need to access these funds, we will not be able to do so without a loss of principal, unless redeemed by the issuers or a future auction on these investments is successful. During fiscal 2012, $10.1 million of our ARS investments were redeemed at par and we recognized a gain of $77,000 on the redemption of these investments, which is included in impairment of investments, net on the accompanying consolidated statements of income.

As there are currently no active markets for our various failed ARS investments, we have estimated the fair value of these investments as of the end of fiscal 2012 using a trinomial discounted cash flow analysis. The analysis considered, among other factors:

 

   

the collateral underlying the security investments;

 

   

the creditworthiness of the counterparty;

 

   

the timing of expected future cash flows;

 

   

the probability of a successful auction in a future period;

 

   

the underlying structure of each investment;

 

   

the present value of future principal and interest payments discounted at rates considered to reflect current market conditions;

 

   

a consideration of the probabilities of default, passing a future auction, or redemption at par for each period; and

 

   

estimates of the recovery rates in the event of default for each investment.

 

52


Table of Contents

When possible, our failed ARS investments were compared to other observable market data or securities with similar characteristics. Our estimate of the fair value of our ARS investments could fluctuate materially from period to period depending on future market conditions.

Contractual maturities for our ARS investments are generally greater than five years, with fair value of $8.9 million maturing from fiscal 2016 to fiscal 2018 and $6.4 million maturing from fiscal 2040 to fiscal 2046. Of our ARS investments $8.9 million par value are investment grade; and the remaining $18.5 million par value are below investment grade.

Based on our ability to access our cash and cash equivalents, our expected operating cash flows, and our other sources of cash, we do not anticipate the lack of liquidity on these investments will affect our ability to operate our business as usual.

There have been no significant changes in the maturity dates and average interest rates for our cash equivalents and debt obligations subsequent to fiscal 2012.

Foreign currency exchange risk

All of our revenue and approximately 91% of our consolidated costs are denominated in U.S. dollars. As a result, we have relatively little exposure to foreign currency exchange risks and foreign exchange losses have been immaterial to date. We do not currently enter into forward-exchange contracts to hedge exposure denominated in foreign currencies or any other derivative financial instruments for trading or speculative purposes. In the future, if our operations change and we determine that our foreign exchange exposure has increased, we may consider entering into hedging transactions to mitigate such risk.

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Reference is made to the financial statements, the report of our independent registered public accounting firm, and the notes thereto commencing at page F-1 of this report, which financial statements, report, and notes are incorporated herein by reference. Reference is also made to the quarterly results of operations on page 48 of this report, which quarterly results of operations are incorporated herein by reference.

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

Not applicable.

 

ITEM 9A. CONTROLS AND PROCEDURES

Conclusions Regarding Disclosure Controls and Procedures

Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer, as of June 30, 2012, concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) are effective to ensure that information required to be disclosed by us in the reports we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Management’s Report on Internal Control Over Financial Reporting

We are responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation under the framework in Internal Control—Integrated Framework, our management concluded that our internal control over financial reporting was effective as of June 30, 2012. The effectiveness of our internal control over financial reporting as of June 30, 2012 has been audited by KPMG LLP, an independent registered public accounting firm, as stated in its report included herein on page F-2.

 

53


Table of Contents

Changes in Internal Control Over Financial Reporting

There was no change in our internal control over financial reporting during our most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls

Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures or our internal controls over financial reporting will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues, misstatements, errors, and instances of fraud, if any, within our company have been or will be prevented or detected. Further, internal controls may become inadequate as a result of changes in conditions, or through the deterioration of the degree of compliance with policies or procedures.

 

ITEM 9B. OTHER INFORMATION

There were no items requiring reporting on Form 8-K that were not reported on Form 8-K during the fourth quarter of the year covered by this Form 10-K.

 

54


Table of Contents

PART III

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this Item relating to directors of our company and corporate governance is incorporated herein by reference to the definitive Proxy Statement to be filed pursuant to Regulation 14A of the Exchange Act for our 2012 Annual Meeting of Stockholders. The information required by this Item relating to our executive officers is included in Item 1. Business – Executive Officers.

We have adopted a code of ethics that applies to our principal executive officer, principal financial officer, and other senior accounting personnel. The “Code of Ethics for the CEO and Senior Financial Officers” is located on our website at www.synaptics.com in the Investor Relations section under Corporate Governance.

We intend to satisfy the disclosure requirement under Item 5.05(c) of Form 8-K regarding any amendment to, or waiver from, a provision of this code of ethics by posting such information on our website, at the address and location specified above.

 

ITEM 11. EXECUTIVE COMPENSATION

The information required by this Item is incorporated herein by reference to the definitive Proxy Statement (particularly under the caption “Executive Compensation”) to be filed pursuant to Regulation 14A of the Exchange Act for our 2012 Annual Meeting of Stockholders.

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by this Item is incorporated herein by reference to the definitive Proxy Statement (particularly under the caption “Security Ownership of Principal Stockholders, Directors, and Officers”) to be filed pursuant to Regulation 14A of the Exchange Act for our 2012 Annual Meeting of Stockholders.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this Item is incorporated herein by reference to the definitive Proxy Statement (particularly under the caption “Certain Relationships and Related Transactions”) to be filed pursuant to Regulation 14A of the Exchange Act for our 2012 Annual Meeting of Stockholders.

 

ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES

The information required by this Item is incorporated herein by reference to the definitive Proxy Statement (particularly under the caption “Ratification of Appointment of Independent Auditor”) to be filed pursuant to Regulation 14A of the Exchange Act for our 2012 Annual Meeting of Stockholders.

 

55


Table of Contents

PART IV

 

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

 

(a) Financial Statements and Financial Statement Schedules

 

  (1) Financial Statements are listed in the Index to Financial Statements on page F-1 of this report.

 

(b) Exhibits

 

Exhibit
Number

 

Exhibit

3.1   Certificate of Incorporation (1)
3.1(b)   Certificate of Designation of Series A Junior Participating Preferred Stock (2)
3.2   Third Amended and Restated Bylaws (amended and restated as of July 27, 2010) (3)
3.3   Certificate of Amendment of Certificate of Incorporation of the registrant (4)
3.4   Certificate of Amendment of Certificate of Incorporation of the registrant (5)
4   Form of Common Stock Certificate (6)
4(b)   Rights Agreement, dated as of August 15, 2002, between the registrant and American Stock Transfer & Trust Company, as Rights Agent (2)
4(c)   Amendment No. 1 to Rights Agreement (7)
4.6   Form of Indenture (8)
10.6(a)*   Amended and Restated 2001 Incentive Compensation Plan (as amended through January 23, 2007) (9)
10.6(b)*   Form of grant agreements for Amended and Restated 2001 Incentive Compensation Plan (10)
10.6(c)*   Form of deferred stock award agreement for Amended and Restated 2001 Incentive Compensation Plan (11)
10.8*   401(k) Profit Sharing Plan (12)
10.17*   Form of Indemnification Agreement entered into with the following directors and executive officers as of January 28, 2002 with Francis F. Lee, Russell J. Knittel, Keith B. Geeslin, and Richard L. Sanquini; as of June 26, 2004 with Jeffrey D. Buchanan; as of March 28, 2006 with Hing Chung (Alex) Wong; as of February 20, 2007 with Nelson C. Chan; as of April 2, 2007 with Mark N. Vena; as of October 23, 2007 with James L. Whims; as of January 7, 2008 with David B. Long; as of March 2, 2009 with Kathleen A. Bayless; as of June 23, 2010 with Stanley A. Swearingen; as of January 10, 2011 with Kevin D. Barber; as of September 28, 2011 with Richard A. Bergman; and as of May 22, 2012 with Bret Sewell (1)
10.24(a)*   2010 Incentive Compensation Plan (13)
10.24(b)*   Form of Non-Qualified Stock Option Agreement for 2010 Incentive Compensation Plan (14)
10.24(c)*   Form of Incentive Stock Option Agreement for 2010 Incentive Compensation Plan (14)
10.24(d)*   Form of Deferred Stock Award Agreement for 2010 Incentive Compensation Plan (14)
10.24(e)*   Amended and Restated 2010 Incentive Compensation Plan (15)
10.25*   2010 Employee Stock Purchase Plan (14)
10.26*   Separation Agreement and Release dated October 13, 2010 by and among the registrant and Thomas J. Tiernan (16)
10.27*   Employment Offer Letter dated September 28, 2011 between the registrant and Richard Bergman (17)
10.28*   Change of Control Severance Agreement entered into by Richard A. Bergman as of October 4, 2011 (18)
10.29*   Severance Policy for Principal Executive Officers (18)
10.30   Agreement of Purchase and Sale and Escrow Instructions dated as of June 25, 2012 between McKay Henry, LLC and the registrant
10.30(a)   First Amendment to Agreement of Purchase and Sale and Escrow Instructions dated as of July 2, 2012 between McKay Henry, LLC and the registrant
21   List of Subsidiaries
23.1   Consent of Independent Registered Public Accounting Firm
31.1   Certification of Chief Executive Officer pursuant to Rule 13a-14(a)/15d-14(a)
31.2   Certification of Chief Financial Officer pursuant to Rule 13a-14(a)/15d-14(a)
32.1   Section 1350 Certification of Chief Executive Officer
32.2   Section 1350 Certification of Chief Financial Officer

 

56


Table of Contents
101.INS†    XBRL Instance Document
101.SCH†    XBRL Taxonomy Extension Schema Document
101.CAL†    XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF†    XBRL Taxonomy Extension Definition Linkbase Document
101.LAB†    XBRL Taxonomy Extension Label Linkbase Document
101.PRE†    XBRL Taxonomy Extension Presentation Linkbase Document

 

 

(1) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on February 21, 2002.
(2) Incorporated by reference to the registrant’s Form 8-A as filed with the SEC on August 16, 2002.
(3) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on August 2, 2010.
(4) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on December 7, 2004.
(5) Incorporation by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 22, 2010.
(6) Incorporated by reference to the registrant’s Form 10-K as filed with the SEC on September 12, 2002.
(7) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on April 24, 2008.
(8) Incorporated by reference to the registrant’s registration statement on Form S-3 (Registration No. 333-155582) as filed with the SEC on November 21, 2008 and declared effective May 7, 2009.
(9) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on November 8, 2007.
(10) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on February 6, 2003.
(11) Incorporated by reference to the registrant’s Form 10-K as filed with the SEC on September 7, 2006.
(12) Incorporated by reference to the registrant’s registration statement on Form S-1 (Registration No. 333-56026) as filed with the SEC on August 17, 2001 and declared effective January 28, 2002.
(13) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on November 2, 2010.
(14) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 22, 2010.
(15) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on May 4, 2012.
(16) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 13, 2010.
(17) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 4, 2011.
(18) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 6, 2011.
* Indicates a contract with management or compensatory plan or arrangement.
Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, are deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise are not subject to liability under those sections.

 

57


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

    SYNAPTICS INCORPORATED
Date August 24, 2012     By:   /s/ Richard A. Bergman
      Richard A. Bergman
      President and Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/s/ Richard A. Bergman

Richard A. Bergman

  

President and Chief Executive Officer, and Director

  August 24, 2012

/s/ Kathleen A. Bayless

Kathleen A. Bayless

   Senior Vice President, Chief Financial Officer, Secretary and Treasurer (Principal Financial and Accounting Officer)   August 24, 2012

/s/ Francis F. Lee

Francis F. Lee

  

Chairman of the Board

  August 24, 2012

/s/ Jeffrey D. Buchanan

Jeffrey D. Buchanan

  

Director

  August 24, 2012

/s/ Nelson C. Chan

Nelson C. Chan

  

Director

  August 24, 2012

/s/ Keith B. Geeslin

Keith B. Geeslin

  

Director

  August 24, 2012

/s/ Russell J. Knittel

Russell J. Knittel

  

Director

  August 24, 2012

/s/ Richard L. Sanquini

Richard L. Sanquini

  

Director

  August 24, 2012

/s/ James L. Whims

James L. Whims

  

Director

  August 24, 2012

 

58


Table of Contents

INDEX TO EXHIBITS

 

Exhibit    

Number

 

Exhibit

3.1   Certificate of Incorporation (1)
3.1(b)   Certificate of Designation of Series A Junior Participating Preferred Stock (2)
3.2   Third Amended and Restated Bylaws (amended and restated as of July 27, 2010) (3)
3.3   Certificate of Amendment of Certificate of Incorporation of the registrant (4)
3.4   Certificate of Amendment of Certificate of Incorporation of the registrant (5)
4   Form of Common Stock Certificate (6)
4(b)   Rights Agreement, dated as of August 15, 2002, between the registrant and American Stock Transfer & Trust Company, as Rights Agent (2)
4(c)   Amendment No. 1 to Rights Agreement (7)
4.6   Form of Indenture (8)
10.6(a)*   Amended and Restated 2001 Incentive Compensation Plan (as amended through January 23, 2007) (9)
10.6(b)*   Form of grant agreements for Amended and Restated 2001 Incentive Compensation Plan (10)
10.6(c)*   Form of deferred stock award agreement for Amended and Restated 2001 Incentive Compensation Plan (11)
10.8*   401(k) Profit Sharing Plan (12)
10.17*   Form of Indemnification Agreement entered into with the following directors and executive officers as of January 28, 2002 with Francis F. Lee, Russell J. Knittel, Keith B. Geeslin, and Richard L. Sanquini; as of June 26, 2004 with Jeffrey D. Buchanan; as of March 28, 2006 with Hing Chung (Alex) Wong; as of February 20, 2007 with Nelson C. Chan; as of April 2, 2007 with Mark N. Vena; as of October 23, 2007 with James L. Whims; as of January 7, 2008 with David B. Long; as of March 2, 2009 with Kathleen A. Bayless; as of June 23, 2010 with Stanley A. Swearingen; as of January 10, 2011 with Kevin D. Barber; as of September 28, 2011 with Richard A. Bergman; and as of May 22, 2012 with Bret Sewell (1)
10.24(a)*   2010 Incentive Compensation Plan (13)
10.24(b)*   Form of Non-Qualified Stock Option Agreement for 2010 Incentive Compensation Plan (14)
10.24(c)*   Form of Incentive Stock Option Agreement for 2010 Incentive Compensation Plan (14)
10.24(d)*   Form of Deferred Stock Award Agreement for 2010 Incentive Compensation Plan (14)
10.24(e)*   Amended and Restated 2010 Incentive Compensation Plan (15)
10.25*   2010 Employee Stock Purchase Plan (14)
10.26*   Separation Agreement and Release dated October 13, 2010 by and among the registrant and Thomas J. Tiernan (16)
10.27*   Employment Offer Letter dated September 28, 2011 between the registrant and Richard Bergman (17)
10.28*   Change of Control Severance Agreement entered into by Richard A. Bergman as of October 4, 2011 (18)
10.29*   Severance Policy for Principal Executive Officers (18)
10.30   Agreement of Purchase and Sale and Escrow Instructions dated as of June 25, 2012 between McKay Henry, LLC and the registrant
10.30(a)   First Amendment to Agreement of Purchase and Sale and Escrow Instructions dated as of July 2, 2012 between McKay Henry, LLC and the registrant
21   List of Subsidiaries
23.1   Consent of Independent Registered Public Accounting Firm
31.1   Certification of Chief Executive Officer pursuant to Rule 13a-14(a)/15d-14(a)
31.2   Certification of Chief Financial Officer pursuant to Rule 13a-14(a)/15d-14(a)
32.1   Section 1350 Certification of Chief Executive Officer
32.2   Section 1350 Certification of Chief Financial Officer
101.INS†   XBRL Instance Document
101.SCH†   XBRL Taxonomy Extension Schema Document
101.CAL†   XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF†   XBRL Taxonomy Extension Definition Linkbase Document
101.LAB†   XBRL Taxonomy Extension Label Linkbase Document
101.PRE†   XBRL Taxonomy Extension Presentation Linkbase Document

 

59


Table of Contents

 

(1) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on February 21, 2002.
(2) Incorporated by reference to the registrant’s Form 8-A as filed with the SEC on August 16, 2002.
(3) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on August 2, 2010.
(4) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on December 7, 2004.
(5) Incorporation by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 22, 2010.
(6) Incorporated by reference to the registrant’s Form 10-K as filed with the SEC on September 12, 2002.
(7) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on April 24, 2008.
(8) Incorporated by reference to the registrant’s registration statement on Form S-3 (Registration No. 333-155582) as filed with the SEC on November 21, 2008 and declared effective May 7, 2009.
(9) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on November 8, 2007.
(10) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on February 6, 2003.
(11) Incorporated by reference to the registrant’s Form 10-K as filed with the SEC on September 7, 2006.
(12) Incorporated by reference to the registrant’s registration statement on Form S-1 (Registration No. 333-56026) as filed with the SEC on August 17, 2001 and declared effective January 28, 2002.
(13) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on November 2, 2010.
(14) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 22, 2010.
(15) Incorporated by reference to the registrant’s Form 10-Q as filed with the SEC on May 4, 2012.
(16) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 13, 2010.
(17) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 4, 2011.
(18) Incorporated by reference to the registrant’s Current Report on Form 8-K as filed with the SEC on October 6, 2011.
* Indicates a contract with management or compensatory plan or arrangement.
Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, are deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise are not subject to liability under those sections.

 

60


Table of Contents

INDEX TO FINANCIAL STATEMENTS

SYNAPTICS INCORPORATED AND SUBSIDIARIES

 

Report of Independent Registered Public Accounting Firm

     F-2   

Consolidated Balance Sheets

     F-3   

Consolidated Statements of Income

     F-4   

Consolidated Statements of Stockholders’ Equity and Comprehensive Income

     F-5   

Consolidated Statements of Cash Flows

     F-6   

Notes to Consolidated Financial Statements

     F-7   

 

F-1


Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders

Synaptics Incorporated:

We have audited the accompanying consolidated balance sheets of Synaptics Incorporated and subsidiaries (the Company) as of June 30, 2012 and June 25, 2011, and the related consolidated statements of income, stockholders’ equity and comprehensive income, and cash flows for each of the years in the three-year period ended June 30, 2012. We also have audited the Company’s internal control over financial reporting as of June 30, 2012, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting appearing under Item 9A. Our responsibility is to express an opinion on these consolidated financial statements and an opinion on the Company’s internal control over financial reporting based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the consolidated financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Synaptics Incorporated and subsidiaries as of June 30, 2012 and June 25, 2011, and the results of their operations and their cash flows for each of the years in the three-year period ended June 30, 2012, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of June 30, 2012, based on criteria established in Internal Control – Integrated Framework issued by the COSO.

/s/ KPMG LLP

Santa Clara, California

August 24, 2012

 

F-2


Table of Contents

SYNAPTICS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in thousands, except par value and share amounts)

 

     June
2012
    June
2011
 
ASSETS     

Current Assets:

    

Cash and cash equivalents

   $ 305,005      $ 247,153   

Accounts receivable, net of allowances of $567 and $709 at June 2012 and 2011, respectively

     104,140        93,808   

Inventories

     31,667        28,850   

Prepaid expenses and other current assets

     5,365        4,373   
  

 

 

   

 

 

 

Total current assets

     446,177        374,184   

Property and equipment, net

     24,903        26,222   

Goodwill

     18,995        1,927   

Purchased intangibles

     12,800        —     

Non-current investments

     15,321        25,876   

Other assets

     23,309        27,992   
  

 

 

   

 

 

 
   $ 541,505      $ 456,201   
  

 

 

   

 

 

 
LIABILITIES AND STOCKHOLDERS’ EQUITY     

Current Liabilities:

    

Accounts payable

   $ 55,220      $ 44,930   

Accrued compensation

     12,642        13,210   

Income taxes payable

     11,221        11,808   

Other accrued liabilities

     26,515        22,813   
  

 

 

   

 

 

 

Total current liabilities

     105,598        92,761   

Notes payable

     2,305        2,305   

Other liabilities

     36,812        21,142   

Commitments and contingencies

    

Stockholders’ Equity:

    

Preferred stock:

    

$0.001 par value; 10,000,000 shares authorized; no shares issued and outstanding

     —          —     

Common stock:

    

$0.001 par value; 120,000,000 shares authorized, 48,680,348 and 46,832,208 shares issued, and 32,896,256 and 33,465,732 shares outstanding, at June 2012 and 2011, respectively

     49        47   

Additional paid-in capital

     471,569        406,653   

Treasury stock: 15,784,092 and 13,366,476 common shares at June 2012 and 2011, respectively, at cost

     (413,885     (352,142

Accumulated other comprehensive income

     1,998        2,520   

Retained earnings

     337,059        282,915   
  

 

 

   

 

 

 

Total stockholders’ equity

     396,790        339,993   
  

 

 

   

 

 

 
   $ 541,505      $ 456,201   
  

 

 

   

 

 

 

See notes to consolidated financial statements.

 

F-3


Table of Contents

SYNAPTICS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME

(in thousands, except per share amounts)

 

     Fiscal  
     2012     2011     2010  

Net revenue

   $ 548,228      $ 598,538      $ 514,890   

Cost of revenue

     292,661        352,468        306,188   
  

 

 

   

 

 

   

 

 

 

Gross margin

     255,567        246,070        208,702   
  

 

 

   

 

 

   

 

 

 

Operating expenses:

      

Research and development

     117,954        105,003        86,552   

Selling, general, and administrative

     70,045        68,549        60,027   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     187,999        173,552        146,579   
  

 

 

   

 

 

   

 

 

 

Operating income

     67,568        72,518        62,123   

Interest income

     922        911        977   

Interest expense

     (17     (17     (2,400

Impairment (loss)/recovery on investments, net

     77        59        (443
  

 

 

   

 

 

   

 

 

 

Income before provision for income taxes

     68,550        73,471        60,257   

Provision for income taxes

     14,406        9,675        7,292   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 54,144      $ 63,796      $ 52,965   
  

 

 

   

 

 

   

 

 

 

Net income per share:

      

Basic

   $ 1.64      $ 1.87      $ 1.57   
  

 

 

   

 

 

   

 

 

 

Diluted

   $ 1.57      $ 1.80      $ 1.50   
  

 

 

   

 

 

   

 

 

 

Shares used in computing net income per share:

      

Basic

     33,030        34,042        33,836   
  

 

 

   

 

 

   

 

 

 

Diluted

     34,435        35,454        35,423   
  

 

 

   

 

 

   

 

 

 

See notes to consolidated financial statements.

 

F-4


Table of Contents

SYNAPTICS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY AND COMPREHENSIVE INCOME

(in thousands, except share amounts)

 

     Common Stock     

Additional

Paid-in

    Treasury    

Accumulated

Other

Comprehensive

    Retained     

Total

Stockholders’

 
     Shares      Amount      Capital     Stock     Income/(Loss)     Earnings      Equity  

Balance at June 2009

     43,779,011       $ 44       $ 293,666      $ (237,387   $ 129      $ 166,154       $ 222,606   

Components of comprehensive income:

                 

Net income

     —           —           —          —          —          52,965         52,965   

Net unrealized gain on available-for-sale investments

     —           —           —          —          1,386        —           1,386   
                 

 

 

 

Total comprehensive income

                    54,351   
                 

 

 

 

Issuance of common stock for share-based award compensation plans

     1,112,823         1         14,030        —          —          —           14,031   

Payroll taxes for deferred stock units

     —           —           (2,374     —          —          —           (2,374

Purchases of treasury stock

     —           —           —          (44,545     —          —           (44,545

Tax benefit associated with share-based awards

     —           —           7,066        —          —          —           7,066   

Share-based compensation

     —           —           35,376        —          —          —           35,376   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

 

Balance at June 2010

     44,891,834         45         347,764        (281,932     1,515        219,119         286,511   

Components of comprehensive income:

                 

Net income

     —           —           —          —          —          63,796         63,796   

Net unrealized gain on available-for-sale investments

     —           —           —          —          1,005        —           1,005   
                 

 

 

 

Total comprehensive income

                    64,801   
                 

 

 

 

Issuance of common stock for share-based award compensation plans

     1,940,374         2         26,421        —          —          —           26,423   

Payroll taxes for deferred stock units

     —           —           (3,147     —          —          —           (3,147

Purchases of treasury stock

     —           —           —          (70,210     —          —           (70,210

Tax benefit associated with share-based awards

     —           —           1,690        —          —          —           1,690   

Share-based compensation

     —           —           33,925        —          —          —           33,925   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

 

Balance at June 2011

     46,832,208         47         406,653        (352,142     2,520        282,915         339,993   

Components of comprehensive income:

                 

Net income

     —           —           —          —          —          54,144         54,144   

Net unrealized loss on available-for-sale investments

     —           —           —          —          (522     —           (522
                 

 

 

 

Total comprehensive income

                    53,622   
                 

 

 

 

Issuance of common stock for share-based award compensation plans

     1,848,140         2         34,874        —          —          —           34,876   

Payroll taxes for deferred stock units

     —           —           (3,946     —          —          —           (3,946

Purchases of treasury stock

     —           —           —          (61,743     —          —           (61,743

Tax shortfall associated with share-based awards

     —           —           (173     —          —          —           (173

Share-based compensation

     —           —           34,161        —          —          —           34,161   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

 

Balance at June 2012

     48,680,348       $ 49       $ 471,569      $ (413,885   $ 1,998      $ 337,059       $ 396,790   
  

 

 

    

 

 

    

 

 

   

 

 

   

 

 

   

 

 

    

 

 

 

See notes to consolidated financial statements.

 

F-5


Table of Contents

SYNAPTICS INCORPORATED AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

 

     Fiscal  
     2012     2011     2010  

Cash flows from operating activities

      

Net income

   $ 54,144      $ 63,796      $ 52,965   

Adjustments to reconcile net income to net cash provided by operating activities:

      

Share-based compensation costs

     34,161        33,925        35,376   

Depreciation and amortization

     10,409        11,169        8,677   

Amortization of debt issuance costs

     —          —          118   

Amortization of debt discount

     —          —          2,069   

Tax benefit (shortfall) realized from share-based compensation

     (173     1,690        7,066   

Excess tax benefit from share-based compensation

     (2,153     (2,886     (7,066

Deferred taxes

     (741     (3,666     (6,534

Impairment of property and equipment

     1,269        —          —     

Impairment (recovery) of investments, net

     (77     (59     443   

Changes in operating assets and liabilities:

      

Accounts receivable, net

     (10,329     7,701        (16,770

Inventories

     (2,817     (10,183     (3,717

Prepaid expenses and other current assets

     (530     (146     (128

Other assets

     1,894        332        (4,230

Accounts payable

     10,235        (20,688     33,408   

Accrued compensation

     (634     1,880        2,880   

Income taxes payable

     3,000        2,975        2,214   

Other accrued liabilities

     3,735        3,873        7,237   
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     101,393        89,713        114,008   
  

 

 

   

 

 

   

 

 

 

Cash flows from investing activities

      

Purchases of short-term investments

     —          —          (5,986

Proceeds from sales and maturities of short-term investments

     —          —          28,912   

Proceeds from sales and maturities of non-current investments

     10,110        3,200        1,775   

Acquisition of business, net of cash acquired

     (14,632     —          —     

Purchases of property and equipment

     (10,359     (11,570     (9,067
  

 

 

   

 

 

   

 

 

 

Net cash (used in)/provided by investing activities

     (14,881     (8,370     15,634   
  

 

 

   

 

 

   

 

 

 

Cash flows from financing activities

      

Purchases of treasury stock

     (61,743     (70,210     (44,545

Proceeds from issuance of shares

     34,876        26,423        14,031   

Retirement of debt, net of discount

     —          —          (62,998

Excess tax benefit from share-based compensation

     2,153        2,886        7,066   

Payroll taxes for deferred stock units

     (3,946     (3,147     (2,374
  

 

 

   

 

 

   

 

 

 

Net cash used in financing activities

     (28,660     (44,048     (88,820
  

 

 

   

 

 

   

 

 

 

Net increase in cash and cash equivalents

     57,852        37,295        40,822   

Cash and cash equivalents at beginning of period

     247,153        209,858        169,036   
  

 

 

   

 

 

   

 

 

 

Cash and cash equivalents at end of period

   $ 305,005      $ 247,153      $ 209,858   
  

 

 

   

 

 

   

 

 

 

Supplemental disclosures of cash flow information

      

Cash paid for taxes

   $ 12,305      $ 9,574      $ 11,789   
  

 

 

   

 

 

   

 

 

 

See notes to consolidated financial statements.

 

F-6


Table of Contents

SYNAPTICS INCORPORATED AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1. Organization and Summary of Significant Accounting Policies

Organization and Basis of Presentation

We are a leading worldwide developer and supplier of custom-designed user interface solutions that enable people to interact more easily and intuitively with a wide variety of mobile computing, communications, entertainment, and other electronic devices. We currently target the personal computer, or PC, market, primarily notebook and ultrabook computers, the markets for digital lifestyle products, including mobile smartphones and feature phones, the tablet market, and other select electronic device markets with our customized human interface solutions. Our original equipment manufacturer, or OEM, customers include most of the tier one PC OEMs and many of the world’s largest OEMs for mobile smartphones and feature phones.

The consolidated financial statements are presented in accordance with U.S. generally accepted accounting principles, or U.S. GAAP, and include our financial statements and those of our wholly owned subsidiaries. All significant intercompany balances and transactions have been eliminated upon consolidation.

Our fiscal year is the 52- or 53-week period ending on the last Saturday in June. The fiscal years presented in this report were a 53-week period ended June 30, 2012 and 52-week periods ended June 25, 2011 and June 26, 2010.

Use of Estimates

The preparation of consolidated financial statements in conformity with U.S. GAAP requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue, expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to revenue recognition, allowance for doubtful accounts, cost of revenue, inventories, loss on purchase commitments, product warranty, share-based compensation costs, provision for income taxes, deferred income tax asset valuation allowances, uncertain tax positions, tax contingencies, goodwill, intangible assets, investments, and contingencies. We base our estimates on historical experience, applicable laws and regulations, and various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

Cash Equivalents and Investments

Cash equivalents consist of highly liquid investments with original maturities of three months or less. Our non-current investments are reported at fair value, with unrealized gains and losses excluded from earnings and shown separately as a component of accumulated other comprehensive income within stockholders’ equity. We charge other-than-temporary declines in the fair value of a debt security to earnings if the decline is due to a credit loss or if we intend to or need to sell at a loss, resulting in the establishment of a new cost basis in the debt security. We charge other-than-temporary declines in the fair value of a debt security to other comprehensive income if the decline is due to a noncredit loss. We charge other-than-temporary declines in the fair value of equity securities to earnings, resulting in the establishment of a new cost basis in the equity security. We include interest earned on securities in interest income. We determine realized gains and losses on the sale of securities using the specific identification method.

 

F-7


Table of Contents

Amortized cost, gross unrealized gains and losses, and estimated fair value of our investments in available-for-sale securities and cash equivalents as of the end of fiscal 2012 and 2011 were as follows (in thousands):

 

     2012  
     Amortized
Cost
     Gross
Unrealized
Gains
     Gross
Unrealized
Losses
     Estimated
Fair

Value
 

Money market

   $ 301,451       $ —         $ —         $ 301,451   

Auction rate securities

     13,323         2,276         278         15,321   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total available-for-sale securities

   $ 314,774       $ 2,276       $ 278       $ 316,772   
  

 

 

    

 

 

    

 

 

    

 

 

 
     2011  
     Amortized
Cost
     Gross
Unrealized
Gains
     Gross
Unrealized
Losses
     Estimated
Fair

Value
 

Money market

   $ 243,966       $ —         $ —         $ 243,966   

Auction rate securities

     23,356         3,291         771         25,876   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total available-for-sale securities

   $ 267,322       $ 3,291       $ 771       $ 269,842   
  

 

 

    

 

 

    

 

 

    

 

 

 

Fair Values

We measure certain financial assets and liabilities at fair value. When we measure fair value on either a recurring or nonrecurring basis, inputs used in valuation techniques are assigned a hierarchical level as follows:

 

   

Level 1 inputs are observable inputs that reflect quoted prices (unadjusted) for identical assets or liabilities in active markets.

 

   

Level 2 inputs reflect quoted prices for identical assets or liabilities in markets that are not active; quoted prices for similar assets or liabilities in active markets; inputs other than quoted prices that are observable for the assets or liabilities; or inputs that are derived principally from or corroborated by observable market data by correlation or other means.

 

   

Level 3 inputs are unobservable inputs reflecting our assumptions, which are incorporated into valuation techniques and models used to determine fair value. The assumptions are consistent with market participant assumptions that are reasonably available.

Financial assets and liabilities measured at fair value on a recurring basis, by level within the fair value hierarchy, as of the end of fiscal 2012 and 2011 were as follows (in thousands):

 

     2012      2011  
     Level 1      Level 3      Level 1      Level 3  

Assets

           

Money market

   $ 301,451       $ —         $ 243,966       $ —     

Auction rate securities

     —           15,321         —           25,876   
  

 

 

    

 

 

    

 

 

    

 

 

 

Total available-for-sale securities

   $ 301,451       $ 15,321       $ 243,966       $ 25,876   
  

 

 

    

 

 

    

 

 

    

 

 

 

Liabilities

           

Contingent consideration liability recorded for business combination

   $ —         $ 11,900       $ —         $ —     
  

 

 

    

 

 

    

 

 

    

 

 

 

 

F-8


Table of Contents

Money market balances are included in cash and cash equivalents as of the end of fiscal 2012 and 2011. ARS investments are included in non-current investments as of the end of fiscal 2012 and 2011. We have classified the contingent consideration recorded for a business combination as a Level 3 liability, which is included in the non-current portion of other liabilities as of the end of fiscal 2012. There have been no transfers of the value of this Level 3 liability during fiscal 2012 and there has been no material change to the value of this Level 3 liability during fiscal 2012. See Note 12 – Acquisition of Pacinian. There were no Level 2 financial assets or liabilities as of the end of fiscal 2012 or 2011.

Changes in fair value of our Level 3 financial assets for fiscal 2012 and 2011 were as follows (in thousands):

 

     2012     2011  

Beginning balance

   $ 25,876      $ 28,012   

Net unrealized gain/(loss)

     (522     1,005   

Impairment recovery of redeemed investments

     77        59   

Redemptions

     (10,110     (3,200
  

 

 

   

 

 

 

Ending balance

   $ 15,321      $ 25,876   
  

 

 

   

 

 

 

There were no transfers in or out of our Level 1, 2, or 3 assets during fiscal 2012 or 2011.

The fair values of our cash equivalents, accounts receivable, and accounts payable approximate their carrying values because of the short-term nature of those instruments. The fair value of our notes payable approximates their carrying value.

Concentration of Credit Risk

Financial instruments that potentially subject us to concentrations of credit risk consist primarily of cash equivalents, investments, and trade accounts receivable. Our investment policy, which is predicated on capital preservation and liquidity, limits investments to U.S. government treasuries and agency issues, taxable securities, and municipal issued securities with a minimum rating of A1 (Moody’s) or P1 (Standard and Poor’s) or equivalent. Included within our investment portfolio are investments in ARS investments, which met our investment guidelines at the time of our investment. Our ARS investments are currently not liquid as a result of continued auction failures. If the issuers are not able to meet their payment obligations or if we sell our ARS investments before they recover, we may lose some or all of our principal invested or may be required to further reduce the carrying value. We do not intend to sell our ARS investments for significantly less than par value.

We sell our products primarily to contract manufacturers that provide manufacturing services for OEMs. We extend credit based on an evaluation of a customer’s financial condition, and we generally do not require collateral. To date, credit losses on our accounts receivable have been insignificant, and we believe that an adequate allowance for doubtful accounts has been provided.

The following customers accounted for more than 10% of our accounts receivable balance as the end of fiscal 2012 and 2011:

 

     2012     2011  

Customer A

     14     12

Customer B

     12     *   

 

  * Less than 10%

Other Concentrations

Our products include certain components that are currently single sourced. We believe other vendors would be able to provide similar components; however, the qualification of such vendors may require start-up time. In order to mitigate any adverse impacts from a disruption of supply, we strive to maintain an adequate supply of critical single-sourced components.

 

F-9


Table of Contents

Revenue Recognition

We recognize revenue from product sales when there is persuasive evidence that an arrangement exists, delivery has occurred and title has transferred, the price is fixed or determinable, and collection is reasonably assured, which is generally upon shipment. We accrue for estimated sales returns and other allowances, based on historical experience, at the time we recognize revenue.

Allowance for Doubtful Accounts

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of customers to meet their financial obligations. On an ongoing basis, we evaluate the collectability of accounts receivable based on a combination of factors. In circumstances in which we are aware of a specific customer’s potential inability to meet its financial obligation, we record a specific reserve of the bad debt against amounts due. In addition, we make judgments and estimates on the collectability of accounts receivable based on our historical bad debt experience, customers’ creditworthiness, current economic trends, recent changes in customers’ payment trends, and deterioration in customers’ operating results or financial position. If circumstances change adversely, additional bad debt allowances may be required.

Cost of Revenue

Our cost of revenue includes the cost of products shipped to our customers, which primarily includes the cost of products built to our specifications by our contract manufacturers, the cost of silicon wafers supplied by independent wafer foundries and the related assembly, package and test costs of our die and packaged ASICs. Also included in our cost of revenue are personnel and related costs, including share-based compensation, for quality assurance and manufacturing support; logistics costs; depreciation of equipment supporting manufacturing; license amortization; provisions for excess and obsolete inventories; and warranty costs.

Inventories

Inventories are stated at the lower of cost (first-in, first-out method) or market (estimated net realizable value) as of the end of fiscal 2012 and 2011 and consisted of the following (in thousands):

 

      2012      2011  

Raw materials

   $ 26,957       $ 23,545   

Finished goods

     4,710         5,305   
  

 

 

    

 

 

 
     $31,667       $ 28,850   
  

 

 

    

 

 

 

Periodically, we purchase inventory from our contract manufacturers when a customer delays its delivery schedule or cancels its