form10k.htm
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
(Mark One)
|
|
x
|
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the fiscal year ended December 31, 2013
Or
|
o
|
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the transition period from to
|
Commission File Number 001-34627
GENERAC HOLDINGS INC.
(Exact name of registrant as specified in its charter)
DELAWARE
(State or other jurisdiction of incorporation or organization)
|
20-5654756
(IRS Employer Identification No.)
|
S45 W29290 Hwy. 59, Waukesha, WI
(Address of principal executive offices)
|
53189
(Zip Code)
|
(262) 544-4811
(Registrant’s telephone number, including area code)
|
SECURITIES REGISTERED PURSUANT TO SECTION 12(B) OF THE ACT:
|
Common Stock, $0.01 par value
(Title of class)
|
New York Stock Exchange
(Name of exchange on which registered)
|
SECURITIES REGISTERED PURSUANT TO SECTION 12(G) OF THE ACT: None
|
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer x
|
Accelerated filer o
|
Non-accelerated filer o
(Do not check if a smaller
reporting company)
|
Smaller reporting company o
|
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No x
The aggregate market value of the voting common equity held by non-affiliates of the registrant on June 28, 2013, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $2,175,882,000 based upon the closing price reported for such date on the New York Stock Exchange.
As of February 24, 2014, 68,779,944 shares of registrant's common stock were outstanding.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s Proxy Statement for the 2014 Annual Meeting of Stockholders (the “2014 Proxy Statement”), which will be filed by the registrant on or prior to 120 days following the end of the registrant’s fiscal year ended December 31, 2013, are incorporated by reference into Part III of this Form 10-K.
TABLE OF CONTENTS
|
|
|
PART I
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PART II
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PART III
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PART IV
|
|
|
|
PART I
Forward-Looking Statements
This annual report contains forward-looking statements that are subject to risks and uncertainties. Forward-looking statements give our current expectations and projections relating to our financial condition, results of operations, plans, objectives, future performance and business. You can identify forward-looking statements by the fact that they do not relate strictly to historical or current facts. These statements may include words such as “anticipate,” “estimate,” “expect,” “forecast,”“project,” “plan,” “intend,” “believe,” “confident,” “may,” “should,” “can have,” “likely,” “future” and other words and terms of similar meaning in connection with any discussion of the timing or nature of future operating or financial performance or other events.
The forward-looking statements contained in this annual report are based on assumptions that we have made in light of our industry experience and on our perceptions of historical trends, current conditions, expected future developments and other factors we believe are appropriate under the circumstances. As you read and consider this report, you should understand that these statements are not guarantees of performance or results. They involve risks, uncertainties (some of which are beyond our control) and assumptions. Although we believe that these forward-looking statements are based on reasonable assumptions, you should be aware that many factors could affect our actual financial results and cause them to differ materially from those anticipated in the forward-looking statements. The forward-looking statements contained in this annual report include estimates regarding:
·
|
our business, financial and operating results and future economic performance;
|
·
|
proposed new product and service offerings; and
|
·
|
management's goals, expectations and objectives and other similar expressions concerning matters that are not historical facts.
|
Factors that could affect our actual financial results and cause them to differ materially from those anticipated in the forward-looking statements include:
·
|
demand for our products;
|
·
|
frequency and duration of major power outages;
|
·
|
availability, cost and quality of raw materials and key components used in producing our products;
|
·
|
the impact on our results of the substantial increases in our outstanding indebtedness and related interest expense due to the dividend recapitalization transactions completed in May 2012 and 2013;
|
·
|
the possibility that the expected synergies, efficiencies and cost savings of our acquisitions will not be realized, or will not be realized within the expected time period;
|
·
|
the risk that our acquisitions will not be integrated successfully;
|
·
|
difficulties we may encounter as our business expands globally;
|
·
|
competitive factors in the industry in which we operate;
|
·
|
our dependence on our distribution network;
|
·
|
our ability to invest in, develop or adapt to changing technologies and manufacturing techniques;
|
·
|
loss of our key management and employees;
|
·
|
increase in product and other liability claims; and
|
·
|
changes in environmental, health and safety laws and regulations.
|
Should one or more of these risks or uncertainties materialize, or should any of these assumptions prove incorrect, our actual results may vary in material respects from those projected in any forward-looking statements. A detailed discussion of these and other factors that may affect future results is contained in Item 1A of this Annual Report on Form 10-K.
Any forward-looking statement made by us in this report speaks only as of the date on which we make it. Factors or events that could cause our actual results to differ may emerge from time to time, and it is not possible for us to predict all of them. We undertake no obligation to update any forward-looking statement, whether as a result of new information, future developments or otherwise, except as may be required by law.
We are a leading designer and manufacturer of a wide range of power generation equipment and other engine powered products serving the residential, light commercial, industrial and construction markets. Power generation is our main focus, which differentiates us from our primary competitors that also have broad operations outside of the generator market. As the only significant market participant focused predominantly on these products, we have one of the leading market positions in the power equipment market in North America and an expanding presence internationally. We believe we have one of the widest range of products in the marketplace, including residential, commercial and industrial standby generators, as well as portable and mobile generators used in a variety of applications. Other engine powered products that we design and manufacture include light towers which provide temporary lighting for various end markets and a broad product line of power washers for residential and commercial use.
We design, manufacture, source and modify engines, alternators, transfer switches and other components necessary for our products, which are fueled by natural gas, liquid propane, gasoline, diesel and Bi-Fuel™. Our products are available primarily across the U.S and Canada, with an expanding presence internationally in the Latin America, Europe, Middle East, Africa and Asia/Pacific regions. Products are sold into these regions through a broad network of independent dealers, retailers, wholesalers and equipment rental companies under the Generac®, Magnum™, Ottomotores and Tower Light brand names. We also sell direct to certain national and regional account customers that are the end users of our products.
We have a significant market share in the residential and light commercial generator markets, which we believe are currently under penetrated. We believe that our leading market position is largely attributable to our strategy of providing a broad product line of high-quality, innovative and affordable products through our extensive and multi-layered distribution network. In addition, through recent acquisitions, we are also a leading provider of light towers and mobile generators, as well as a supplier of industrial diesel generators ranging in sizes up to 3,250kW.
Generac Holdings Inc. is a Delaware corporation whose principal operating subsidiary is Generac Power Systems, Inc., or Generac Power Systems (collectively Generac). Generac Power Systems was founded in 1959 to market a line of affordable portable generators that offered superior performance and features. Through innovation and focus, we have grown to be a leading provider of power generation equipment to the residential, commercial, industrial, and construction markets.
Key events in our history include the following:
-
|
In 1980, we expanded beyond portable generators into the industrial market with the introduction of our first stationary generators that provided up to 200 kW of power output.
|
-
|
We introduced our first residential standby generator in 1989, and expanded our product development and global distribution system in the 1990s, forming a series of alliances that tripled our higher output generator sales.
|
-
|
In 1998, we sold our Generac® portable products business (which included portable generator and pressure washer product lines) to a private equity firm who eventually sold this business to another company.
|
-
|
Our growth accelerated in 2000 as we expanded our residential automatic standby generator product offering, implemented our multi-layered distribution philosophy, and introduced our quiet-running QT Series generators in 2005, accelerating our penetration in the commercial market.
|
-
|
In 2006, the founder of Generac Power Systems sold the company to affiliates of CCMP Capital Advisors, LLC or CCMP, together with certain other investors and members of our management (CCMP Transaction).
|
-
|
In 2008, we successfully expanded our position in the portable generator market after the expiration of our non-compete agreement that was entered into when we sold our Generac® portable products business in 1998.
|
-
|
In February 2010, we completed our initial public offering (IPO) of 20.7 million primary shares of our common stock (including additional share allotment).
|
-
|
In early 2011, we re-entered the market for gasoline-powered pressure washers (or power washers), which we previously exited in 1998 with the sale of our Generac® portable products business.
|
-
|
In October 2011, we purchased substantially all the assets of the Magnum Products business (Magnum or Magnum Products) which is the number one light tower manufacturer in the U.S. and has a growing share of the mobile generator market.
|
-
|
In December 2012, we purchased all of the equity of Ottomotores UK Limited and its affiliates (Ottomotores) which is one of the largest manufacturers of industrial generators in Mexico.
|
-
|
In August 2013, we purchased all of the equity of Tower Light Srl and its wholly-owned subsidiaries (Tower Light) which is a leading developer and supplier of mobile light towers throughout Europe, the Middle East and Africa.
|
-
|
In August 2013, CCMP completed the last of a series of sale transactions that began in November 2012 by which it sold substantially all of the shares of common stock that it owned as of the initial public offering.
|
-
|
In November 2013, we purchased substantially all the assets of the generator division of Baldor Electric Company, a wholly-owned subsidiary of ABB Group (Baldor Generators), which offers a complete line of standby and prime rated products ranging from 3kW up to 2,500kW throughout the US. And Canada.
|
Today, we manufacture a full line of power products for a wide variety of applications and markets. We have demonstrated a long track record of achieving significant revenue growth through product innovation, expanded distribution and increased awareness of our products. We have experienced organic revenue growth of nearly 20% during the past 10 years on a compounded annual basis. Our success is built on engineering expertise, manufacturing & sourcing excellence and our innovative approaches to the market.
Products
We design and manufacture stationary, portable and mobile generators with single-engine outputs ranging between 800W and up to 3,250kW, with the ability to expand the power range for certain stationary generator solutions to much larger multi-megawatt systems through our Modular Power Systems, an integrated paralleling configuration. Other engine powered products that we design and manufacture include light towers, power washers and pumps. We classify our products into three classes based on similar range of power output geared for varying end customer uses: Residential power products, Commercial & Industrial power products; and Other products. The following summary outlines our portfolio of products, including their key attributes and customer applications.
Residential power products
Our residential automatic standby generators range in output from 6kW to 60kW, with manufacturer's suggested retail prices, or MSRPs, from approximately $1,900 to $16,700. These products operate on natural gas, liquid propane or diesel and are permanently installed with an automatic transfer switch, which we also manufacture. Air-cooled engine residential standby generators range in outputs from 6kW to 20kW, are available in steel and aluminum enclosures and serve as an emergency backup for small to medium-sized homes. Liquid-cooled engine generators serve as emergency backup for larger homes and small businesses and range in output from 22kW to 60kW. Liquid-cooled brands include the Guardian® Series and the premium Quietsource® Series, which have a quiet, low-speed engine and a standard aluminum enclosure.
In late 2013, we introduced a line of compact diesel generators developed specifically for residential and light-commercial users called Protector® Series, which offers the industry’s smallest and most compact footprint at price points well below those of larger, more traditional diesel generator sets in the marketplace.
Also during 2013, we introduced a new cellular remote monitoring system for home standby generators called Mobile Link™, which allows our customers to check the status of their generator conveniently from a desktop PC, tablet computer or mobile phone and also provides the capability to receive maintenance or service alerts.
We provide portable generators that are fueled predominantly by gasoline that range in size from 800W to 17,500W. These products serve as an emergency home backup and are also used for construction and recreational purposes. We currently have five portable product lines: the GP series, targeted at homeowners, ranging from 1,800W to 17,500W; the LP series, that runs on propane and is also targeted at homeowners, ranging from 3,250W to 5,500W; the XG series, targeted at the premium homeowner markets, ranging from 4,000 to 10,000W; the XP series, targeted at the professional contractor market, ranging from 3,600 to 10,000W; and the iX series, targeted at the recreational market, ranging from 800W to 2,000W. In addition, we offer manual transfer switches to supplement our portable generator product offering.
We also provide a broad product line of engine driven power washers, which are also fueled by gasoline, that range in PSI from 2,000 to 4,000 that are used for residential and commercial use.
Residential power products comprised 56.8%, 60.0% and 62.0%, respectively, of total net sales in 2013, 2012 and 2011.
Commercial & Industrial power products
We offer a full line of commercial & industrial generators fueled by diesel, natural gas, liquid propane and Bi-Fuel™. Ranging from 22kW up to 3,250kW, we believe we have one of the broadest product offerings in the industry.
Our light-commercial standby generators include a full range of affordable systems from 22kW to 150kW and related transfer switches, providing three-phase power sufficient for most small and mid-sized businesses including grocery stores, convenience stores, restaurants, gas stations, pharmacies, retail banks and small health care facilities. Our light-commercial generators run on natural gas and liquid propane, and in late 2013 we introduced a product line of compact, diesel-fueled generators called Protector® Series.
We also manufacture a broad line of standard and configured standby generators and related transfer switches for industrial applications. Our single-engine industrial generators range in output from 10kW up to 3,250kW with our Modular Power System (MPS) technology extending our product range up to much larger multi-megawatt systems through an integrated paralleling configuration. We offer four fuel options for our industrial generators, including diesel, natural gas, liquid propane or Bi-Fuel™. Bi-Fuel™ generators operate on a combination of both diesel and natural gas to allow our customers the advantage of multiple fuel sources and extended run times. Our industrial generators are primarily used as emergency backup for large healthcare, telecom, datacom, commercial office, municipal and manufacturing customers.
The acquisition of Baldor Generators in November 2013 enables us, for the first time, to offer single-engine industrial generators larger than 600kW within the U.S. and Canada. The Baldor Generators product offering includes stationary and containerized packages up to 2,500kW that can be used in standby applications and in certain configurations in prime power applications. The addition of these products significantly expands our industrial product offering and the addressable domestic market that our distribution partners can serve.
Our MPS technology combines the power of several smaller generators to produce the output of a larger generator, providing our customers with redundancy and scalability in a cost-effective manner. For larger industrial applications, our MPS products offer customers an efficient, affordable way to scale their standby power needs. The MPS product line also offers superior reliability given its built-in redundancy which allows individual units to be taken off-line for routine maintenance while retaining coverage for critical circuits.
Our light towers and mobile generators provide temporary lighting and power for various end markets, such as road and commercial construction, energy, mining, military and special events. We also manufacture mobile pumps which utilize wet and dry-priming pump systems for a wide variety of wastewater applications. The acquisition of Tower Light in August 2013 provides us an expanded product offering of light towers to support additional geographic markets, allowing us to participate in the growing rental market outside the U.S.
Commercial & Industrial power products comprised 38.4%, 34.9% and 31.6% respectively, of total net sales in 2013, 2012 and 2011.
Other power products
We sell aftermarket service parts to our dealers and proprietary engines to third-party original equipment manufacturers, or OEMs.
Other power products comprised 4.8%, 5.1% and 6.4%, respectively, of total net sales in 2013, 2012 and 2011.
Distribution channels and customers
We distribute our products through several channels to increase awareness of our product categories and the Generac®, Magnum®, OttomotoresTM and Tower LightTM brands, and to ensure our products reach a broad customer base. This distribution network includes independent residential and industrial dealers, national retailers, e-commerce merchants, electrical wholesalers (including certain private label arrangements), catalogs, equipment rental companies and equipment dealers. We also sell direct to certain national account customers that are the end users of our products.
We believe our distribution network is a competitive advantage that has strengthened over the last decade as a result of adding and expanding the various distribution channels through which we sell our products. Our network is well balanced with no customer providing more than 6% of our sales in 2013.
Our overall dealer network, which is located principally in the United States, Canada and Latin America, is the industry's largest network of factory direct independent generator contractors. In addition, the acquisition of Tower Light in August 2013 provides access to numerous independent distributors in over 50 countries.
Our residential/commercial dealer network sells, installs and services our residential and light-commercial products to end users. We have increased our level of investment in recent years by focusing on a variety of initiatives to more effectively market and sell our home standby products and better align our dealer network with Generac.
Our industrial dealer network provides industrial and commercial end users with ongoing sales and product support. Our industrial dealers maintain the local relationships with commercial electrical contractors, specifying engineers and national account regional buying offices. In recent years, we have been particularly focused on expanding our dealer network in Latin America and other regions of the world in order to expand our international sales opportunities.
Our retail distribution network includes thousands of locations and includes regional and national home improvement chains, retailers, clubs, buying groups and farm supply stores. These physical retail locations are supplemented by a number of catalogue and e-commerce retailers. This network primarily sells our residential standby, portable and light-commercial generators as well as our power washers.
Our wholesaler network distributes our residential and light-commercial generators and consists of selling branches of both national and local distribution houses for electrical and HVAC products.
On a selective basis, we have established private label and licensing arrangements with third party partners to provide residential, light-commercial and industrial generators. These partners include leading home equipment, electrical equipment and construction machinery companies, each of which provides access to incremental channels of distribution for our products.
The distribution for our mobile products includes international, national and regional equipment rental companies, equipment dealers and construction companies, which primarily serve non-residential building construction, road construction and energy markets.
We sell direct to certain national account customers that are the end users of our products covering a number of end market verticals, including telecommunication, retail, banking, convenience stores, and other light commercial applications.
Additionally, we sell certain engines directly to OEM manufacturers and after-market dealers for use in the lawn, garden and rental markets.
Business strategy
We believe our growth over the last several years is due in part to the development and execution of our "Powering Ahead” strategy. Since shortly after our initial public offering in 2010, this strategic plan has served as the framework for the significant investments we have made to drive the growth of Generac. As we continue to move the Powering Ahead plan into the future, we are focused on a number of initiatives that are driven by the same four key objectives:
Growing the residential standby generator market. As the leader in the home standby generator category, it is incumbent upon us to continue to drive growth and increase the penetration rate of these products in households across the United States. Central to this strategy is to increase the awareness, availability and affordability of home standby generators. Ongoing power outage activity, combined with expanding our dealer base and overall distribution in affected regions, are key drivers in elevating the awareness of home standby generators over the long term. We intend to continue to supplement these key growth drivers with targeted sales and marketing initiatives to further extend the awareness of home standby generators. In addition, we intend to continue to focus on innovation in this emerging product category and introduce new products into the marketplace. With only approximately 3.0% penetration of the addressable market of U.S. homes (which we define as single-family detached, owner-occupied households with a home value of over $100,000, as defined by the U.S. Census Bureau's 2011 American Housing Survey for the United States), we believe there are opportunities to further penetrate the residential standby generator market.
Gaining commercial and industrial market share. Our growth strategy for commercial and industrial power generation products is focused on incremental market share gains. Key to this objective are our efforts to develop and improve our industrial distribution, increase our addressable market with new products and increase the rate at which our products are specified in C&I power generation applications. In addition, we will attempt to garner incremental market share through our leading position in the growing market for cleaner burning, more cost effective natural gas fueled back-up power solutions. While still a much smaller portion of the overall C&I market, we believe demand for these products continues to increase at a faster rate than traditional diesel fueled generators as a result of their lower capital and operating costs. We also believe there is an opportunity to provide smaller, more cost effective generators marketed aggressively towards the underpenetrated “optional” standby market which includes smaller footprint commercial buildings. With our scale in these smaller commercial products, our distribution capabilities, and our national account customer focus, we believe we have an opportunity to penetrate these markets by using a targeted marketing approach and funneling opportunities to our distribution partners.
Diversifying end markets by expanding product offerings and services. In recent years, we have worked hard to diversify Generac's end markets with new products and services. Much of this diversification has been achieved with our strategic acquisitions over the last three years. We now have access to several new products, new markets and new customers through the purchase of the Magnum Products business in October 2011, the Ottomotores businesses in December 2012, Tower Light in August 2013 and Baldor Generators in November 2013. As a result of these acquisitions, we now have access to a broad lineup of mobile power products, as well as products that serve the oil & gas and other infrastructure power markets. Additionally, our re-entry into the market for power washers in 2011 provides us with an opportunity to further diversify our company with the addition of this platform. As we continue to build upon our recent diversification efforts, we intend to evaluate other products and services which we believe could further diversify our end markets.
Expanding into new geographies. During 2013, approximately 8% of our revenues were shipped to regions outside the U.S. and Canada. Given that the global market for power generation equipment is estimated to exceed $15 billion annually, we believe there are growth opportunities for Generac by expanding into new geographies. Prior to 2013, these efforts had been mostly organic with the creation of a dedicated sales team and the addition of over 100 new distribution points around the globe, with many of those in Latin America. The acquisitions of the Ottomotores and Tower Light businesses provide us with an enhanced platform and immediate scale for our international growth initiatives and accelerates our efforts to become a more global player in the markets for backup power and mobile power equipment. As we look forward, we intend to leverage these recent acquisitions while also evaluating other opportunities to expand into other regions of the world.
We believe the investments we have made to date, due in part to our Powering Ahead strategy, have helped to capitalize on the macro, secular growth drivers for our business and are an important part of our efforts to diversify and globalize our business. See “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Business drivers and trends” for additional drivers that influence demand for our products and other trends affecting the markets that we serve.
We operate several manufacturing plants located principally in Wisconsin (USA), Mexico, Italy and Brazil totaling over three million square feet. We also maintain inventory warehouses in the United States that accommodate material storage and rapid response requirements of our customers.
In recent years, we have added manufacturing capacity through investments in automation, improved utilization and the expansion of our manufacturing footprint through organic means as well as through acquisitions. We believe we have sufficient capacity to achieve our business goals for the near-to-intermediate term.
Our primary focus on generators and engine powered equipment drives technological innovation, specialized engineering and manufacturing competencies. Research and development is a core competency and includes a staff of over 250 engineers working on numerous active projects. Our sponsored research and development expense was $29.3 million, $23.5 million and $16.5 million for the years ended December 2013, 2012 and 2011, respectively. Research and development is conducted at each of our manufacturing facilities and additionally at our technical center in Suzhou, China with dedicated teams for each product line. Research and development is focused on developing new technologies and product enhancements as well as maintaining product competitiveness by improving manufacturing costs, safety characteristics, reliability and performance while ensuring compliance with regulatory standards. We have over 30 years of experience using natural gas engines and have developed specific expertise with fuel systems and emissions technology. In the residential and light commercial markets, we have developed proprietary engines, cooling packages, controls, fuel systems and emissions systems. We believe that our expertise in engine powered equipment gives us the capability to develop new products that will allow continued diversification in our end markets.
Intellectual property
We rely on a combination of patents and trademarks to establish and protect our proprietary rights. Our commitment to research and development has resulted in a portfolio of over 100 U.S. and international patents and patent applications. Our patents expire between 2016 and 2030 and protect certain features and technologies we have developed for use in our products including fuel systems, air flow, electronics and controls, noise reduction and air-cooled engines. New U.S. patents that are issued generally have a life of 20 years from the date the patent application is initially filed. U.S. and international trademark registrations generally have a perpetual duration if they are properly maintained and renewed. We believe the existence of these patents and trademarks, along with our ongoing processes to register additional patents and trademarks, protect our intellectual property rights and enhance our competitive position. We also use proprietary manufacturing processes that require customized equipment.
Suppliers of raw materials
Our primary raw material inputs are steel, copper and aluminum, all of which are purchased from third parties and, in many cases, as part of machined or manufactured components. We have developed an extensive network of reliable, low-cost suppliers in the United States and abroad. Our strategic global sourcing function continuously evaluates the cost structure of our products and assesses the capabilities of our supply chain. Components are sourced accordingly based on this evaluation. Our supplier quality engineers conduct on-site audits of major supply chain partners and help to maintain the reliability of critical sourced components. In 2013, we sourced approximately 60% of our materials and components from outside the United States.
Competition
The market for power generation equipment is competitive. We face competition from a variety of large diversified industrial companies as well as smaller generator manufacturers abroad. However, most of the traditional participants in the generator market compete on a more specialized basis, focused on specific applications within their larger diversified product mix. We are the only significant market participant focused predominantly on standby, portable and mobile generators with broad capabilities across the residential, light commercial, industrial and construction generator markets. We believe that our engineering capabilities and core focus on generators provide us with manufacturing flexibility and enable us to maintain a first-mover advantage over our competition for product innovation. We also believe our broad product offering and diverse distribution model provide for additional advantages as well.
A summary of the primary competitors across our main product classes are as follows:
Residential standby generators – Kohler, Briggs & Stratton and Cummins (Onan division), each of which also have broad operations in other manufacturing businesses.
Portable generators – Honda, Briggs & Stratton, Pramac and Techtronics International (TTI), along with a number of smaller domestic and foreign competitors.
Power washers – Briggs & Stratton, TTI, FNA Group, Mi-T-M and Karcher.
Standby commercial and industrial generators – Caterpillar, Cummins, Kohler, MTU, most of which focus on the market for diesel generators as they are also diesel engine manufacturers.
Mobile generators – Doosan, Wacker and MultiQuip
Light towers – Terex, Allmand, Wacker and Atlas Copco
There are a number of other standby generator manufacturers and packagers located outside North America, but most supply their products mainly to their respective regional markets. In a continuously evolving sector, we believe our scale and broad capabilities make us well positioned to remain competitive.
We compete primarily on the basis of brand reputation, quality, reliability, pricing, innovative features, breadth of product offering and product availability.
Employees
As of December 31, 2013, we had 3,380 employees (3,032 full time and 348 part-time and temporary employees). Of those, 2,094 employees were directly involved in manufacturing at our manufacturing facilities.
Domestically, we have had an “open shop” bargaining agreement for the past 48 years. The current agreement, which expires October 17, 2016, covers our Waukesha and Eagle, Wisconsin facilities. Additionally, our plants in Mexico, Italy and Brazil are operated under various local or national union groups. Our other facilities are not unionized.
Regulation, including environmental matters
As a manufacturing company, our operations are subject to a variety of foreign, federal, state and local laws and regulations covering environmental, health and safety matters. Applicable laws and regulations include those governing, among other things, emissions to air, discharges to water, noise and employee safety, as well as the generation, handling, storage, transportation, treatment and disposal of waste and other materials. In addition, our products are subject to various laws and regulations relating to, among other things, emissions and fuel requirements, as well as labeling and marketing.
Our products sold in the United States are regulated by the U.S. Environmental Protection Agency (“EPA”), California Air Resources Board (“CARB”) and various other state and local air quality management districts. These governing bodies continue to pass regulations that require us to meet more stringent emission standards, and all of our engines and engine-driven products are regulated within the United States and its territories. Other countries have various degrees of regulation depending upon product application and fuel types. New regulations could require us to redesign our products and could affect market growth for our products.
Segment information
We refer you to Note 2, “Segment Reporting,” of our consolidated financial statements included in Item 8 of this Annual Report on Form 10-K for information about our business segment and geographic areas.
Available Information
The Company’s principal executive offices are located at S45 W29290 Highway 59, Waukesha, Wisconsin, 53189 and the Company’s telephone number is (262) 544-4811. The Company’s annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports are available free of charge through the “Investors” portion of the Company’s web site, www.generac.com, as soon as reasonably practical after they are filed with the Securities and Exchange Commission, or the “SEC”. The SEC maintains a web site, www.sec.gov, which contains reports, proxy and information statements, and other information filed electronically with the SEC by the Company. The information provided on these websites is not part of this report and is therefore not incorporated herein by reference.
Executive officers
The following table sets forth information regarding our executive officers:
Name Age Position
|
Aaron P. Jagdfeld
|
|
42
|
|
President, Chief Executive Officer and Director
|
York A. Ragen
|
|
42
|
|
Chief Financial Officer
|
Terrence J. Dolan
|
|
48
|
|
Executive Vice President, Global Commercial & Industrial Products
|
Russell S. Minick
|
|
53
|
|
Executive Vice President, Global Residential Products
|
Roger F. Pascavis
|
|
53
|
|
Executive Vice President, Strategic Global Supply
|
Allen D. Gillette
|
|
57
|
|
Executive Vice President, Global Engineering
|
Robert Stoppek
|
|
42
|
|
Senior Vice President, Global Operations
|
Clement Feng |
|
50 |
|
Senior Vice President, Marketing |
Aaron P. Jagdfeld has served as our Chief Executive Officer since September 2008 and as a director since November 2006. Prior to becoming Chief Executive Officer, Mr. Jagdfeld worked for Generac for 15 years. He began his career in the finance department in 1994 and became our Chief Financial Officer in 2002. In 2007, he was appointed President and was responsible for sales, marketing, engineering and product development. Prior to joining Generac, Mr. Jagdfeld worked in the audit practice of the Milwaukee, Wisconsin office of Deloitte and Touche. Mr. Jagdfeld holds a Bachelor of Business Administration in Accounting from the University of Wisconsin-Whitewater.
York A. Ragen has served as our Chief Financial Officer since September 2008. Prior to becoming Chief Financial Officer, Mr. Ragen held Director of Finance and Vice President of Finance positions at Generac. Prior to joining Generac in 2005, Mr. Ragen was Vice President, Corporate Controller at APW Ltd., a spin-off from Applied Power Inc., now known as Actuant Corporation. Mr. Ragen began his career in the Audit division of Arthur Andersen's Milwaukee office. Mr. Ragen holds a Bachelor of Business Administration in Accounting from the University of Wisconsin-Whitewater.
Terrence J. Dolan began serving as our Executive Vice President, Industrial Products in October 2011, with this title being expanded in January 2014 to Executive Vice President, Global Commercial & Industrial Products. Prior to becoming Executive Vice President of Industrial Products, he served as our Senior Vice President of Sales from January 2010 to October 2011. Prior to joining Generac, Mr. Dolan was Senior Vice President of Business Development and Marketing at Boart Longyear from 2007 to 2008, Vice President of Sales and Marketing at Ingersoll Rand from 2002 to 2007, and Director of Strategic Accounts at Case Corporation from 1991 to 2001. Mr. Dolan holds a B.A. in Management and Communications from Concordia University.
Russell S. Minick began serving as our Executive Vice President, Residential Products in October 2011, with this title being expanded in January 2014 to Executive Vice President, Global Residential Products. Prior to joining Generac, Mr. Minick was President & CEO of Home Care Products for Electrolux from 2006 to 2011, President of The Gunlocke Company at HNI Corporation from 2003 to 2006, Senior Vice President of Sales, Marketing and Product Development at True Temper Sports from 2002 to 2003, and General Manager of Extended Warranty Operations for Ford Motor Company from 1998 to 2002. Mr. Minick is a graduate of the University of Northern Iowa, and holds a degree in marketing.
Roger Pascavis has served as our Executive Vice President, Strategic Global Supply since March 2013. Prior to becoming Executive Vice President of Strategic Global Supply, he served as the Senior Vice President of Operations since January 2008. Mr. Pascavis joined Generac in 1995 and has served as Director of Materials and Vice President of Operations. Prior to joining Generac, Mr. Pascavis was a Plant Manager for MTI in Waukesha, Wisconsin. Mr. Pascavis holds a B.S. in Industrial Technology from the University of Wisconsin, Stout and an M.B.A. from Lake Forest Graduate School of Management.
Allen D. Gillette is our Executive Vice President of Global Engineering. Mr. Gillette joined Generac in 1998 and has served in numerous engineering positions involving increasing levels of responsibilities and corresponding titles. Prior to joining Generac, Mr. Gillette was Manager of Engineering at Transamerica Delaval Enterprise Division, Chief Engineer—High-Speed Engines at Ajax-Superior Division and Manager of Design & Development, Cooper-Bessemer Reciprocating Products Division. Mr. Gillette holds an M.S. in Mechanical Engineering from Purdue University and a B.S. in Mechanical Engineering from Gonzaga University.
Robert Stoppek has served as our Senior Vice President of Global Operations since March 2013 when he joined Generac. Prior to joining Generac, Mr. Stoppek spent over 16 years at Sauer-Danfoss holding various executive level business positions both domestically and internationally and most recently as Chief Supply Chain Officer-Vice President Global Supply Chain & Procurement with IDEX Corporation. Mr. Stoppek holds an MBA from Northwestern University’s Kellogg School of Business and a Masters in Mechanical Engineering from Iowa State University.
Clement Feng has served as our Senior Vice President of Marketing since August 2013 when he re-joined Generac after three years as Vice President – Global Marketing with the Fluke Corporation. Mr. Feng served as our Senior Vice President of Marketing from 2007 until 2010. Mr. Feng holds a B.S. in Chemical Engineering from Stanford University and an M.B.A. from the University of Chicago- Booth School of Business.
You should carefully consider the following risks. These risks could materially affect our business, results of operations or financial condition, cause the trading price of our common stock to decline materially or cause our actual results to differ materially from those expected or those expressed in any forward-looking statements made by us or on our behalf. These risks are not exclusive, and additional risks to which we are subject include, but are not limited to, the factors mentioned under “Forward-Looking Statements” and the risks of our businesses described elsewhere in this Annual Report.
Risk factors related to our business and industry
Demand for our products is significantly affected by unpredictable major power-outage events that can lead to substantial variations in, and uncertainties regarding, our financial results from period to period.
Sales of our products are subject to consumer buying patterns, and demand for our products is affected by power outage events caused by thunderstorms, hurricanes, ice storms, blackouts and other grid reliability issues. The impact of these outage events on our sales can vary depending on the location and severity of the outages. Sustained periods without major power disruptions can lead to reduced consumer awareness of the benefits of standby and portable generator products and can result in reduced sales growth rates and excess inventory. The lack of major power-outage events can affect our net sales in the years following a given storm season. Unpredictable fluctuations in demand are therefore part of managing our business, and these fluctuations could have an adverse effect on our net sales and profits. Despite their unpredictable nature, we believe major power outages create awareness and accelerate adoption for our home standby products.
Demand for our products is significantly affected by durable goods spending by consumers and businesses and other macroeconomic conditions.
Our business is affected by general economic conditions, and uncertainty or adverse changes such as the prolonged downturn in U.S. residential investment and the impact of more stringent credit standards could lead to a decline in demand for our products and pressure to reduce our prices. Our sales of light-commercial and industrial generators are affected by conditions in the non-residential construction sector and by the capital investment trends for small and large businesses and municipalities. If these businesses and municipalities cannot access credit markets or do not utilize discretionary funds to purchase our products as a result of the economy or other factors, our business could suffer and our ability to realize benefits from our strategy of increasing sales in the light-commercial and industrial sectors through, among other things, our focus on innovation and product development, including natural gas engine and modular technology, could be adversely affected. In addition, consumer confidence and home remodeling expenditures have a significant impact on sales of our residential products, and prolonged periods of weakness in consumer durable goods spending could have a material impact on our business. Typically, we do not have contracts with our customers which call for committed volume, and we cannot guarantee that our current customers will continue to purchase our products. If general economic conditions or consumer confidence were to worsen, or if the non-residential construction sector or rate of capital investments were to decline, our net sales and profits would likely be adversely affected. Additionally, timing of capital spending by our national account customers can vary from quarter-to-quarter based on capital availability and internal capital spending budgets.
Decreases in the availability and quality, or increases in the cost, of raw materials and key components we use could materially reduce our earnings.
The principal raw materials that we use to produce our products are steel, copper and aluminum. We also source a significant number of component parts from third parties that we utilize to manufacture our products. The prices of those raw materials and components are susceptible to significant fluctuations due to trends in supply and demand, transportation costs, government regulations and tariffs, price controls, economic conditions and other unforeseen circumstances beyond our control. We do not have long-term supply contracts in place to ensure the raw materials and components we use are available in necessary amounts or at fixed prices. If we are unable to mitigate raw material or component price increases through product design improvements, price increases to our customers, manufacturing productivity improvements, or hedging transactions, our profitability could be adversely affected. Also, our ability to continue to obtain quality materials and components is subject to the continued reliability and viability of our suppliers, including in some cases, suppliers who are the sole source of certain important components. If we are unable to obtain adequate, cost efficient or timely deliveries of required raw materials and components, we may be unable to manufacture sufficient quantities of products on a timely basis. This could cause us to lose sales, incur additional costs, delay new product introductions or suffer harm to our reputation.
The industry in which we compete is highly competitive, and our failure to compete successfully could adversely affect our results of operations and financial condition.
We operate in markets that are highly competitive. Some of our competitors have established brands and are larger in size or are divisions of large diversified companies and have substantially greater financial resources. Some of our competitors may be willing to reduce prices and accept lower margins in order to compete with us. In addition, we could face new competition from large international or domestic companies with established industrial brands that enter our end markets. Demand for our products may also be affected by our ability to respond to changes in design and functionality, to respond to downward pricing pressure, and to provide shorter lead times for our products than our competitors. If we are unable to respond successfully to these competitive pressures, we could lose market share, which could have an adverse impact on our results. For more information, see “Item 1—Business—Competition.”
Our industry is subject to technological change, and our failure to continue developing new and improved products and to bring these products rapidly to market could have an adverse impact on our business.
New products, or refinements and improvements of existing products, may have technical failures, their introduction may be delayed, they may have higher production costs than originally expected or they may not be accepted by our customers. If we are not able to anticipate, identify, develop and market high quality products in line with technological advancements that respond to changes in customer preferences, demand for our products could decline and our operating results could be adversely affected.
We rely on independent dealers and distribution partners, and the loss of these dealers and distribution partners, or of any of our sales arrangements with significant private label, telecommunications, retail or equipment rental customers, would adversely affect our business.
In addition to our direct sales force and manufacturer sales representatives, we depend on the services of independent distributors and dealers to sell our products and provide service and aftermarket support to our end customers. We also rely upon our distribution channels to drive awareness for our product categories and our brands. In addition, we sell our products to end users through private label arrangements with leading home equipment, electrical equipment and construction machinery companies, arrangements with top retailers and equipment rental companies, and our direct national accounts with telecommunications and industrial customers. Our distribution agreements and any contracts we have with large telecommunications, retail and other customers are typically not exclusive, and many of the distributors and customers with whom we do business offer products and services of our competitors. Impairment of our relationships with our distributors, dealers or large customers, loss of a substantial number of these distributors or dealers or of one or more large customers, or an increase in our distributors' or dealers' sales of our competitors' products to our customers or of our large customers' purchases of our competitors' products could materially reduce our sales and profits. Also, our ability to successfully realize our growth strategy is dependent in part on our ability to identify, attract and retain new distributors at all layers of our distribution platform, and we cannot be certain that we will be successful in these efforts.
Our business could be negatively impacted if we fail to adequately protect our intellectual property rights or if third parties claim that we are in violation of their intellectual property rights.
We view our intellectual property rights as very important assets. We seek to protect our intellectual property rights through a combination of patent, trademark, copyright and trade secret laws, as well as licensing and confidentiality agreements. These protections may not be adequate to prevent third parties from using our intellectual property without our authorization, breaching any confidentiality agreements with us, copying or reverse engineering our products, or developing and marketing products that are substantially equivalent to or superior to our own. The unauthorized use of our intellectual property by others could reduce our competitive advantage and harm our business. Not only are intellectual property-related proceedings burdensome and costly, but they could span years to get a conclusion and we may not prevail. We cannot guarantee that any patents, issued or pending, will provide us with any competitive advantage or will not be challenged by third parties. Moreover, the expiration of our patents may lead to increased competition with respect to certain products.
In addition, we cannot be certain that we do not or will not infringe third parties' intellectual property rights. Any such claim, even if it is without merit, may be expensive and time-consuming to defend, subject us to damages, cause us to cease making, using or selling certain products that incorporate the disputed intellectual property, require us to redesign our products, divert management time and attention and/or require us to enter into costly royalty or licensing arrangements. Furthermore, in connection with our sale of Generac Portable Products to a private equity firm in 1998, we granted the private equity firm an exclusive perpetual license for the use of the “Generac Portable Products” trademark in connection with the manufacture and sale of certain engine driven consumer products. This perpetual license was eventually transferred to another company when the private equity firm sold that business. Currently, this trademark is not being used in commerce and, as such, there is a rebuttable presumption that the trademark has been abandoned. However, in the event that this trademark is used in the future, we could suffer competitive confusion and our business could be negatively impacted.
Our operations are subject to various environmental, health and safety laws and regulations, and non-compliance with or liabilities under such laws and regulations could result in substantial costs, fines, sanctions and claims.
Our operations are subject to a variety of foreign, federal, state and local environmental, health and safety laws and regulations including those governing, among other things, emissions to air, discharges to water, noise, the generation, handling, storage, transportation, treatment and disposal of waste and other materials. In addition, under federal and state environmental laws, we could be required to investigate, remediate and/or monitor the effects of the release or disposal of materials both at sites associated with past and present operations and at third-party sites where wastes generated by our operations were disposed. This liability may be imposed retroactively and whether or not we caused, or had any knowledge of, the existence of these materials and may result in our paying more than our fair share of the related costs. Violations of or liabilities under such laws and regulations could result in substantial costs, fines and civil or criminal proceedings or personal injury and workers' compensation claims.
Our products are subject to substantial government regulation.
Our products are subject to extensive statutory and regulatory requirements governing, among other things, emissions and noise, including standards imposed by the federal Environmental Protection Agency (“EPA”), state regulatory agencies, such as California Air Resources Board (“CARB”), and other regulatory agencies around the world. These laws are constantly evolving and many are becoming increasingly stringent. Changes in applicable laws or regulations, or in the enforcement thereof, could require us to redesign our products and could adversely affect our business or financial condition in the future. Developing and marketing products to meet such new requirements could result in substantial additional costs that may be difficult to recover in some markets. In some cases, we may be required to modify our products or develop new products to comply with new regulations, particularly those relating to air emissions. For example, we were required to modify our spark-ignited air-cooled gaseous engines to comply with the 2011 EPA and CARB regulations, as well as the continued implementation of Tier 4 nonroad diesel engine changes associated with acquisitions serving the mobile product markets. Typically, additional costs associated with significant compliance modifications are passed on to the market. While we have been able to meet previous deadlines, failure to comply with other existing and future regulatory standards could adversely affect our position in the markets we serve.
We may incur costs and liabilities as a result of product liability claims.
We face a risk of exposure to product liability claims in the event that the use of our products is alleged to have resulted in injury or other damage. Although we currently maintain product liability insurance coverage, we may not be able to obtain such insurance on acceptable terms in the future, if at all, or obtain insurance that will provide adequate coverage against potential claims. Product liability claims can be expensive to defend and can divert the attention of management and other personnel for long periods of time, regardless of the ultimate outcome. A significant unsuccessful product liability defense could have a material adverse effect on our financial condition and results of operations. In addition, we believe our business depends on the strong brand reputation we have developed. If our reputation is damaged, we may face difficulty in maintaining our market share and pricing with respect to some of our products, which could reduce our sales and profitability.
The loss of any key members of our senior management team or key employees could disrupt our operations and harm our business.
Our success depends, in part, on the efforts of certain key individuals, including the members of our senior management team, who have significant experience in the power products industry. If, for any reason, our senior executives do not continue to be active in management, or if our key employees leave our company, our business, financial condition or results of operations could be adversely affected. Failure to continue to attract these individuals at reasonable compensation levels could have a material adverse effect on our business, liquidity and results of operations. Although we do not anticipate that we will have to replace any of these individuals in the near future, the loss of the services of any of our key employees could disrupt our operations and have a material adverse effect on our business.
Disruptions caused by labor disputes or organized labor activities could harm our business.
We may from time to time experience union organizing activities in our non-union facilities. Disputes with the current labor union or new union organizing activities could lead to work slowdowns or stoppages and make it difficult or impossible for us to meet scheduled delivery times for product shipments to our customers, which could result in loss of business. In addition, union activity could result in higher labor costs, which could harm our financial condition, results of operations and competitive position.
We may experience material disruptions to our manufacturing operations.
While we seek to operate our facilities in compliance with applicable rules and regulations and take measures to minimize the risks of disruption at our facilities, a material disruption at one of our manufacturing facilities could prevent us from meeting customer demand, reduce our sales and/or negatively impact our financial results. Any of our manufacturing facilities, or any of our equipment within an otherwise operational facility, could cease operations unexpectedly due to a number of events, including:
·
|
equipment or information technology infrastructure failure;
|
·
|
disruptions in the transportation infrastructure including roads, bridges, railroad tracks;
|
·
|
fires, floods, tornados, earthquakes, or other catastrophes; and
|
·
|
other operational problems.
|
In addition, the majority of our manufacturing and production facilities are located in Wisconsin within a 100-mile radius. We could experience prolonged periods of reduced production due to unforeseen events occurring in or around our manufacturing facilities in Wisconsin. In the event of a business interruption at our facilities, in particular our Wisconsin facilities, we may be unable to shift manufacturing capabilities to alternate locations, accept materials from suppliers or meet customer shipment needs, among other severe consequences. Such an event could have a material and adverse impact on our financial condition and results of our operations.
A significant portion of our purchased components are sourced in foreign countries, exposing us to additional risks that may not exist in the United States.
We source a significant portion of our purchased components overseas, primarily in Asia and Europe. Our international sourcing subjects us to a number of potential risks in addition to the risks associated with third-party sourcing generally. Such risks include:
·
|
inflation or changes in political and economic conditions;
|
·
|
unstable regulatory environments;
|
·
|
changes in import and export duties;
|
·
|
domestic and foreign customs and tariffs;
|
·
|
currency rate fluctuations;
|
·
|
logistical and communications challenges; and
|
·
|
other restraints and burdensome taxes.
|
These factors may have an adverse effect on our ability to efficiently and cost effectively source our purchased components overseas. In particular, if the U.S. dollar were to depreciate significantly against the currencies in which we purchase raw materials from foreign suppliers, our cost of goods sold could increase materially, which would adversely affect our results of operations.
We are vulnerable to supply disruptions from single-sourced suppliers.
We single-sourced certain types of parts in our product designs during 2013. Any delay in our suppliers’ deliveries may impair our ability to deliver products to our customers. A wide variety of factors could cause such delays including, but not limited to, lack of capacity, economic downturns, availability of credit, weather events or natural disasters.
As a U.S. corporation that conducts business in a variety of foreign countries including, but not limited to, Mexico, Italy and Brazil, we are subject to the Foreign Corrupt Practices Act and a variety of anti-corruption laws worldwide. A determination that we violated any of these laws may affect our business and operations adversely.
As a U.S. corporation that conducts business in a variety of foreign countries including, but not limited to, Mexico, Italy and Brazil, we are subject to the regulations imposed by a variety of anti-corruption laws worldwide. The U.S. Foreign Corrupt Practices Act, or the FCPA, generally prohibits U.S. companies and their intermediaries from making improper payments to foreign officials for the purpose of obtaining or keeping business. The United Kingdom Bribery Act, or the UKBA, prohibits domestic and foreign bribery of the private sector as well as public officials. Any determination that we have violated any anti-corruption laws could have a material adverse effect on our financial position, operating results and cash flows.
Our total assets include goodwill and other indefinite-lived intangibles. If we determine these have become impaired in the future, net income could be materially adversely affected.
Goodwill represents the excess of cost over the fair market value of net assets acquired in business combinations. Indefinite-lived intangibles are comprised of certain trade names. At December 31, 2013, goodwill and other indefinite-lived intangibles totaled $891.1 million, most of which arose from the CCMP Transaction. We review goodwill and other intangibles at least annually for impairment and any excess in carrying value over the estimated fair value is charged to the statement of operations. A reduction in net income resulting from the write-down or impairment of goodwill or indefinite-lived intangibles could have a material adverse effect on our financial statements.
Goodwill and identifiable intangible assets are recorded at fair value on the date of acquisition. In accordance with FASB Accounting Standards Codification (ASC) Topic 350-20, goodwill and indefinite lived intangibles are reviewed at least annually for impairment and definite-lived intangible assets are reviewed for impairment whenever events or changes in circumstances indicate that their carrying value may not be recoverable. Future impairment may result from, among other things, deterioration in the performance of an acquired business or product line, adverse market conditions and changes in the competitive landscape, adverse changes in applicable laws or regulations, including changes that restrict the activities of an acquired business or product line, and a variety of other circumstances. The amount of any impairment is recorded as a charge to the statement of operations. We may never realize the full value of our intangible assets. Any future determination requiring the write-off of a significant portion of intangible assets would have an adverse effect on our financial condition and results of operations. See “Item 7—Management's Discussion and Analysis of Financial Condition and Results of Operations” for details.
We may need additional capital to finance our growth strategy or to refinance our existing credit facilities, and we may not be able to obtain it on acceptable terms, or at all, which may limit our ability to grow.
We may require additional financing to expand our business. Financing may not be available to us or may be available to us only on terms that are not favorable. The terms of our senior secured credit facilities limit our ability to incur additional debt. In addition, economic conditions, including a downturn in the credit markets, could impact our ability to finance our growth on acceptable terms or at all. If we are unable to raise additional funds or obtain capital on acceptable terms, we may have to delay, modify or abandon some or all of our growth strategies. On May 31, 2013, we amended and restated our term loan credit agreement, pursuant to which we incurred $1,200 million of a senior secured term loan to replace our prior $900 million term loan facility. Following the refinancing, we used the available proceeds from the new term loan and cash on hand to fund a special cash dividend to our stockholders of $5.00 per share and to pay related financing fees and expenses. In the future, if we are unable to refinance such facilities on acceptable terms, our liquidity could be adversely affected.
We are unable to determine the specific impact of changes in selling prices or changes in volumes of our products on our net sales.
Because of the wide range of products that we sell, the level of customization for many of our products, the frequent rollout of new products and the fact that we do not apply pricing changes uniformly across our entire portfolio of products, we are unable to determine with specificity the effect of volume changes or changes in selling prices on our net sales.
We may not realize all of the anticipated benefits of our acquisitions or those benefits may take longer to realize than expected. We may also encounter significant unexpected difficulties in integrating acquired businesses.
Our ability to realize the anticipated benefits of our acquisitions will depend, to a large extent, on our ability to integrate the acquired businesses with our business. The combination of independent businesses is a complex, costly and time-consuming process. Further, integrating and managing businesses with international operations may pose challenges not previously experienced by our management. As a result, we will be required to devote significant management attention and resources to integrating the business practices and operations of any acquired businesses with ours. The integration process may disrupt our business and, if implemented ineffectively, would preclude realization of the full benefits expected by us. Our failure to meet the challenges involved in integrating an acquired business into our existing operations or otherwise to realize the anticipated benefits of the transaction could cause an interruption of, or a loss of momentum in, our activities and could adversely affect our results of operations.
In addition, the overall integration of our acquired businesses may result in material unanticipated problems, expenses, liabilities, competitive responses, loss of customer relationships, and diversion of management's attention, and may cause our stock price to decline.
The difficulties of combining the operations of acquired businesses with ours include, among others:
·
|
managing a larger company;
|
·
|
maintaining employee morale and retaining key management and other employees;
|
·
|
integrating two business cultures, which may prove to be incompatible;
|
·
|
the possibility of faulty assumptions underlying expectations regarding the integration process;
|
·
|
retaining existing customers and attracting new customers;
|
·
|
consolidating corporate and administrative infrastructures and eliminating duplicative operations;
|
·
|
the diversion of management's attention from ongoing business concerns and performance shortfalls as a result of the diversion of management's attention to the acquisition;
|
·
|
unanticipated issues in integrating information technology, communications and other systems;
|
·
|
unanticipated changes in applicable laws and regulations;
|
·
|
managing tax costs or inefficiencies associated with integrating the operations of the combined company;
|
·
|
unforeseen expenses or delays associated with the acquisition;
|
·
|
difficulty comparing financial reports due to differing financial and/or internal reporting systems; and
|
·
|
making any necessary modifications to internal financial control standards to comply with the Sarbanes-Oxley Act of 2002 and the rules and regulations promulgated thereunder.
|
Many of these factors will be outside of our control and any one of them could result in increased costs, decreases in the amount of expected revenues and diversion of management's time and energy, which could materially impact our business, financial condition and results of operations. In addition, even if the operations of our acquired businesses are integrated successfully with our operations, we may not realize the full benefits of the transaction, including the synergies, cost savings or sales or growth opportunities that we expect. These benefits may not be achieved within the anticipated time frame, or at all. Or, additional unanticipated costs may be incurred in the integration of our businesses. All of these factors could cause dilution to our earnings per share, decrease or delay the expected accretive effect of the acquisition, and cause a decrease in the price of our common stock. As a result, we cannot assure you that the combination of our acquisitions with our business will result in the realization of the full benefits anticipated from the transaction.
Risks related to our common stock
If securities or industry analysts do not publish research or reports about our business, if they adversely change their recommendations regarding our common stock or if our results of operations do not meet their expectations, our common stock price and trading volume could decline.
The trading market for our common stock will be influenced by the research and reports that industry or securities analysts publish about us or our business. If one or more of these analysts cease coverage of our company or fail to publish reports on us regularly, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline. Moreover, if one or more of the analysts who cover us downgrade recommendations regarding our stock, or if our results of operations do not meet their expectations, our stock price could decline and such decline could be material.
Anti-takeover provisions in our amended and restated certificate of incorporation and by-laws could prohibit a change of control that our stockholders may favor and could negatively affect our stock price.
Provisions in our amended and restated certificate of incorporation and by-laws may make it more difficult and expensive for a third party to acquire control of us even if a change of control would be beneficial to the interests of our stockholders. These provisions could discourage potential takeover attempts and could adversely affect the market price of our common stock. These provisions may also prevent or frustrate attempts by our stockholders to replace or remove our management. For example, our amended and restated certificate of incorporation and by-laws:
·
|
permit our board of directors to issue preferred stock with such terms as they determine, without stockholder approval;
|
·
|
provide that only one-third of the members of the board are elected at each stockholders meeting and prohibit removal without cause;
|
·
|
require advance notice for stockholder proposals and director nominations; and
|
·
|
contain limitations on convening stockholder meetings.
|
These provisions make it more difficult for stockholders or potential acquirers to acquire us without negotiation and could discourage potential takeover attempts and could adversely affect the market price of our common stock.
We do not anticipate paying dividends on our common stock in the foreseeable future.
While we declared a special dividend in both June 2012 and June 2013, we do not anticipate paying any further dividends in the foreseeable future on our common stock. We intend to retain all future earnings for the operation and expansion of our business and the repayment of outstanding debt. In addition, the terms of our senior secured credit facilities limit our ability to pay dividends on our common stock. As a result, capital appreciation, if any, of our common stock will be the sole source of gain for the foreseeable future. While we may change this policy at some point in the future, we cannot assure that we will make such a change.
Risks related to our capital structure
We have a significant amount of indebtedness which could adversely affect our cash flow and our ability to remain in compliance with debt covenants and make payments on our indebtedness.
We have a significant amount of indebtedness. As of December 31, 2013, we had total indebtedness of $1,187.8 million. Our significant level of indebtedness increases the possibility that we may be unable to generate cash sufficient to pay, when due, the principal of, interest on or other amounts due in respect of our indebtedness. Our significant indebtedness, combined with our lease and other financial obligations and contractual commitments could have other important consequences. For example, it could:
·
|
make it more difficult for us to satisfy our obligations with respect to our indebtedness, which could result in an event of default under the agreements governing our indebtedness;
|
·
|
make us more vulnerable to adverse changes in general economic, industry and competitive conditions and adverse changes in government regulation;
|
·
|
require us to dedicate a portion of our cash flow from operations to payments on our indebtedness, thereby reducing the availability of our cash flows to fund working capital, capital expenditures, acquisitions and other general corporate purposes;
|
·
|
limit our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;
|
·
|
place us at a competitive disadvantage compared to our competitors that have less debt; and
|
·
|
limit our ability to borrow additional amounts for working capital, capital expenditures, acquisitions, debt service requirements, execution of our business strategy or other purposes.
|
Any of the above-listed factors could materially adversely affect our business, financial condition, results of operations and cash flows. While we maintain interest rate swaps covering a portion of our outstanding debt, our interest expense could increase if interest rates increase because debt under our credit facilities bears interest at a variable rate once above a certain LIBOR floor. If we do not have sufficient earnings to service our debt, we may be required to refinance all or part of our existing debt, sell assets, borrow more money or sell securities, none of which we can guarantee we will be able to do.
The terms of our credit facilities restrict our current and future operations, particularly our ability to respond to changes in our business or to take certain actions.
Our credit facilities contain, and any future indebtedness of ours or our subsidiaries would likely contain, a number of restrictive covenants that impose significant operating and financial restrictions on us and our subsidiaries, including restrictions on our ability to engage in acts that may be in our best long-term interests. These restrictions include, among other things, our ability to:
·
|
incur or assume additional debt or guarantees or issue preferred stock;
|
·
|
pay dividends, or make redemptions and repurchases, with respect to capital stock;
|
·
|
prepay, or make redemptions and repurchases of, subordinated debt;
|
·
|
make loans and investments;
|
·
|
make capital expenditures;
|
·
|
engage in mergers, acquisitions, asset sales, sale/leaseback transactions and transactions with affiliates;
|
·
|
change the business conducted by us or our subsidiaries; and
|
·
|
amend the terms of subordinated debt.
|
The operating and financial restrictions in our credit facilities and any future financing agreements may adversely affect our ability to finance future operations or capital needs or to engage in other business activities. A breach of any of the restrictive covenants in our credit facilities would result in a default. If any such default occurs, the lenders under our credit facilities may elect to declare all outstanding borrowings, together with accrued interest and other fees, to be immediately due and payable, or enforce their security interest, any of which would result in an event of default. The lenders will also have the right in these circumstances to terminate any commitments they have to provide further borrowings. Our existing credit facilities do not contain any financial maintenance covenants.
None.
We own, operate or lease manufacturing and distribution facilities located principally in Wisconsin (USA), Mexico, Italy and Brazil totaling over 3 million square feet. We also operate a dealer training center at our Eagle, Wisconsin facility, which allows us to train new industrial and residential dealers on the service and installation of our products and provide existing dealers with training on product innovations. We also have inventory warehouses in the United States that accommodate material storage and rapid response requirements of our customers.
The following table shows the location and activities of our principal operations:
|
|
|
|
Waukesha, WI
|
Owned
|
307,000
|
Corporate headquarters, manufacturing, storage, research and development, service parts distribution
|
Eagle, WI
|
Owned
|
242,000
|
Manufacturing, office, training
|
Whitewater, WI
|
Owned
|
491,000
|
Manufacturing, office, distribution
|
Oshkosh, WI
|
Owned
|
255,000
|
Manufacturing, storage, research and development
|
Berlin, WI |
Owned |
129,000 |
Manufacturing, office |
Berlin, WI
|
Leased |
123,000 |
Manufacturing, storage, research and development |
Fort Atkinson, WI
|
Leased
|
237,000
|
Storage
|
Edgerton, WI
|
Leased
|
575,000
|
Storage
|
Maquoketa, IA
|
Owned
|
137,000
|
Storage, rental property
|
Jefferson, WI |
Owned |
253,000 |
Manufacturing, distribution |
Jefferson, WI
|
Leased
|
441,000
|
Recently leased, soon-to-be-storage
|
Mexico City, Mexico
|
Owned
|
161,000
|
Manufacturing, sales, distribution, storage, office
|
Curitiba, Brazil
|
Leased
|
26,000
|
Manufacturing, sales, distribution, storage, office
|
Milan, Italy
|
Leased
|
118,000
|
Manufacturing, sales, distribution, storage, office
|
Milton Keynes, England
|
Leased
|
9,000 |
Sales, distribution, storage, office
|
As of December 31, 2013, substantially all of our owned properties are subject to collateral provisions under our senior secured credit facilities.
From time to time, we are involved in legal proceedings primarily involving product liability, patent and employment matters and general commercial disputes arising in the ordinary course of our business. As of December 31, 2013, we believe that there is no litigation pending that would have a material effect on our results of operations or financial condition.
Not Applicable.
PART II
Price Range of Common Stock
Shares of our common stock are traded on the New York Stock Exchange (NYSE) under the symbol “GNRC.” The following table sets forth the high and low sales prices reported on the NYSE for our common stock by fiscal quarter during 2013 and 2012, respectively.
|
|
2013 |
|
|
|
High
|
|
|
Low
|
|
Fourth Quarter
|
|
$ |
57.05 |
|
|
$ |
39.01 |
|
Third Quarter
|
|
$ |
44.30 |
|
|
$ |
37.11 |
|
Second Quarter
|
|
$ |
41.48 |
|
|
$ |
32.41 |
|
First Quarter
|
|
$ |
41.40 |
|
|
$ |
32.72 |
|
|
|
2012 |
|
|
|
High
|
|
|
Low
|
|
Fourth Quarter
|
|
$ |
39.18 |
|
|
$ |
24.43 |
|
Third Quarter
|
|
$ |
25.33 |
|
|
$ |
18.35 |
|
Second Quarter
|
|
$ |
30.61 |
|
|
$ |
22.40 |
|
First Quarter
|
|
$ |
30.50 |
|
|
$ |
24.27 |
|
The following table summarizes the stock repurchase activity for the twelve months ended December 31, 2013, which consisted of the withholding of shares upon the vesting of restricted stock awards to pay withholding taxes:
(in thousands, except share and per share data)
|
|
Total Number of Shares Purchased
|
|
|
Average Price Paid
per Share
|
|
|
Total Number Of Shares Purchased As Part Of
Publicly Announced
Plans Or Programs
|
|
|
Approximate Dollar Value
Of Shares That May Yet Be Purchased Under The
Plans Or Programs
|
|
01/01/13 - 01/31/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
02/01/13 - 02/28/13
|
|
|
162,819 |
|
|
$ |
40.18 |
|
|
|
N/A |
|
|
|
N/A |
|
03/01/13 - 03/31/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
04/01/13 - 04/30/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
05/01/13 - 05/31/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
06/01/13 - 06/30/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
07/01/13 - 07/31/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
08/01/13 - 08/31/13
|
|
|
227 |
|
|
$ |
42.09 |
|
|
|
N/A |
|
|
|
N/A |
|
09/01/13 - 09/30/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
10/01/13 - 10/31/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
11/01/13 - 11/30/13
|
|
|
412 |
|
|
$ |
46.42 |
|
|
|
N/A |
|
|
|
N/A |
|
12/01/13 - 12/31/13
|
|
|
- |
|
|
$ |
- |
|
|
|
N/A |
|
|
|
N/A |
|
Total
|
|
|
163,458 |
|
|
$ |
40.20 |
|
|
|
|
|
|
|
|
|
For equity compensation plan information, please refer to note 10 in Item 8 in Part II of this 10-K.
Stock Performance Graph
The line graph below compares the cumulative total stockholder return on our common stock with the cumulative total return of the Standard & Poor’s S&P 500 Index and S&P 500 Industrials Index for the year ended December 31, 2013. The graph and table assume that $100 was invested on February 11, 2010 (first day of trading) in each of our common stock, the S&P 500 Index, S&P 500 Industrials Index, and that all dividends were reinvested. Cumulative total stockholder returns for our common stock, the S&P 500 Index, and the S&P 500 Industrials Index are based on our fiscal year.
Holders
As of February 24, 2014, there were approximately 139 registered holders of record of Generac’s common stock. A substantially greater number of holders of Generac common stock are “street name” or beneficial holders, whose shares are held of record by banks, brokers, and other financial institutions.
Dividends
On June 21, 2013, the Company used a portion of the proceeds from the May 31, 2013 debt refinancing (see footnote #6 – Credit Agreements in Item 8 of this Annual Report on Form 10-K) to pay a special cash dividend of $5.00 per share on its common stock, resulting in payments totaling $340.8 million to stockholders. We currently do not have plans to pay any further dividends on our common stock in the near term. However, in the future, subject to factors such as general economic and business conditions, our financial condition and results of operations, our capital requirements, our future liquidity and capitalization and such other factors that our board of directors may deem relevant, we may change this policy and choose to pay dividends. Our ability to pay dividends on our common stock is currently restricted by the terms of our senior secured credit facilities and may be further restricted by any future indebtedness we incur. Our business is conducted through our subsidiaries, including our principal operating subsidiary, Generac Power Systems. Dividends from, and cash generated by our subsidiaries will be our principal sources of cash to repay indebtedness, fund operations and pay dividends. Accordingly, our ability to pay dividends to our stockholders is dependent on the earnings and distributions of funds from our subsidiaries, including Generac Power Systems.
Securities Authorized for Issuance Under Equity Compensation Plans
The information required by this item will be included in our 2014 Proxy Statement and is incorporated herein by reference.
Recent Sales of Unregistered Securities
None.
Use of Proceeds from Registered Securities
Not applicable.
The following table sets forth our selected historical consolidated financial data for the periods and at the dates indicated. The selected historical consolidated financial data for the years ended December 31, 2013, 2012 and 2011 are derived from our audited consolidated financial statements included elsewhere in this annual report. The selected historical consolidated financial data for the years ended December 31, 2010 and December 31, 2009 are derived from our audited historical consolidated financial statements not included in this annual report.
The results indicated below and elsewhere in this annual report are not necessarily indicative of our future performance. You should read this information together with “Item 7—Management's Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes included in Item 8 of this Annual Report on Form 10-K.
(Dollars in thousands, except per share data)
|
|
Year ended December 31, 2013
|
|
|
Year ended December 31, 2012
|
|
|
Year ended December 31, 2011
|
|
|
Year ended December 31, 2010
|
|
|
Year ended December 31, 2009
|
|
Statement of operations data:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net sales
|
|
$ |
1,485,765 |
|
|
$ |
1,176,306 |
|
|
$ |
791,976 |
|
|
$ |
592,880 |
|
|
$ |
588,248 |
|
Costs of goods sold
|
|
|
916,205 |
|
|
|
735,906 |
|
|
|
497,322 |
|
|
|
355,523 |
|
|
|
352,398 |
|
Gross profit
|
|
|
569,560 |
|
|
|
440,400 |
|
|
|
294,654 |
|
|
|
237,357 |
|
|
|
235,850 |
|
Operating expenses:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selling and service
|
|
|
107,515 |
|
|
|
101,448 |
|
|
|
77,776 |
|
|
|
57,954 |
|
|
|
59,823 |
|
Research and development
|
|
|
29,271 |
|
|
|
23,499 |
|
|
|
16,476 |
|
|
|
14,700 |
|
|
|
10,842 |
|
General and administrative
|
|
|
55,490 |
|
|
|
46,031 |
|
|
|
30,012 |
|
|
|
22,599 |
|
|
|
14,713 |
|
Amortization of intangibles (1)
|
|
|
25,819 |
|
|
|
45,867 |
|
|
|
48,020 |
|
|
|
51,808 |
|
|
|
51,960 |
|
Trade name write-down (2)
|
|
|
— |
|
|
|
— |
|
|
|
9,389 |
|
|
|
— |
|
|
|
— |
|
Total operating expenses
|
|
|
218,095 |
|
|
|
216,845 |
|
|
|
181,673 |
|
|
|
147,061 |
|
|
|
137,338 |
|
Income from operations
|
|
|
351,465 |
|
|
|
223,555 |
|
|
|
112,981 |
|
|
|
90,296 |
|
|
|
98,512 |
|
Other income (expense):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interest expense
|
|
|
(54,435 |
) |
|
|
(49,114 |
) |
|
|
(23,718 |
) |
|
|
(27,397 |
) |
|
|
(70,862 |
) |
(Loss) gain on extinguishment of debt (3)
|
|
|
(15,336 |
) |
|
|
(14,308 |
) |
|
|
(377 |
) |
|
|
(4,809 |
) |
|
|
14,745 |
|
Investment income
|
|
|
91 |
|
|
|
79 |
|
|
|
110 |
|
|
|
235 |
|
|
|
2,205 |
|
Costs related to acquisition
|
|
|
(1,086 |
) |
|
|
(1,062 |
) |
|
|
(875 |
) |
|
|
— |
|
|
|
— |
|
Other, net
|
|
|
(1,983 |
) |
|
|
(2,798 |
) |
|
|
(1,155 |
) |
|
|
(1,105 |
) |
|
|
(1,206 |
) |
Total other expense, net
|
|
|
(72,749 |
) |
|
|
(67,203 |
) |
|
|
(26,015 |
) |
|
|
(33,076 |
) |
|
|
(55,118 |
) |
Income before provision for income taxes
|
|
|
278,716 |
|
|
|
156,352 |
|
|
|
86,966 |
|
|
|
57,220 |
|
|
|
43,394 |
|
Provision (benefit) for income taxes (4)
|
|
|
104,177 |
|
|
|
63,129 |
|
|
|
(237,677 |
) |
|
|
307 |
|
|
|
339 |
|
Net income
|
|
$ |
174,539 |
|
|
$ |
93,223 |
|
|
$ |
324,643 |
|
|
$ |
56,913 |
|
|
$ |
43,055 |
|
Income per share - diluted:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Common Stock (formerly Class A non-voting common stock) (5)
|
|
|
2.51 |
|
|
|
1.35 |
|
|
|
4.79 |
|
|
|
(1.65 |
) |
|
|
(41,111 |
) |
Class B Common Stock (5)
|
|
|
n/a |
|
|
|
n/a |
|
|
|
n/a |
|
|
|
505 |
|
|
|
4,171 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement of cash flows data:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Depreciation
|
|
|
10,955 |
|
|
|
8,293 |
|
|
|
8,103 |
|
|
|
7,632 |
|
|
|
7,715 |
|
Amortization
|
|
|
25,819 |
|
|
|
45,867 |
|
|
|
48,020 |
|
|
|
51,808 |
|
|
|
51,960 |
|
Expenditures for property and equipment
|
|
|
(30,770 |
) |
|
|
(22,392 |
) |
|
|
(12,060 |
) |
|
|
(9,631 |
) |
|
|
(4,525 |
) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other financial data:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusted EBITDA (6)
|
|
|
402,613 |
|
|
|
289,809 |
|
|
|
188,476 |
|
|
|
156,249 |
|
|
|
159,087 |
|
Adjusted Net Income (7)
|
|
|
301,664 |
|
|
|
220,792 |
|
|
|
147,176 |
|
|
|
115,954 |
|
|
|
83,643 |
|
(Dollars in thousands)
|
|
As of December 31, 2013
|
|
|
As of December 31, 2012
|
|
|
As of December 31, 2011
|
|
|
As of December 31, 2010
|
|
|
As of December 31, 2009
|
|
Balance sheet data:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Current assets
|
|
$ |
654,179 |
|
|
$ |
522,553 |
|
|
$ |
383,265 |
|
|
$ |
272,519 |
|
|
$ |
345,017 |
|
Property, plant and equipment, net
|
|
|
146,390 |
|
|
|
104,718 |
|
|
|
84,384 |
|
|
|
75,287 |
|
|
|
73,374 |
|
Goodwill
|
|
|
608,287 |
|
|
|
552,943 |
|
|
|
547,473 |
|
|
|
527,148 |
|
|
|
525,875 |
|
Other intangibles and other assets
|
|
|
389,349 |
|
|
|
423,633 |
|
|
|
537,671 |
|
|
|
334,929 |
|
|
|
392,977 |
|
Total assets
|
|
$ |
1,798,205 |
|
|
$ |
1,603,847 |
|
|
$ |
1,552,793 |
|
|
$ |
1,209,883 |
|
|
$ |
1,337,243 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total current liabilities
|
|
$ |
250,845 |
|
|
$ |
294,859 |
|
|
$ |
165,390 |
|
|
$ |
86,685 |
|
|
$ |
131,971 |
|
Long-term borrowings, less current portion
|
|
|
1,175,349 |
|
|
|
799,018 |
|
|
|
575,000 |
|
|
|
657,229 |
|
|
|
1,052,463 |
|
Other long-term liabilities
|
|
|
54,940 |
|
|
|
46,342 |
|
|
|
43,514 |
|
|
|
24,902 |
|
|
|
17,418 |
|
Redeemable stock (8)
|
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
— |
|
|
|
878,205 |
|
Stockholders' equity
|
|
|
317,071 |
|
|
|
463,628 |
|
|
|
768,889 |
|
|
|
441,067 |
|
|
|
(742,814 |
) |
Total liabilities, redeemable stock and stockholders' equity (8)
|
|
$ |
1,798,205 |
|
|
$ |
1,603,847 |
|
|
$ |
1,552,793 |
|
|
$ |
1,209,883 |
|
|
$ |
1,337,243 |
|
(1) Our amortization of intangibles expenses includes the straight-line amortization of customer lists, patents and other finite-lived intangibles assets.
(2) During the fourth quarter of 2011, the Company decided to strategically transition certain products to their more widely known Generac brand. Based on this decision, the Company recorded a $9.4 million non-cash charge which primarily related to the write down of the impacted trade name to net realizable value.
(3) During 2013, the Company wrote-off a portion of deferred financing costs and original issue discount as a result of accelerated debt repayments in February and May 2013. Additionally, the Company recorded a loss on extinguishment of debt during 2013 as a result of the refinancing transaction that occurred on May 31, 2013. During 2012, the Company recorded a loss on extinguishment of debt related to the refinancing transactions that occurred on February 9, 2012 and May 30, 2012. During 2011 and 2010, the Company wrote-off a portion of deferred financing costs related to accelerated repayments of debt. During 2009, affiliates of CCMP acquired $9.9 million principal amount of first lien term loans and $20.0 million principal amount of second lien term loans for approximately $14.8 million. CCMP's affiliates exchanged this debt for 1,475.4596 shares of Series A Preferred Stock. The fair value of the shares exchanged was $14.8 million. We recorded this transaction as additional Series A Preferred Stock of $14.8 million based on the fair value of the debt contributed by CCMP's affiliates, which approximated the fair value of shares exchanged. The debt was held in treasury at face value. Consequently, we recorded a gain on extinguishment of debt of $14.7 million, which includes a write-off of deferred financing fees and other closing costs, in the consolidated statement of operations for the year ended December 31, 2009.
(4) The 2011 net tax benefit of $237.7 million includes a tax benefit of $271.4 million recorded due to the reversal of valuation allowances recorded on the Company’s net deferred tax assets. See Note 8 – Income Taxes in Item 8 of this Annual Report on Form 10-K for additional details.
(5) Diluted earnings per share reflects the impact of a reverse stock split which occurred immediately prior to the initial public offering (IPO). At the time of the IPO on February 17, 2010, all shares of Class B common stock were converted into shares of Class A common stock, and the Class A common stock became the one class of outstanding common stock.
(6) Adjusted EBITDA represents net income before interest expense, taxes, depreciation and amortization, as further adjusted for the other items reflected in the reconciliation table set forth below. The computation of adjusted EBITDA is based on the definition of EBITDA contained in Generac's New Term Loan Credit Agreement and New ABL Credit Agreement (terms defined in Item 7 - Management’s Discussion and Analysis of Financial Condition and Results of Operations – Liquidity and Financial Position), dated as of May 31, 2013, which is substantially the same definition that was contained in the Company’s previous credit agreements.
We view Adjusted EBITDA as a key measure of our performance. We present Adjusted EBITDA not only due to its importance for purposes of our New Term Loan Credit Agreement and New ABL Credit Agreement but also because it assists us in comparing our performance across reporting periods on a consistent basis because it excludes items that we do not believe are indicative of our core operating performance. Our management uses Adjusted EBITDA:
• for planning purposes, including the preparation of our annual operating budget and developing and refining our internal projections for future periods;
• to allocate resources to enhance the financial performance of our business;
• as a benchmark for the determination of the bonus component of compensation for our senior executives under our management incentive plan, as described further in our Proxy Statement;
• to evaluate the effectiveness of our business strategies and as a supplemental tool in evaluating our performance against our budget for each period; and
• in communications with our board of directors and investors concerning our financial performance.
We believe Adjusted EBITDA is used by securities analysts, investors and other interested parties in the evaluation of our company. Management believes the disclosure of Adjusted EBITDA offers an additional financial metric that, when coupled with U.S. GAAP results and the reconciliation to U.S. GAAP results, provides a more complete understanding of our results of operations and the factors and trends affecting our business. We believe Adjusted EBITDA is useful to investors for the following reasons:
• Adjusted EBITDA and similar non-GAAP measures are widely used by investors to measure a company's operating performance without regard to items that can vary substantially from company to company depending upon financing and accounting methods, book values of assets, tax jurisdictions, capital structures and the methods by which assets were acquired;
• investors can use Adjusted EBITDA as a supplemental measure to evaluate the overall operating performance of our company, including our ability to service our debt and other cash needs; and
• by comparing our Adjusted EBITDA in different historical periods, our investors can evaluate our operating performance excluding the impact of items described below.
The adjustments included in the reconciliation table listed below are provided for under our New Term Loan Credit Agreement and New ABL Credit Agreement and also are presented to illustrate the operating performance of our business in a manner consistent with the presentation used by our management and board of directors. These adjustments eliminate the impact of a number of items that:
• we do not consider indicative of our ongoing operating performance, such as non-cash write-down and other charges, non-cash gains and write-offs relating to the retirement of debt, severance costs and other restructuring-related business optimization expenses;
• we believe to be akin to, or associated with, interest expense, such as administrative agent fees, revolving credit facility commitment fees and letter of credit fees;
• are non-cash in nature, such as share-based compensation; or
• were eliminated following the consummation of our initial public offering.
We explain in more detail in footnotes (a) through (d) below why we believe these adjustments are useful in calculating Adjusted EBITDA as a measure of our operating performance.
Adjusted EBITDA does not represent, and should not be a substitute for, net income or cash flows from operations as determined in accordance with U.S. GAAP. Adjusted EBITDA has limitations as an analytical tool, and you should not consider it in isolation, or as a substitute for analysis of our results as reported under U.S. GAAP. Some of the limitations are:
• Adjusted EBITDA does not reflect our cash expenditures, or future requirements for capital expenditures or contractual commitments;
• Adjusted EBITDA does not reflect changes in, or cash requirements for, our working capital needs;
• Adjusted EBITDA does not reflect the significant interest expense, or the cash requirements necessary to service interest or principal payments, on our debt;
• although depreciation and amortization are non-cash charges, the assets being depreciated and amortized will often have to be replaced in the future, and Adjusted EBITDA does not reflect any cash requirements for such replacements;
• several of the adjustments that we use in calculating Adjusted EBITDA, such as non-cash write-downs and other charges, while not involving cash expense, do have a negative impact on the value our assets as reflected in our consolidated balance sheet prepared in accordance with U.S. GAAP;
• other companies may calculate Adjusted EBITDA differently than we do, limiting its usefulness as a comparative measure.
Furthermore, as noted above, one of our uses of Adjusted EBITDA is as a benchmark for determining elements of compensation for our senior executives. At the same time, some or all of these senior executives have responsibility for monitoring our financial results generally, including the items that are included as adjustments in calculating Adjusted EBITDA (subject ultimately to review by our board of directors in the context of the board's review of our financial statements). While many of the adjustments (for example, transaction costs and credit facility fees), involve mathematical application of items reflected in our financial statements, others involve a degree of judgment and discretion. While we believe that all of these adjustments are appropriate, and while the calculations are subject to review by our board of directors in the context of the board's review of our financial statements and certification by our chief financial officer in a compliance certificate provided to the lenders under our New Term Loan Credit Agreement and New ABL Credit Agreement, this discretion may be viewed as an additional limitation on the use of Adjusted EBITDA as an analytical tool.
Because of these limitations, Adjusted EBITDA should not be considered as a measure of discretionary cash available to us to invest in the growth of our business. We compensate for these limitations by relying primarily on our U.S. GAAP results and using Adjusted EBITDA only supplementally.
The following table presents a reconciliation of net income to Adjusted EBITDA:
(Dollars in thousands)
|
|
Year ended December 31, 2013
|
|
|
Year ended December 31, 2012
|
|
|
Year ended December 31, 2011
|
|
|
Year ended December 31, 2010
|
|
|
Year ended December 31, 2009
|
|
Net income
|
|
$ |
174,539 |
|
|
$ |
93,223 |
|
|
$ |
324,643 |
|
|
$ |
56,913 |
|
|
$ |
43,055 |
|
Interest expense
|
|
|
54,435 |
|
|
|
49,114 |
|
|
|
23,718 |
|
|
|
27,397 |
|
|
|
70,862 |
|
Depreciation and amortization
|
|
|
36,774 |
|
|
|
54,160 |
|
|
|
56,123 |
|
|
|
59,440 |
|
|
|
59,675 |
|
Income taxes provision (benefit)
|
|
|
104,177 |
|
|
|
63,129 |
|
|
|
(237,677 |
) |
|
|
307 |
|
|
|
339 |
|
Non-cash write-down and other charges (income) (a)
|
|
|
78 |
|
|
|
247 |
|
|
|
10,400 |
|
|
|
(361 |
) |
|
|
(1,592 |
) |
Non-cash share-based compensation expense (b)
|
|
|
12,368 |
|
|
|
10,780 |
|
|
|
8,646 |
|
|
|
6,363 |
|
|
|
— |
|
Loss (gain) on extinguishment of debt (c)
|
|
|
15,336 |
|
|
|
14,308 |
|
|
|
377 |
|
|
|
4,809 |
|
|
|
(14,745 |
) |
Transaction costs and credit facility fees (d)
|
|
|
3,863 |
|
|
|
4,117 |
|
|
|
1,719 |
|
|
|
1,019 |
|
|
|
1,188 |
|
Other
|
|
|
1,043 |
|
|
|
731 |
|
|
|
527 |
|
|
|
362 |
|
|
|
305 |
|
Adjusted EBITDA
|
|
$ |
402,613 |
|
|
$ |
289,809 |
|
|
$ |
188,476 |
|
|
$ |
156,249 |
|
|
$ |
159,087 |
|
(a) Represents the following non-cash charges:
• for the years ended December 31, 2013 and 2012, includes loss on disposals of assets, unrealized mark-to-market adjustments on commodity contracts and adjustments to an earn-out obligation in connection with a permitted business acquisition, as defined in our credit agreement;
• for the year ended December 31, 2011, primarily $9.4 million trade name write-down relating to the Comopany’s descision to strategically transition certain products to their more widely know Generac brand as further described in "Item 7 - Management's Discussion and Analysis of Financial Condition and Results of Operations—Critical accounting policies—Goodwill and other intangible assets." Also includes unrealized mark-to-market adjustments on copper forward contracts and loss on disposal of assets;
• for the years ended December 31, 2010 and 2009, primarily unrealized mark-to-market adjustments on copper and Euro forward contracts and loss on disposal of assets;
We believe that adjusting net income for these non-cash charges is useful for the following reasons:
• The loss on disposals of assets in several periods described above result from the sale of assets that are no longer useful in our business and therefore represent losses that are not from our core operations;
• The adjustments for unrealized mark-to-market gains and losses on commodity and Euro forward contracts represent non-cash items to reflect changes in the fair value of forward contracts that have not been settled or terminated. We believe it is useful to adjust net income for these items because the charges do not represent a cash outlay in the period in which the charge is incurred, although Adjusted EBITDA must always be used together with our U.S. GAAP statements of income and cash flows to capture the full effect of these contracts on our operating performance;
• The trade name write-down recorded in the year ended December 31, 2011 is a one-time charge that we believe does not reflect our ongoing operations;
(b) Represents share-based compensation expense to account for stock options, restricted stock and other stock awards over their vesting period.
(c) Represents the loss (gain) on extinguishment of debt from:
• for the year ended December 31, 2013, represents the write-off of a portion of deferred financing costs and original issue discount related to accelerated repayments of debt in February and May 2013, as well as the loss on extinguishment of debt related to the refinancing transaction that occurred on May 31, 2013.
• for the year ended December 31, 2012, represents the loss on extinguishment of debt related to the refinancing transactions that occurred on February 9, 2012 and May 30, 2012;
• for the years ended December 31, 2011 and 2010, represents the write-off of a portion of deferred financing costs related to accelerated repayments of debt;
• for the year ended December 31, 2009, represents non-cash gains on the extinguishment of debt repurchased by affiliates of CCMP, as described in note (3) above, which we do not expect to recur;
(d) Represents transaction costs incurred directly in connection with any investment, as defined in our credit agreement, equity issuance or debt issuance or refinancing, together with certain fees relating to our New Term Loan Credit Agreement and New ABL Credit Agreement, such as:
• administrative agent fees and revolving credit facility commitment fees under our New Term Loan Credit Agreement and New ABL Credit Agreement, which we believe to be akin to, or associated with, interest expense and whose inclusion in Adjusted EBITDA is therefore similar to the inclusion of interest expense in that calculation;
• transaction costs relating to the acquisition of a business;
• other financing costs incurred relating to the dividend recapitalization transactions completed in May 2012 and 2013;
• before 2011, transaction costs relating to repurchases of debt under our first and second lien credit facilities by affiliates of CCMP, which CCMP's affiliates contributed to our company in exchange for the issuances of securities, which repurchases we do not expect to recur;
(7) Adjusted Net Income is defined as net income before provision (benefit) for income taxes adjusted for the following items: cash income tax expense, amortization of intangible assets, amortization of deferred financing costs and original issue discount related to the Company’s debt, losses (gains) on extinguishment of the Company’s debt, intangible asset impairment charges, transaction costs and other purchase accounting adjustments, and certain non-cash gains and losses as reflected in the reconciliation table set forth below.
We believe Adjusted Net Income is used by securities analysts, investors and other interested parties in the evaluation of our company operations. Management believes the disclosure of Adjusted Net Income offers an additional financial metric that, when used in conjunction with U.S. GAAP results and the reconciliation to U.S. GAAP results, provides a more complete understanding of our results of operations, our cash flows, and the factors and trends affecting our business.
The adjustments included in the reconciliation table listed below are presented to illustrate the operating performance of our business in a manner consistent with the presentation used by investors and securities analysts. Similar to the Adjusted EBITDA reconciliation, these adjustments eliminate the impact of a number of items we do not consider indicative of our ongoing operating performance or cash flows, such as amortization costs, transaction costs and write-offs relating to the retirement of debt. We also make adjustments to present cash taxes paid as a result of our favorable tax attributes.
Similar to Adjusted EBITDA, Adjusted Net Income does not represent, and should not be a substitute for, net income or cash flows from operations as determined in accordance with U.S. GAAP. Adjusted Net Income has limitations as an analytical tool, and you should not consider it in isolation, or as a substitute for analysis of our results as reported under U.S. GAAP. Some of the limitations are:
• Adjusted Net Income does not reflect changes in, or cash requirements for, our working capital needs;
• although amortization is a non-cash charge, the assets being amortized may have to be replaced in the future, and Adjusted Net Income does not reflect any cash requirements for such replacements;
• other companies may calculate Adjusted Net Income differently than we do, limiting its usefulness as a comparative measure.
The following table presents a reconciliation of net income to Adjusted Net Income:
(Dollars in thousands)
|
|
Year ended December 31, 2013
|
|
|
Year ended December 31, 2012
|
|
|
Year ended December 31, 2011
|
|
|
Year ended December 31, 2010
|
|
|
Year ended December 31, 2009
|
|
Net income
|
|
$ |
174,539 |
|
|
$ |
93,223 |
|
|
$ |
324,643 |
|
|
$ |
56,913 |
|
|
$ |
43,055 |
|
Provision (benefit) for income taxes
|
|
|
104,177 |
|
|
|
63,129 |
|
|
|
(237,677 |
) |
|
|
307 |
|
|
|
339 |
|
Income before provision (benefit) for income taxes
|
|
|
278,716 |
|
|
|
156,352 |
|
|
|
86,966 |
|
|
|
57,220 |
|
|
|
43,394 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amortization of intangible assets
|
|
|
25,819 |
|
|
|
45,867 |
|
|
|
48,020 |
|
|
|
51,808 |
|
|
|
51,960 |
|
Amortization of deferred finance costs and original issue discount
|
|
|
4,772 |
|
|
|
3,759 |
|
|
|
1,986 |
|
|
|
2,439 |
|
|
|
3,417 |
|
Loss (gain) on extinguishment of debt
|
|
|
15,336 |
|
|
|
14,308 |
|
|
|
377 |
|
|
|
4,809 |
|
|
|
(14,745 |
) |
Trade name write-down
|
|
|
— |
|
|
|
— |
|
|
|
9,389 |
|
|
|
— |
|
|
|
— |
|
Transaction costs and other purchase accounting adjustments
|
|
|
2,842 |
|
|
|
3,317 |
|
|
|
875 |
|
|
|
— |
|
|
|
— |
|
Adjusted net income before provision for income taxes
|
|
|
327,485 |
|
|
|
223,603 |
|
|
|
147,613 |
|
|
|
116,276 |
|
|
|
84,026 |
|
Cash income tax expense
|
|
|
(25,821 |
) |
|
|
(2,811 |
) |
|
|
(437 |
) |
|
|
(322 |
) |
|
|
(383 |
) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjusted net income
|
|
$ |
301,664 |
|
|
$ |
220,792 |
|
|
$ |
147,176 |
|
|
$ |
115,954 |
|
|
$ |
83,643 |
|
(8) Includes our Series A Preferred Stock and Class B Common Stock.
The following discussion and analysis of our financial condition and results of operations should be read together with “Item 6 - Selected Financial Data” and the consolidated financial statements and the related notes included in Item 8 of this Annual Report on Form 10-K. This discussion contains forward-looking statements, based on current expectations and related to future events and our future financial performance, that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of many factors, including those set forth under “Item 1A - Risk Factors.”
Overview
We are a leading designer and manufacturer of a wide range of power generation equipment and other engine powered products serving the residential, light commercial, industrial and construction markets. Unlike our primary competitors in the generator market, power generation is our main focus. As the only significant market participant focused predominantly on these products, we have one of the leading market positions in the power equipment market in North America and an expanding presence internationally. We believe we have one of the widest range of products in the marketplace, including residential, commercial and industrial standby generators, as well as portable and mobile generators used in a variety of applications. Other engine powered products that we design and manufacture include light towers which provide temporary lighting for various end markets and a broad product line of power washers for residential and commercial use.
Business drivers and operational factors
In operating our business and monitoring its performance, we pay attention to a number of business drivers and trends as well as operational factors. The statements in this section are based on our current expectations.
Business drivers and trends
Our performance is affected by the demand for reliable power solutions by our customer base. This demand is influenced by several important drivers and trends affecting our industry, including the following:
Increasing penetration opportunity. Many potential customers are not aware of the costs and benefits of automatic backup power solutions. We estimate that penetration rates for home standby generators are only approximately 3.0% of U.S. single-family detached, owner-occupied households with a home value of over $100,000, as defined by the U.S. Census Bureau's 2011 American Housing Survey for the United States. The decision to purchase backup power for many light-commercial buildings such as convenience stores, restaurants and gas stations are more return-on-investment (ROI) driven and as a result these applications have relatively lower penetration rates as compared to buildings used in more code-driven or mission critical applications such as hospitals, wastewater treatment facilities, 911 call centers, data centers and certain industrial locations. In addition, the emergence of lower cost, cleaner burning natural gas fueled generators has helped to accelerate the penetration of standby generators in the light-commercial market. Also, the importance of backup power for telecommunications infrastructure is increasing due to the growing importance for uninterrupted voice and data services. We believe by expanding our distribution network, continuing to develop our product line, and targeting our marketing efforts, we can continue to build awareness and increase penetration for our standby generators.
Effect of large scale power disruptions. Power disruptions are an important driver of customer awareness and have historically influenced demand for generators. Increased frequency and duration of major power outage events caused by the aging U.S. power grid increases product awareness and may drive consumers to accelerate their purchase of a standby or portable generator during the immediate and subsequent period, which we believe may last for six to twelve months for standby generators. For example, the multiple major outage events that occurred during the second half of both 2011 and 2012 drove strong demand for portable and home standby generators, and the increased awareness of these products contributed to substantial organic revenue growth in 2012 with strong growth continuing during 2013. While there are localized power outages that occur practically every day across the U.S., major outage activity is unpredictable by nature and, as a result, our sales levels and profitability may fluctuate from period to period.
Impact of residential investment cycle. The market for residential generators is also affected by the residential investment cycle and overall consumer confidence and sentiment. When homeowners are confident of their household income, the value of their home and overall net worth, they are more likely to invest in their home. These trends can have an impact on demand for residential generators. Trends in the new housing market highlighted by residential housing starts can also impact demand for our residential products.
Impact of business capital investment cycle. The market for our commercial and industrial products is affected by the overall capital investment cycle, including non-residential building construction, durable goods and infrastructure spending as well as investments in the exploration and production of oil & gas, as businesses or organizations either add new locations or make investments to upgrade existing locations or equipment. These trends can have a material impact on demand for these products. The capital investment cycle may differ for the various commercial and industrial end markets that we serve including light commercial, retail, telecommunications, industrial, data centers, healthcare, construction, oil & gas and municipal infrastructure, among others. The market for these products is also affected by general economic conditions and credit availability in the geographic regions that we serve. In addition, we believe demand for our mobile power products will continue to benefit from a secular shift towards renting versus buying this type of equipment.
Factors affecting results of operations
We are subject to various factors that can affect our results of operations, which we attempt to mitigate through factors we can control, including continued product development, expanded distribution, pricing and cost control. Certain operational and other factors that affect our business include the following:
Effect of commodity, currency and component price fluctuations. Industry-wide price fluctuations of key commodities, such as steel, copper and aluminum and other components we use in our products, together with foreign currency fluctuations, can have a material impact on our results of operations. We have historically attempted to mitigate the impact of rising commodity, currency and component prices through improved product design and sourcing, manufacturing efficiencies, price increases and select hedging transactions. Our results are also influenced by changes in fuel prices in the form of freight rates, which in some cases are borne by our customers and in other cases are paid by us.
Seasonality. Although there is demand for our products throughout the year, in each of the past three years approximately 16% to 27% of our net sales occurred in the first quarter, 20% to 23% in the second quarter, 24% to 30% in the third quarter and 25% to 34% in the fourth quarter, with different seasonality depending on the presence, timing and severity of major power outage activity in each year. Major outage activity is unpredictable by nature and, as a result, our sales levels and profitability may fluctuate from period to period. For example, there were multiple major power outage events that occurred during the second half of both 2011 and 2012, which were significant in terms of severity. As a result, the seasonality experienced during this time period varied relative to other periods where no major outage events occurred. We maintain a flexible production and supply chain infrastructure in order to respond to outage-driven peak demand, but assuming no major outage events, typically increase production levels in the second and third quarters of each year.
Factors influencing interest expense. Interest expense can be impacted by a variety of factors, including market fluctuations in LIBOR, interest rate election periods, interest rate swap agreements and repayments of indebtedness. Interest expense increased during 2013 compared to 2012, primarily due to an increase in outstanding debt and the full-year weighted-average cost of debt associated with our credit agreement refinancings. See Note 6 – Credit Agreements in Item 8 of this Annual Report on Form 10-K for additional details.
Factors influencing provision for income taxes and cash income taxes paid. We had approximately $960 million of tax-deductible goodwill and intangible asset amortization remaining as of December 31, 2013 related to our acquisition by CCMP in 2006 that we expect to generate cash tax savings of approximately $374 million through 2021, assuming continued profitability and a 39% tax rate. The recognition of the tax benefit associated with these assets for tax purposes is expected to be $122 million annually through 2020 and $102 million in 2021, which generates annual cash tax savings of $48 million through 2020 and $40 million in 2021, assuming profitability and a 39% tax rate. As a result of the asset acquisition of the Magnum Products business in the fourth quarter of 2011, we had approximately $48.3 million of incremental tax deductible goodwill and intangible assets remaining as of December 31, 2013. We expect these assets to generate cash tax savings of $18.9 million through 2026 assuming continued profitability and a 39% tax rate. The amortization of these assets for tax purposes is expected to be $3.8 million annually through 2025 and $2.8 million in 2026, which generates an additional annual cash tax savings of $1.5 million through 2025 and $1.1 million in 2026, assuming profitability and a 39% tax rate. Based on current business plans, we believe that our cash tax obligations through 2026 will be significantly reduced by these tax attributes. Other domestic acquisitions have resulted in additional tax deductible goodwill and intangible assets that will generate tax savings, but are not material to the Company’s consolidated financial statements.
In the second quarter of 2013, the dividend recapitalization discussed under “Liquidity and financial position” was completed. After considering the increased debt and related interest expense, the Company believes it will still generate sufficient taxable income to fully utilize the tax attributes discussed above.
Transactions with CCMP
In November 2006, affiliates of CCMP, together with certain other investors and members of our management, purchased an aggregate of $689 million of our equity capital. In addition, on November 10, 2006, Generac Power Systems borrowed an aggregate of $1.38 billion, consisting of an initial drawdown of $950 million under a $1.1 billion first lien secured credit facility and $430 million under a $430 million second lien secured credit facility. With the proceeds from these equity and debt financings, together with cash on hand at Generac Power Systems, we (1) acquired all of the capital stock of Generac Power Systems and repaid certain pre-transaction indebtedness of Generac Power Systems for $2.0 billion, (2) paid $66 million in transaction costs related to the transaction and (3) retained $3 million for general corporate purposes. Subsequently, during 2007, 2008 and 2009, affiliates of CCMP acquired approximately $249.2 million of second lien term loans and $9.9 million of first lien term loans for approximately $155.9 million. CCMP’s affiliates then exchanged this debt for additional shares of then-existing Class B Common Stock and Series A Preferred Stock, which were subsequently converted into the same class of our common stock through a corporate reorganization in conjunction with the initial public offering in February 2010.
In August 2013, CCMP completed the last of a series of sale transactions that began in November 2012 by which it sold substantially all of the shares of common stock that it owned as of the initial public offering.
Initial public offering
On February 17, 2010, the Company completed its initial public offering of 18,750,000 shares of its common stock at a price of $13.00 per share. In addition, the underwriters exercised their option and purchased an additional 1,950,500 shares of the Company’s common stock from the Company on March 18, 2010. We received a total of approximately $247.9 million in net proceeds from the initial public offering and underwriters’ option exercise, after deducting the underwriting discounts and expenses. All shares sold in this offering were primary shares. Immediately following the IPO and underwriters’ option exercise, we had 67,529,290 total shares of common stock outstanding.
Components of net sales and expenses
Net sales
Substantially all of our net sales are generated through the sale of our generators and other engine powered products for the residential, light commercial, industrial and construction markets. We also sell engines to certain customers and service parts to our dealer network. Net sales, which include shipping and handling charges billed to customers, are recognized upon shipment of products to our customers. Related freight costs are included in cost of sales. Our generators and other products are fueled by natural gas, liquid propane, gasoline, diesel or Bi-Fuel™ systems with power output from 800W to several megawatts (mW) using our multi-generator systems. Our products are primarily manufactured and assembled at our Wisconsin (USA), Mexico, Italy and Brazil facilities and distributed through thousands of outlets primarily across the U.S. and Canada, with an expanding presence internationally including Latin America, Europe, the Middle East, Africa and Asia/Pacific regions. Our smaller kW generators for the residential and commercial markets, as well as light towers and power washers, are primarily built to stock, while our larger kW products for the industrial markets are generally customized and built to order.
During 2013, our net sales were affected primarily by the U.S. economy as sales outside of the United States represented approximately 12% of total net sales.
We are not dependent on any one channel or customer for our net sales, with no single customer representing more than 6% of our sales for the year ended December 31, 2013 and our top ten customers representing less than 24% of our sales for the same period.
Costs of goods sold
The principal elements of costs of goods sold in our manufacturing operations are component parts, raw materials, factory overhead and labor. Component parts and raw materials comprised over 85% of costs of goods sold for the year ended December 31, 2013. The principal component parts are engines and alternators. We design and manufacture air-cooled engines for certain of our products up to 20kW. We source engines for certain of our smaller products and all of our products larger than 20kW. For natural gas engines, we’re recognized as the OEM of those engines. We design all the alternators for our units and manufacture alternators for certain of our units. We also manufacture other generator components where we believe we have a design and cost advantage. We source component parts from an extensive global network of reliable, high quality suppliers. In some cases, these relationships are proprietary.
The principal raw materials used in our manufacturing and warehousing processes and in the manufacturing of the components we source are steel, copper and aluminum. We are susceptible to fluctuations in the cost of these commodities, impacting our costs of goods sold. We seek to mitigate the impact of commodity prices on our business through a continued focus on global sourcing, product design improvements, manufacturing efficiencies, price increases and select hedging transactions. However, there is typically a lag between raw material price fluctuations and their effect on our costs of goods sold.
Other sources of costs include our manufacturing and warehousing facilities, factory overhead, labor and shipping costs. Factory overhead includes utilities, support personnel, depreciation, general supplies, support and maintenance. Although we attempt to maintain a flexible manufacturing cost structure, our margins can be impacted when we cannot timely adjust labor and manufacturing costs to match fluctuations in net sales.
Operating expenses
Our operating expenses consist of costs incurred to support our sales, marketing, distribution, service parts, engineering, information systems, human resources, finance, risk management, legal and tax functions. All of these categories include personnel costs such as salaries, bonuses, employee benefit costs and taxes. We typically classify our operating expenses into four categories: selling and service, research and development, general and administrative, and amortization of intangibles.
Selling and service. Our selling and service expenses consist primarily of personnel expense, marketing expense, warranty expense and other sales expenses. Our personnel expense recorded in selling and services expenses includes the expense of our sales force responsible for our national accounts and other personnel involved in the marketing, sales and service of our products. Warranty expense, which is recorded at the time of sale, is estimated based on historical trends. Our marketing expenses include direct mail costs, printed material costs, product display costs, market research expenses, trade show expenses, media advertising and co-op advertising costs. Marketing expenses are generally related to the launch of new product offerings and opportunities within selected markets or associated with specific events such as awareness marketing in areas impacted by major power outages, participation in trade shows and other events.
Research and development. Our research and development expenses support numerous projects covering all of our product lines. We currently operate engineering facilities at eight locations globally and employ over 250 personnel with focus on new product development, existing product improvement and cost containment. Our commitment to research and development has resulted in a significant portfolio of over 100 U.S. and international patents and patent applications. Our research and development costs are expensed as incurred.
General and administrative. Our general and administrative expenses include personnel costs for general and administrative employees, accounting and legal professional services fees, information technology costs, insurance, travel and entertainment expense and other corporate expense.
Amortization of intangibles. Our amortization of intangibles expenses include the straight-line amortization of definite-lived customer lists, patents and other intangibles assets.
Goodwill and trade name. Goodwill primarily represents the excess of the amount paid over the fair market value of net tangible and intangible assets acquired in business combinations.
Other indefinite-lived intangible assets consist of trade names. The fair value of trade names is measured using a relief-from-royalty approach, which assumes the fair value of the trade name is the discounted cash flows of the amount that would be paid had we not owned the trade name and instead licensed the trade name from another company.
During the fourth quarter of 2011, we recorded a non-cash charge which primarily related to the write down of a certain trade name. We refer you to Note 2-Significant accounting policies-Goodwill and other indefinite-lived intangible assets in Item 8 of this Annual Report on Form 10-K for additional information about this charge.
Other income (expense)
Other income (expense) includes the interest expense on our outstanding borrowings, amortization of debt financing costs and original issue discount as well as expenses related to interest rate swap agreements. Other income (expense) also includes other financial items such as loss on extinguishment of debt and interest income earned on our cash and cash equivalents.
Costs related to acquisition. In 2013, other expenses include one-time transaction-related expenses related to the acquisitions of Tower Light and Baldor Generators. In 2012, other expenses include one-time transaction-related expenses related to the acquisition of the Ottomotores businesses. In 2011, other expenses include one-time transaction-related expenses related to the acquisition of the Magnum business.
Results of operations
Year ended December 31, 2013 compared to year ended December 31, 2012
The following table sets forth our consolidated statement of operations data for the periods indicated:
(Dollars in thousands)
|
|
Year ended December 31, 2013
|
|
|
Year ended December 31, 2012
|
|
Net sales
|
|
$ |
1,485,765 |
|
|
$ |
1,176,306 |
|
Costs of goods sold
|
|
|
916,205 |
|
|
|
735,906 |
|
Gross profit
|
|
|
569,560 |
|
|
|
440,400 |
|
Operating expenses:
|
|
|
|
|
|
|
|
|
Selling and service
|
|
|
107,515 |
|
|
|
101,448 |
|
Research and development
|
|
|
29,271 |
|
|
|
23,499 |
|
General and administrative
|
|
|
55,490 |
|
|
|
46,031 |
|
Amortization of intangibles
|
|
|
25,819 |
|
|
|
45,867 |
|
Total operating expenses
|
|
|
218,095 |
|
|
|
216,845 |
|
Income from operations
|
|
|
351,465 |
|
|
|
223,555 |
|
Total other expense, net
|
|
|
(72,749 |
) |
|
|
(67,203 |
) |
Income before provision for income taxes
|
|
|
278,716 |
|
|
|
156,352 |
|
Provision for income taxes
|
|
|
104,177 |
|
|
|
63,129 |
|
Net income
|
|
$ |
174,539 |
|
|
$ |
93,223 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Dollars in thousands)
|
|
Year ended December 31, 2013
|
|
|
Year ended December 31, 2012
|
|
Residential power products
|
|
$ |
843,727 |
|
|
$ |
705,444 |
|
Commercial & Industrial power products
|
|
|
569,890 |
|
|
|
410,341 |
|
Other
|
|
|
72,148 |
|
|
|
60,521 |
|
Net sales
|
|
$ |
1,485,765 |
|
|
$ |
1,176,306 |
|
Net sales. Net sales increased $309.5 million, or 26.3%, to $1,485.8 million for the year ended December 31, 2013 from $1,176.3 million for the year ended December 31, 2012. Residential product sales increased 19.6% to $843.7 million from $705.4 million for the comparable period in 2012. The increase in residential product sales was primarily driven by increases in shipments for home standby generators due to a combination of factors including the additional awareness and adoption of our products created by major power outages in recent years, the Company’s expanded distribution, increased sales and marketing initiatives, overall strong operational execution and an improving environment for residential investment. The strength in home standby generators was partially offset by a decline in shipments of portable generators due to less severe power outage events relative to the prior year. In addition, increased revenue from power washer products contributed to the year-over-year sales growth in residential products. Commercial & industrial product sales increased 38.9% to $569.9 million from $410.3 million for the comparable period in 2012. The increase was driven by the acquisitions of Ottomotores, Tower Light and Baldor Generators along with strong organic growth for stationary and mobile generators. The increase in organic revenues was primarily driven by strong shipments to national account customers and increased sales of natural gas generators used in light commercial applications.
Gross profit. Gross profit increased $129.2 million, or 29.3%, to $569.6 million for the year ended December 31, 2013 from $440.4 million for the year ended December 31, 2012. Gross profit margin for the year ended December 31, 2013 increased to 38.3% from 37.4% for the year ended December 31, 2012. Gross margin improved over the prior year due to the combination of improved product mix, improved pricing and a moderation in product costs due to lower commodity prices and execution of cost reduction initiatives. These margin improvements were partially offset by the mix impact from the Ottomotores and Baldor acquisitions.
Operating expenses. Operating expenses increased $1.3 million to $218.1 million for the year ended December 31, 2013 from $216.8 million for the year ended December 31, 2012. Operating expenses increased as a result of the addition of the Ottomotores, Tower Light and Baldor Generator businesses, as well as increased sales, engineering and administrative infrastructure to support the strategic growth initiatives and higher sales levels of the Company. These increases were mostly offset by warranty rate improvements resulting in a $17.6 million favorable adjustment to warranty reserves driven by better claims experience, which impacted selling and service expense, as well as a decline in the amortization of intangibles.
Other expense. Other expense increased $5.5 million, or 8.3%, to $72.7 million for the year ended December 31, 2013 from $67.2 million for the year ended December 31, 2012. These additional expenses were primarily driven by an increase in interest expense over prior year. Interest expense increased by $5.3 million, or 10.8% over the prior year due to the higher debt levels from the May 2012 and 2013 refinancing transactions, partially offset by a slight reduction in interest rate on the new credit facility.
Income tax expense. Income tax expense increased $41.1 million to $104.2 million for the year ended December 31, 2013 from $63.1 million for the year ended December 31, 2012. The increase in income tax expense was primarily driven by the increase in pre-tax income during 2013 compared to 2012, partially offset by a lower effective tax rate. The decrease in the effective income tax rate year-over-year is primarily due to the lower tax rate of a foreign subsidiary acquired during the fourth quarter of 2012 and the reinstatement of the federal research and development tax credit in 2013.
Net income. As a result of the factors identified above, we generated net income of $174.5 million for the year ended December 31, 2013 compared to $93.2 million for the year ended December 31, 2012. The increase in net income is due to the items previously described.
Adjusted EBITDA. Adjusted EBITDA, as reconciled in “Item 6 - Selected Financial Data,” increased to $402.6 million as compared to $289.8 million in 2012 due to the factors discussed above.
Adjusted net income. Adjusted Net Income, as reconciled in “Item 6 - Selected Financial Data,” increased to $301.7 million in 2013 compared to $220.8 million in 2012 due to the factors discussed above.
Year ended December 31, 2012 compared to year ended December 31, 2011
(Dollars in thousands)
|
|
Year ended December 31, 2012
|
|
|
Year ended December 31, 2011
|
|
Net sales
|
|
$ |
1,176,306 |
|
|
$ |
791,976 |
|
Costs of goods sold
|
|
|
735,906 |
|
|
|
497,322 |
|
Gross profit
|
|
|
440,400 |
|
|
|
294,654 |
|
Operating expenses:
|
|
|
|
|
|
|
|
|
Selling and service
|
|
|
101,448 |
|
|
|
77,776 |
|
Research and development
|
|
|
23,499 |
|
|
|
16,476 |
|
General and administrative
|
|
|
46,031 |
|
|
|
30,012 |
|
Amortization of intangibles
|
|
|
45,867 |
|
|
|
48,020 |
|
Trade name write-down
|
|
|
- |
|
|
|
9,389 |
|
Total operating expenses
|
|
|
216,845 |
|
|
|
181,673 |
|
Income from operations
|
|
|
223,555 |
|
|
|
112,981 |
|
Total other expense, net
|
|
|
(67,203 |
) |
|
|
(26,015 |
) |
Income before provision for income taxes
|
|
|
156,352 |
|
|
|
86,966 |
|
Provision (benefit) for income taxes
|
|
|
63,129 |
|
|
|
(237,677 |
) |
Net income
|
|
$ |
93,223 |
|
|
$ |
324,643 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Dollars in thousands)
|
|
Year ended December 31, 2012
|
|
|
Year ended December 31, 2011
|
|
Residential power products
|
|
|
705,444 |
|
|
|
491,016 |
|
Commercial & Industrial power products
|
|
|
410,341 |
|
|
|
250,270 |
|
Other
|
|
|
60,521 |
|
|
|
50,690 |
|
Net sales
|
|
|
1,176,306 |
|
|
|
791,976 |
|
Net sales. Net sales increased $384.3 million, or 48.5%, to $1,176.3 million for the year ended December 31, 2012 from $792.0 million for the year ended December 31, 2011. This increase was driven by a $214.4 million, or a 43.7% increase in residential product sales largely driven by increased demand created by major power outages in recent quarters along with expanded distribution and new product offerings. Commercial & industrial product sales increased $160.1million, or 64.0%, driven primarily by the additional Magnum Products revenue, and to a lesser extent, increased shipments of natural gas backup generators.
Gross profit. Gross profit increased $145.7 million, or 49.5%, to $440.4 million for the year ended December 31, 2012 from $294.7 million for the year ended December 31, 2011. Gross profit margin for the year ended December 31, 2012 increased to 37.4% from 37.2% for the year ended December 31, 2011. Gross margin increased over the prior year primarily due to the positive impact from price increases, improved manufacturing overhead absorption and moderation in commodity costs relative to the prior year. These margin improvements were partially offset by the mix impact from the addition of Magnum Products sales.
Operating expenses. Operating expenses increased $35.2 million to $216.8 million for the year ended December 31, 2012 from $181.7 million for the year ended December 31, 2011. These additional expenses were driven primarily by operating expenses associated with Magnum, increased sales, engineering and administrative infrastructure to support the strategic growth initiatives and higher sales levels of the Company, increased incentive compensation expenses as a result of the Company’s financial performance during the year, and increased variable expenses resulting from the increase in organic sales.
Other expense. Other expense increased $41.2 million, or 158.3%, to $67.2 million for the year ended December 31, 2012 from $26.0 million for the year ended December 31, 2011. Interest expense increased by $25.4 million, or 107.1% as a result of the higher debt levels from the May 2012 refinancing transaction. In addition, losses on extinguishment of debt increased $13.9 million in 2012 as a result of the February 2012 and May 2012 debt refinancing transactions.
Income tax expense. Income tax expense increased $300.8 million to a provision of $63.1 million for the year ended December 31, 2012 from a benefit of $237.7 million for the year ended December 31, 2011. The large income tax benefit in the prior year consisted primarily of the reversal of the full valuation allowance on the Company’s net deferred tax assets. We refer you to Note 9, “Income Taxes,” of our consolidated financial statements included in Item 8 of this Annual Report on Form 10-K for additional information.
Net income. As a result of the factors identified above, we generated net income of $93.2 million for the year ended December 31, 2012 compared to net income of $324.6 million for the year ended December 31, 2011. The decrease in net income is due to the items previously described.
Adjusted EBITDA. Adjusted EBITDA, as reconciled in “Item 6 - Selected Financial Data,” increased to $289.8 million as compared to $188.5 million in 2011 due to the factors discussed above.
Adjusted net income. Adjusted Net Income, as reconciled in “Item 6 - Selected Financial Data,” increased to $220.8 million in 2012 compared to $147.2 million in 2011 due to the factors discussed above.
Liquidity and financial position
Our primary cash requirements include payment for our raw material and component supplies, salaries & benefits, operating expenses, interest and principal payments on our debt and capital expenditures. We finance our operations primarily through cash flow generated from operations and, if necessary, borrowings under our revolving credit facility.
In February 2012, we paid in full our previously existing debt and entered into a new credit agreement (Credit Agreement). The Credit Agreement provided for borrowings under a $150.0 million revolving credit facility, a $325.0 million tranche A term loan facility and a $250.0 million tranche B term loan facility. Proceeds received from loans made under the Credit Agreement were used to repay in full all outstanding borrowings under the former credit agreement, dated as of November 10, 2006, as amended from time to time, and for general corporate purposes.
In May 2012, we amended and restated our then existing Credit Agreement by entering into a new credit agreement (Term Loan Credit Agreement) and a new revolving credit agreement (ABL Credit Agreement). The Term Loan Credit Agreement provided for a $900.0 million term loan B credit facility (Term Loan) and included a $125.0 million uncommitted incremental term loan facility and the ABL Credit Agreement provided for borrowings under a $150.0 million senior secured ABL revolving credit facility and an uncommitted $50.0 million incremental revolving credit facility. A portion of the proceeds from the Term Loan were used to repay the previous Credit Agreement. The remaining proceeds from the Term Loan were used, together with cash on hand, to pay a special cash dividend of $6.00 per share on our common stock (”2012 dividend recapitalization”).
On May 31, 2013, we amended and restated our then existing Term Loan Credit Agreement by entering into a new term loan credit agreement (New Term Loan Credit Agreement). The New Term Loan Credit Agreement provides for a $1.2 billion term loan B credit facility (New Term Loan) and includes a $300.0 million uncommitted incremental term loan facility. The New Term Loan Credit Agreement matures on May 31, 2020. Proceeds from the New Term Loan were used to repay the previous Term Loan Credit Agreement and to fund a special cash dividend of $5.00 per share on our common stock (“2013 dividend recapitalization”). Remaining funds from the New Term Loan were used for general corporate purposes and to pay related financing fees and expenses. The New Term Loan initially bears interest at rates based upon either a base rate plus an applicable margin of 1.75% or adjusted LIBOR rate plus an applicable margin of 2.75%, subject to a LIBOR floor of 0.75%. Beginning in the second quarter of 2014, the applicable margin related to base rate loans can be reduced to 1.50% and the applicable margin related to LIBOR rate loans can be reduced to 2.50%, in each case, if Generac Power Systems’ (Borrower) net debt leverage ratio falls below 3.00 to 1.00. Concurrent with the closing of the New Term Loan Credit Agreement, on May 31, 2013, we amended our existing ABL Credit Agreement. The amendment provides for a one year extension of the maturity date in respect of the $150.0 million senior secured ABL revolving credit facility provided under the ABL Credit Agreement (ABL Facility). The extended maturity date of the ABL Facility is May 31, 2018.
We refer you to Note 6, “Credit Agreements,” of our consolidated financial statements included in Item 8 of this Annual Report on Form 10-K for additional information.
At December 31, 2013, we had cash and cash equivalents of $150.1 million and $147.5 million of availability under our revolving credit facility, net of outstanding letters of credit and outstanding borrowings. On August 1, 2013, we used a substantial portion of our cash on hand to acquire the equity of Tower Light SRL and its wholly-owned subsidiaries (collectively, “Tower Light”). On November 1, 2013, we used a substantial portion of our cash on hand to purchase substantially all of the assets of Baldor Electric Company’s generator division (“Baldor Generators”).
Long-term liquidity
We believe that our cash flow from operations and our availability under our revolving credit facility, combined with our relatively low ongoing capital expenditure requirements and favorable tax attributes, which result in a lower cash tax rate as compared to the U.S. statutory tax rate, provides us with sufficient capital to continue to grow our business in the future. We will use a significant portion of our cash flow to pay interest and principal on our outstanding debt, impacting the amount available for working capital, capital expenditures and other general corporate purposes. As we continue to expand our business, we may in the future require additional capital to fund working capital, capital expenditures or acquisitions.
Cash flow
Year ended December 31, 2013 compared to year ended December 31, 2012
The following table summarizes our cash flows by category for the periods presented:
|
|
Year ended December 31,
|
|
|
|
|
|
|
(Dollars in thousands)
|
|
2013
|
|
|
2012
|
|
|
Change
|
|
% Change
|
|
Net cash provided by operating activities
|
|
$ |
259,944 |
|
|
$ |
235,594 |
|
|
$ |
24,350 |
|
|
|
10.3 |
% |
Net cash used in investing activities
|
|
$ |
(144,549 |
) |
|
$ |
(69,345 |
) |
|
$ |
(75,204 |
) |
|
|
(108.5 |
)% |
Net cash used in financing activities
|
|
$ |
(73,399 |
) |
|
$ |
(151,352 |
) |
|
$ |
77,953 |
|
|
|
51.5 |
% |
Net cash provided by operating activities was $259.9 million for 2013 compared to $235.6 million in 2012. This increase of $24.4 million, or 10.3%, is primarily attributable to strong operating earnings as a result of strong organic sales growth and improved operating margins partially offset by increased working capital investments, such as increases in inventory levels to support higher production rates and replenish finished good inventories.
Net cash used for investing activities for the year ended December 31, 2013 was $144.6 million. This included cash payments of $30.8 million for the purchase of property and equipment, $122.4 million for the acquisitions of the Tower Light and Baldor Generators businesses, partially offset by cash proceeds of $2.3 million from the sale of a business and $6.3 million relating to the finalization of the Ottomotores purchase price. Net cash used for investing activities for the year ended December 31, 2012 was $69.3 million. This included $22.4 million for the purchase of property and equipment and $47.0 million for the acquisition of the Ottomotores businesses.
Net cash used for financing activities was $73.4 million for the year ended December 31, 2013, primarily representing the net cash impact of debt prepayments and the dividend recapitalization transaction that occurred during the first half of 2013, including cash proceeds from long-term borrowings of $1,200.0 million offset by $901.2 million of long-term borrowing repayments. The Company paid $22.4 million for transaction fees incurred in connection with May 2013 refinancing transaction. Following the refinancing, the Company paid a special cash dividend of $5.00 per share ($340.8 million) on the Company’s common stock (incremental to the $2.6 million cash dividends paid during 2013, related to the 2012 dividend, due to the vesting of restricted stock awards). In addition, the Company paid $15.0 million in taxes related to the net share settlement of equity awards which was partially offset by approximately $11.6 million of excess tax benefits of equity awards. Finally, the Company received net cash proceeds of $16.0 million from short-term borrowings, which were more than offset by approximately $19.0 million of short-term borrowing repayments.
Net cash used for financing activities was $151.4 million for the year ended December 31, 2012, primarily representing the net cash impact of our refinancing activities and the dividend recapitalization transaction that occurred during the first half of 2012, including cash proceeds from long-term borrowings of $1,455.6 million offset by $1,175.1 million of long-term borrowing repayments. The Company made $25.7 million of cash payments for transaction fees incurred in connection with these refinancing transactions. Following the refinancing, the Company paid a special cash dividend of $6.00 per share ($404.3 million, which excludes dividends for unvested restricted stock) on the Company’s common stock during the second quarter of 2012.
Year ended December 31, 2012 compared to year ended December 31, 2011
The following table summarizes our cash flows by category for the periods presented:
|
|
|
|
Year ended December 31,
|
|
|
|
|
|
|
(Dollars in thousands)
|
|
2012
|
|
|
2011
|
|
|
Change
|
|
% Change
|
|
Net cash provided by operating activities
|
|
$ |
235,594 |
|
|
$ |
169,712 |
|
|
$ |
65,882 |
|
|
|
38.8 |
% |
Net cash used in investing activities
|
|
$ |
(69,345 |
) |
|
$ |
(95,953 |
) |
|
$ |
26,608 |
|
|
|
27.7 |
% |
Net cash used in financing activities
|
|
$ |
(151,352 |
) |
|
$ |
(59,216 |
) |
|
$ |
(92,136 |
) |
|
|
(155.6 |
)% |
Net cash provided by operating activities was $235.6 million for 2012 compared to $169.7 million in 2011. This increase of $65.9 million, or 38.8%, is primarily attributable to strong operating earnings partially offset by increased working capital investments, such as increases in inventory levels to support higher production rates.
Net cash used for investing activities for the year ended December 31, 2012 was $69.3 million. This included $22.4 million for the purchase of property and equipment and $47.0 million for the acquisition of the Ottomotores businesses. Net cash used for investing activities for the year ended December 31, 2011 was $96.0 million and included $12.1 million for the purchase of property and equipment and $83.9 million for the acquisition of the Magnum Products business. The increase in purchases of property and equipment was primarily driven by the purchase of a manufacturing facility and expansion of our corporate headquarters and engineering lab facilities.
Net cash used in financing activities was $151.4 million for the year ended December 31, 2012, an increase of $92.1 million in net cash outflows from 2011 primarily representing the net cash impact of our refinancing activities and dividend recapitalization transaction during the first half of 2012, including gross proceeds from long-term borrowings of $1,455.6 million offset by $1,175.1 million of long-term borrowing repayments. The Company made $25.7 million of cash payments for transaction fees incurred in connection with these refinancing transactions. Following the refinancing, the Company paid a special cash dividend of $6.00 per share ($404.3 million, which excludes dividends for unvested restricted stock) on the Company’s common stock during the second quarter of 2012. Net cash used in financing activities was $59.2 million for the year ended December 31, 2011, primarily related to long-term borrowing repayments.
Senior secured credit facilities
On May 31, 2013, the Borrower amended and restated its then existing Term Loan Credit Agreement by entering into the New Term Loan Credit Agreement with certain commercial banks and other lenders. The New Term Loan Credit Agreement provides for a $1,200.0 million New Term Loan and includes a $300.0 million uncommitted incremental term loan facility. The New Term Loan Credit Agreement matures on May 31, 2020. Proceeds from the New Term Loan were used to repay amounts outstanding under the Company’s previous Term Loan Credit Agreement and to fund a special cash dividend of $5.00 per share on the Company’s common stock. We refer you to Note 12, “Special Cash Dividend,” of our consolidated financial statements included in Item 8 of this Annual Report on Form 10-K for additional information. Remaining funds from the New Term Loans were used for general corporate purposes and to pay related financing fees and expenses.
The New Term Loan is guaranteed by all of the Borrower’s wholly-owned domestic restricted subsidiaries, Generac Acquisition Corp. (GAC) and the Company, and is secured by associated collateral agreements which pledge a first priority lien on virtually all of the Borrower’s assets, including fixed assets and intangibles, and the assets of the guarantors (other than the Company), other than all cash, trade accounts receivable, inventory, and other current assets and proceeds thereof, which will be secured by a second priority lien.
The New Term Loan amortizes in equal installments of 0.25% of the original principal amount of the New Term Loan payable on the first day of April, July, October and January commencing on October 1, 2013 until the final maturity date of the New Term Loan on May 31, 2020. The New Term Loan initially bears interest at rates based upon either a base rate plus an applicable margin of 1.75% or adjusted LIBOR rate plus an applicable margin of 2.75%, subject to a LIBOR floor of 0.75%. Beginning in the second quarter of 2014, the applicable margin related to base rate loans can be reduced to 1.50% and the applicable margin related to LIBOR rate loans can be reduced to 2.50%, in each case, if the Borrower’s net debt leverage ratio falls below 3.00 to 1.00.
Concurrent with the closing of the New Term Loan Credit Agreement, on May 31, 2013, the Borrower amended its existing ABL Credit Agreement by entering into the New ABL Credit Agreement. The amendment provides for a one year extension of the maturity date in respect of the $150.0 million ABL Facility. The extended maturity date of the ABL Facility is May 31, 2018.
Borrowings under the ABL Facility are guaranteed by all of the Borrower’s wholly-owned domestic restricted subsidiaries and GAC, and are secured by associated collateral agreements which pledge a first priority lien on all cash, trade accounts receivable, inventory, and other current assets and proceeds thereof, and a second priority lien on all other assets, including fixed assets and intangibles of the Borrower, certain domestic subsidiaries of the Borrower and the guarantors (other than the Company).
Borrowings under the ABL Facility continue to bear interest at rates based upon either a base rate plus an applicable margin of 1.00% or adjusted LIBOR rate plus an applicable margin of 2.00%, in each case, subject to adjustments based upon average availability under the ABL Facility. The New ABL Credit Agreement requires the Borrower to maintain a minimum consolidated fixed charge coverage ratio of 1.0x, tested on a quarterly basis, when Availability plus the amount of Qualified Cash (up to $5.0 million) (as defined in the New ABL Credit Agreement) under the ABL Facility is less than the greater of (i) 10.0% of the Line Cap (as defined in the New ABL Credit Agreement) and (ii) $10.0 million. As of December 31, 2013, no amounts were outstanding under the ABL Facility. As of December 31, 2013, the Company had $150.1 million of unrestricted cash and cash equivalents and $147.5 million of availability under the ABL Facility, net of outstanding letters of credit.
On February 11, 2013, the Company made an $80.0 million voluntary prepayment of debt with available cash on hand that was applied to future principal amortizations on the previous Term Loan Credit Agreement. As a result, the Company wrote off $1.8 million of original issue discount and capitalized debt issuance costs during the first quarter of 2013. On May 2, 2013, the Company made an additional $30.0 million voluntary prepayment of existing debt with available cash on hand. As a result, the Company wrote off $0.9 million of original issue discount and capitalized debt issuance costs during the second quarter of 2013.
In connection with the May 31, 2013 refinancing and in accordance with ASC 470-50, Debt Modifications and Extinguishments, the Company capitalized $21.8 million of new debt issuance costs, recorded $13.8 million of fees paid to creditors as a debt discount, and expensed $7.1 million of transaction fees. The Company evaluated on a lender by lender basis if the debt related to returning lenders was significantly modified or not, resulting in the write-off of $5.5 million in unamortized debt issuance costs and original issue discount relating to the previous Term Loan Credit Agreement and ABL Credit Agreement. Amounts expensed are recorded as a loss on extinguishment of debt in the condensed consolidated statement of comprehensive income for the year ended December 31, 2013. The Company amortizes both the capitalized debt issuance costs and the original issue discount on its loans under the effective interest method.
Covenant compliance
The New Term Loan Credit Agreement contains restrictions on the Borrower’s ability to pay distributions and dividends (but which permitted the payment of the special cash dividend described in Note 12 – Special Cash Dividend of our consolidated financial statements included in Item 8 of this annual report on Form 10-K). Payments can be made by the Borrower to the Company or other parent companies for certain expenses such as operating expenses in the ordinary course, fees and expenses related to any debt or equity offering and to pay franchise or similar taxes. Dividends can be used to repurchase equity interests, subject to limitations in certain circumstances. Additionally, the New Term Loan Credit Agreement restricts the aggregate amount of dividends and distributions that can be paid and, in certain circumstances, requires pro forma compliance with certain fixed charge coverage ratios or gross leverage ratios, as applicable in order to pay certain dividends and distributions. The New Term Loan Credit Agreement also contains other affirmative and negative covenants that, among other things, limit the incurrence of additional indebtedness, liens on property, sale and leaseback transactions, investments, loans and advances, mergers or consolidations, asset sales, acquisitions, transactions with affiliates, prepayments of certain other indebtedness and modifications of our organizational documents. The New Term Loan Credit Agreement does not contain any financial maintenance covenants.
The New Term Loan Credit Agreement contains customary events of default, including, among others, nonpayment of principal, interest or other amounts, failure to perform covenants, inaccuracy of representations or warranties in any material respect, cross-defaults with other material indebtedness, certain undischarged judgments, the occurrence of certain ERISA or bankruptcy or insolvency events or the occurrence of a change in control (defined in the New Term Loan Credit Agreement). A bankruptcy or insolvency event of default will cause the obligations under the New Term Loan Credit Agreement to automatically become immediately due and payable.
The New ABL Credit Agreement also contains covenants and events of default substantially similar to those in the New Term Loan Credit Agreement, as described above.
Contractual obligations
The following table summarizes our expected payments for significant contractual obligations as of December 31, 2013:
(Dollars in thousands)
Payment due by period
|
Contractual obligations
|
|
|
|
Total
|
|
Less than
1 year
|
|
2-3 years
|
|
4-5 years
|
|
After 5
years
|
|
Long-term debt, including current portion(1)
|
|
|
|
|
|
$ |
1,198,824 |
|
|
$ |
13,021 |
|
|
$ |
24,803 |
|
|
$ |
23,999 |
|
|
$ |
1,137,001 |
|
Capital lease obligation, including current portion
|
|
|
|
|
|
|
2,529 |
|
|
|
185 |
|
|
|
389 |
|
|
|
418 |
|
|
|
1,537 |
|
Interest on long-term debt(2)
|
|
|
|
|
|
|
263,935 |
|
|
|
42,316 |
|
|
|
83,417 |
|
|
|
81,560 |
|
|
|
56,642 |
|
Operating leases
|
|
|
|
|
|
|
6,228 |
|
|
|
1,952 |
|
|
|
3,443 |
|
|
|
833 |
|
|
|
- |
|
Total contractual cash obligations(3)
|
|
|
|
|
|
$ |
1,471,516 |
|
|
$ |
57,474 |
|
|
$ |
112,052 |
|
|
$ |
106,810 |
|
|
$ |
1,195,180 |
|
(1) On May 31, 2013, the Borrower amended and restated its then existing Credit Agreement by entering into a new credit agreement (“New Term Loan Credit Agreement”) with certain commercial banks and other lenders. The New Term Loan Credit Agreement provides for a $1,200.0 million term loan credit facility (“New Term Loan”) and a $300.0 million uncommitted incremental term loan facility. The New Term Loan Credit Agreement matures on May 31, 2020.
(2) Assumes normal debt amortization payments until maturity and using interest rates in effect for our New Term Loan Credit Agreement as of December 31, 2013.
(3) Pension obligations are excluded from this table as we are unable to estimate the timing of payment due to the inherent assumptions underlying the obligation. However, the Company estimates we will contribute $2.1 million to our pension plans in 2014.
Capital expenditures
Our operations require capital expenditures for technology, tooling, equipment, capacity expansion and upgrades. Capital expenditures were $30.8 million and $22.4 million for the years ended December 31, 2013 and 2012, respectively, and were funded through cash from operations.
Off-balance sheet arrangements
We have an arrangement with a finance company to provide floor plan financing for selected dealers. This arrangement provides liquidity for our dealers by financing dealer purchases of products with credit availability from the finance company. We receive payment from the finance company after shipment of product to the dealer and our dealers are given a longer period of time to pay the finance provider. If our dealers do not pay the finance company, we may be required to repurchase the applicable inventory held by the dealer. We do not indemnify the finance company for any credit losses they may incur.
Total inventory financed accounted for approximately 7% of net sales for the year ended December 31, 2012 and approximately 8% of net sales for the year ended December 31, 2013. The amount financed by dealers which remained outstanding was $16.6 million and $24.3 million as of December 31, 2012 and 2013, respectively.
Critical accounting policies
In preparing the financial statements in accordance with accounting principles generally accepted in the U.S., management is required to make estimates and assumptions that have an impact on the asset, liability, revenue and expense amounts reported. These estimates can also affect supplemental information disclosures of the Company, including information about contingencies, risk and financial condition. The Company believes, given current facts and circumstances, that its estimates and assumptions are reasonable, adhere to accounting principles generally accepted in the U.S., and are consistently applied. Inherent in the nature of an estimate or assumption is the fact that actual results may differ from estimates and estimates may vary as new facts and circumstances arise. The Company makes routine estimates and judgments in determining net realizable value of accounts receivable, inventories, property, plant and equipment, and prepaid expenses. Management believes the Company’s most critical accounting estimates and assumptions are in the following areas: goodwill and other indefinite-lived intangible asset impairment assessment, business combinations and purchase accounting, defined benefit pension obligations, estimates of allowance for doubtful accounts, excess and obsolete inventory reserves, product warranty, other contingencies, derivative accounting, income taxes, and share based compensation.
Goodwill and other intangible assets
Goodwill represents the excess of the purchase price over fair value of identifiable net assets acquired from business acquisitions. Goodwill is not amortized, but is reviewed for impairment on an annual basis and between annual tests if indicators of impairment are present. The Company evaluates goodwill for impairment annually on October 1 or more frequently when an event occurs or circumstances change that indicates the carrying value may not be recoverable. The Company has the option to assess goodwill for impairment by first performing a qualitative assessment to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount. If the Company determines that it is not more likely than not that the fair value of a reporting unit is less than its carrying amount, then further goodwill impairment testing is not required to be performed. If the Company determines that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, the Company is required to perform a two-step goodwill impairment test. In the first step, the fair value of the reporting unit is compared to its book value including goodwill. If the fair value of the reporting unit is in excess of its book value, the related goodwill is not impaired and no further analysis is necessary. If the fair value of the reporting unit is less than its book value, there is an indication of potential impairment and a second step is performed. When required, the second step of testing involves calculating the implied fair value of goodwill for the reporting unit. The implied fair value of goodwill is determined in the same manner as goodwill recognized in a business combination, which is the excess of the fair value of the reporting unit determined in step one over the fair value of its net assets and identifiable intangible assets as if the reporting unit had been acquired. If the carrying value of the reporting unit's goodwill exceeds the implied fair value of that goodwill, an impairment loss is recognized in an amount equal to that excess. For reporting units with a negative book value (i.e., excess of liabilities over assets), qualitative factors are evaluated to determine whether it is necessary to perform the second step of the goodwill impairment test.
The Company performed the required annual impairment tests for fiscal years 2013, 2012 and 2011 and found no impairment of goodwill.
Other indefinite-lived intangible assets consist of trade names. The Company tests the carrying value of these trade names by comparing the assets fair value to its carrying value. Fair value was measured using a relief-from-royalty approach, which assumes the fair value of the trade name is the discounted cash flows of the amount that would be paid had the Company not owned the trade name and instead licensed the trade name from another company. The Company conducts its annual impairment test for indefinite-lived intangible assets on October 31st of each year.
The Company performed the required annual impairment tests for fiscal years 2013 and 2012 and found no impairment of indefinite-lived trade names. During the fourth quarter of 2011, the Company decided to strategically transition certain products to their more widely known Generac brand. Based on this decision, the Company recorded a $9.4 million non-cash trade name impairment charge as of October 31, 2011 which primarily related to the write down of the impacted trade name to net realizable value.
We can make no assurances that remaining goodwill or indefinite-lived trade names will not be impaired in the future. When preparing a discounted cash flow analysis, we make a number of key estimates and assumptions. We estimate the future cash flows of the business based on historical and forecasted revenues and operating costs. This, in turn, involves further estimates, such as estimates of future growth rates and inflation rates. In addition, we apply a discount rate to the estimated future cash flows for the purpose of the valuation. This discount rate is based on the estimated weighted average cost of capital for the business and may change from year to year. Weighted average cost of capital includes certain assumptions such as market capital structures, market betas, risk-free rate of return and estimated costs of borrowing. Changes in these key estimates and assumptions, or in other assumptions used in this process, could materially affect our impairment analysis for a given year. Additionally, since our measurement also considers a market approach, changes in comparable public company multiples can also materially impact our impairment analysis.
In the long term, our remaining goodwill and indefinite-lived trade name balances could be further impaired in future periods. A number of factors, many of which we have no ability to control, could affect our financial condition, operating results and business prospects and could cause actual results to differ from the estimates and assumptions we employed. These factors include:
·
|
a prolonged global economic crisis;
|
·
|
a significant decrease in the demand for our products;
|
·
|
the inability to develop new and enhanced products and services in a timely manner;
|
·
|
a significant adverse change in legal factors or in the business climate;
|
·
|
an adverse action or assessment by a regulator; and
|
·
|
successful efforts by our competitors to gain market share in our markets.
|
Our cash flow assumptions are based on historical and forecasted revenue, operating costs and other relevant factors. If management's estimates of future operating results change or if there are changes to other assumptions, the estimate of the fair value of our business may change significantly. Such change could result in impairment charges in future periods, which could have a significant impact on our operating results and financial condition.
Business combinations and purchase accounting
We account for business combinations using the acquisition method of accounting, and accordingly, the assets and liabilities of the acquired business are recorded at their respective fair values. The excess of the purchase price over the estimated fair value is recorded as goodwill. Assigning fair market values to the assets acquired and liabilities assumed at the date of an acquisition requires knowledge of current market values, and the values of assets in use, and often requires the application of judgment regarding estimates and assumptions. While the ultimate responsibility resides with management, for material acquisitions we retain the services of certified valuation specialists to assist with assigning estimated values to certain acquired assets and assumed liabilities, including intangible assets and tangible long-lived assets. Acquired intangible assets, excluding goodwill, are valued using certain discounted cash flow methodologies based on future cash flows specific to the type of intangible asset purchased. This methodology incorporates various estimates and assumptions, the most significant being projected revenue growth rates, earnings margins, and forecasted cash flows based on the discount rate and terminal growth rate.
Defined benefit pension obligations
The funded status of our pension plans is more fully described in Note 9 to our audited consolidated financial statements included in Item 8 of this Annual Report on Form 10-K. The Company’s pension benefit obligation and related pension expense or income are calculated in accordance with ASC 715-30, Defined Benefit Plans—Pension, and are impacted by certain actuarial assumptions, including the discount rate and the expected rate of return on plan assets.
Rates are evaluated on an annual basis considering such factors as market interest rates and historical asset performance. Actuarial valuations for fiscal year 2013 used a discount rate of 4.98% for the salaried pension plan and 5.01% for the hourly pension plan. Our discount rate was selected using a methodology that matches plan cash flows with a selection of “Aa” or higher rated bonds, resulting in a discount rate that better matches a bond yield curve with comparable cash flows. In estimating the expected return on plan assets, we study historical markets and preserve the long-term historical relationships between equities and fixed-income securities. We evaluate current market factors such as inflation and interest rates before we determine long-term capital market assumptions and review peer data and historical returns to check for reasonableness and appropriateness. Changes in the discount rate and return on assets can have a significant effect on the funded status of our pension plans, stockholders' equity and related expense. We cannot predict these changes in discount rates or investment returns and, therefore, cannot reasonably estimate whether the impact in subsequent years will be significant.
The funded status of our pension plans is the difference between the projected benefit obligation and the fair value of its plan assets. The projected benefit obligation is the actuarial present value of all benefits expected to be earned by the employees' service. No compensation increase is assumed in the calculation of the projected benefit obligation, as the plans were frozen effective December 31, 2008.
Our funding policy for our pension plans is to contribute amounts at least equal to the minimum annual amount required by applicable regulations. Given this policy, we expect to make $2.1 million in contributions to our pension plans in 2014.
Allowance for doubtful accounts, excess and obsolete inventory reserves, product warranty reserves and other contingencies
The reserves, if any, for customer rebates, product warranty, product liability, litigation, excess and obsolete inventory and doubtful accounts are fact-specific and take into account such factors as specific customer situations, historical experience, and current and expected economic conditions. These reserves are reflected under Notes 2, 4, 5 and 14 to our audited consolidated financial statements included in Item 8 of this Annual Report on Form 10-K.
Derivative accounting
We enter into interest rate swap contracts, or Swaps, to fix a portion of our variable rate indebtedness. Due to the incorporation of a new interest rate floor provision in the Term Loan Credit Agreement, which constituted a change in critical terms, the Company concluded that as of May 30, 2012, the Swaps outstanding at that time would no longer be highly effective in achieving offsetting changes in cash flows during the periods the hedges are designated. As a result, the Company was required to de-designate the hedges as of May 30, 2012. Beginning May 31 2012, the effective portion of the swaps prior to the change (i.e. amounts previously recorded in Accumulated Other Comprehensive Loss) were amortized into interest expense over the period of the originally designated hedged transactions which had various dates through October 2013. Subsequent changes in fair value of the related swaps were immediately recognized in the consolidated statements of comprehensive income as interest expense.
As required by ASC 815 Derivatives and Hedging, we record the Swaps at fair value pursuant to ASC 820 Fair Value Measurements and Disclosures, which defines fair value, establishes a consistent framework for measuring fair value and expands disclosure for each major asset and liability category measured at fair value. When determining the fair value of the Swaps, we considered our credit risk in accordance with ASC 820. The fair value of our outstanding Swaps, including the impact of credit risk, at December 31, 2013 and 2012 was an asset of $1.2 million and a liability of $3.0 million, respectively.
Income taxes
We account for income taxes in accordance with ASC 740 Income Taxes. Our estimate of income taxes payable, deferred income taxes and the effective tax rate is based on an analysis of many factors including interpretations of federal, state and international income tax laws, the difference between tax and financial reporting bases of assets and liabilities, estimates of amounts currently due or owed in various jurisdictions, and current accounting standards. We review and update our estimates on a quarterly basis as facts and circumstances change and actual results are known.
We have generated significant deferred tax assets as a result of goodwill and intangible asset book versus tax differences. In assessing the realizability of these deferred tax assets, we consider whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the years in which those temporary differences become deductible. We consider the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies in making this assessment. As of September 30, 2011, we were in a three year cumulative loss position and had a full valuation allowance recorded against our net deferred tax assets. In the fourth quarter of 2011, we came out of a three-year cumulative loss position and, as part of the normal assessment of the future realization of our net deferred tax assets, determined that a valuation allowance was no longer required. As a result, the valuation allowance previously recorded was reversed in the fourth quarter of 2011 and was recorded as a component of the income tax provision.
Ottomotores Brazil, acquired in the Ottomotores acquisition in December 2012, is in a three-year cumulative net loss position and therefore we have not considered expected future taxable income in analyzing the realizability of their deferred tax assets as of December 31, 2013. As a result, a full valuation allowance was recorded against the deferred tax assets of Ottomotores Brazil.
In performing the assessment of the realization of our deferred tax assets as of December 31, 2013, excluding Ottomotores Brazil, we have determined that it is more likely than not that our deferred tax assets will be realized, and therefore no valuation allowance is required.
Share based compensation
Under the fair value recognition provisions of ASC 718 Compensation – Stock Compensation, share based compensation cost is measured at the grant date based on the fair value of the award and is recognized as expense over the requisite service period. Determining the fair value of share based awards at the grant date requires judgment, including estimating expected dividends and market volatility of our stock. In addition, judgment is also required in estimating the amount of share based awards that are expected to be forfeited. If actual results differ significantly from these estimates, share based compensation expense and our results of operations could be impacted.
New Accounting Standards
For information with respect to new accounting pronouncements and the impact of these pronouncements on our consolidated financial statements, we refer you to Note 2, “New Accounting Pronouncements,” of our consolidated financial statements included in Item 8 of this Annual Report on Form 10-K.
We are exposed to market risk from changes in foreign currency exchange rates, commodity prices and interest rates. To reduce the risk from changes in certain foreign currency exchange rates and commodity prices, we use financial instruments from time to time. We do not hold or issue financial instruments for trading purposes.
Foreign currency
We are exposed to foreign currency exchange risk as a result of purchasing from suppliers in other countries as well as operating businesses in foreign countries. Periodically, we utilize foreign currency forward purchase and sales contracts to manage the volatility associated with foreign currency purchases in the normal course of business. Contracts typically have maturities of one year or less. Realized and unrealized gains and losses on transactions denominated in foreign currency are recorded in earnings as a component of cost of goods sold. At December 31, 2012, we had no foreign exchange contracts outstanding. As of December 31, 2013, we had the following foreign currency contracts outstanding (in thousands):
Currency Denomination
|
|
|
Effective Date
|
Notional Amount
(Thousands)
|
|
Expiration Date
|
Number of Contracts Outstanding
|
Contract Date
|
Exchange Rate
|
USD
|
3
|
October 23, 2013
|
Various effective dates between 4/1/2014 and 7/14/2014
|
650
|
(EUR:USD)
1.349-1.3515
|
May 28, 2014 – October 31, 2014
|
GBP
|
4
|
October 23, 2013
|
Various effective dates between 2/3/2014 and 5/2/2014
|
4,000
|
(EUR:GBP)
0.8384-0.8492
|
April 30, 2014 – July 31, 2014
|
With the purchase of the Ottomotores businesses in December 2012 and the Tower Light business in August 2013, a small portion of revenues and expenses are now denominated in Euros, Mexican Pesos, Brazilian Real and British Pounds.
Commodity prices
We are a purchaser of commodities and of components manufactured from commodities, including steel, aluminum, copper and others. As a result, we are exposed to fluctuating market prices for those commodities. While such materials are typically available from numerous suppliers, commodity raw materials are subject to price fluctuations. We generally buy these commodities and components based upon market prices that are established with the supplier as part of the purchase process. Depending on the supplier, these market prices may reset on a periodic basis based on negotiated lags. To the extent that commodity prices increase and we do not have firm pricing from our suppliers, or our suppliers are not able to honor such prices, we may experience a decline in our gross margins to the extent we are not able to increase selling prices of our products or obtain manufacturing efficiencies or supply chain savings to offset increases in commodity costs.
Periodically, we engage in certain commodity risk management activities. The primary objectives of these activities are to understand and mitigate the impact of potential price fluctuations on our financial results. Generally, these risk management transactions will involve the use of commodity derivatives to protect against exposure resulting from significant price fluctuations.
We primarily utilize commodity contracts with maturities of one year or less. These are intended to offset the effect of price fluctuations on actual inventory purchases. The primary objective of the hedge is to mitigate the impact of potential price fluctuations of commodity on our financial results. As of December 31, 2013, we had the following commodity forward contracts outstanding (in thousands):
Hedged Item
|
Number of Contracts Outstanding
|
Effective Date
|
Aggregate Notional Amount
(Thousands)
|
Fixed Copper Price
|
Copper
|
1
|
October 1, 2013 to June 30, 2014
|
$2,169
|
$3.12 per LB
|
For additional information on the Company’s commodity forward contracts, including amounts charged to the statement of comprehensive income during 2013, see Note 2 to our audited consolidated financial statements included in Item 8 of this Annual Report on Form 10-K.
Interest rates
As of December 31, 2013, all of the outstanding debt under our term loans was subject to floating interest rate risk. As of this date, we had the following interest rate swap contracts outstanding (in thousands):
Hedged Item
|
|
Effective Date
|
Notional Amount
(Thousands)
|
|
Expiration Date
|
Contract Date
|
Fixed LIBOR Rate
|
Interest rate
|
October 23, 2013
|
July 1, 2014
|
$100,000
|
1.742%
|
July 1, 2018
|
Interest rate
|
October 23, 2013
|
July 1, 2014
|
$100,000
|
1.737%
|
July 1, 2018
|
At December 31, 2013, the fair value of the swaps reduced for our credit risk and excluding any related accrued interest was an asset of $1.2 million. For additional information on the Company’s interest rate swaps, including amounts charged to the statement of comprehensive income during 2013, see Note 2 to our audited consolidated financial statements included in Item 8 of this Annual Report on Form 10-K. Even after giving effect to these swaps, we are exposed to risks due to changes in interest rates with respect to the portion of our term loans that are not covered by the swaps. A hypothetical change in the LIBOR interest rate of 100 basis points would have changed annual cash interest expense by approximately $4.9 million (or, without the swaps in place, $5.9 million). The existence of a 0.75% LIBOR floor provision in our New Term Loan Credit Agreement, effective May 31, 2013, limits the impact of a hypothetical 100 basis point change in LIBOR at current December 31, 2013 LIBOR rates.
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Stockholders of Generac Holdings Inc.
We have audited Generac Holdings Inc.’s internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 Framework) (the COSO criteria). Generac Holdings Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
As indicated in the accompanying Management’s Report on Internal Control Over Financial Reporting, management’s assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of the Tower Light or Baldor Generators businesses, which are included in the December 31, 2013 consolidated financial statements of Generac Holdings Inc. and constituted 4.2% and 15.1% of total and net assets, respectively, as of December 31, 2013 and 2.8% and 1.0% of revenues and net income, respectively, for the year then ended. Our audit of internal control over financial reporting of Generac Holdings Inc. also did not include an evaluation of the internal control over financial reporting of Tower Light or Baldor Generators.
In our opinion, Generac Holdings Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2013, based on the COSO criteria.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets as of December 31, 2013 and 2012, and related consolidated statements of comprehensive income, stockholders' equity and cash flows for each of the three years in the period ended December 31, 2013 of Generac Holdings Inc. and our report dated March 3, 2014 expressed an unqualified opinion thereon.
/s/ Ernst & Young LLP
Milwaukee, WI, USA
March 3, 2014
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Stockholders of Generac Holdings Inc.
We have audited the accompanying consolidated balance sheets of Generac Holdings Inc. (the Company) as of December 31, 2013 and 2012, and the related consolidated statements of comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2013. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Generac Holdings Inc. at December 31, 2013 and 2012, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2013, in conformity with U.S. generally accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Generac Holdings Inc.’s internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 Framework) and our report dated March 3, 2014 expressed an unqualified opinion thereon.
/s/ Ernst & Young LLP
Milwaukee, WI, USA
March 3, 2014
Generac Holdings Inc.
|
Consolidated Balance Sheets
|
(Dollars in Thousands, Except Share and Per Share Data)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
December 31,
|
|
|
|
2013
|
|
|
2012
|
|
Assets
|
|
|
|
|
|
|
Current assets:
|
|
|
|
|
|
|
Cash and cash equivalents
|
|
$ |
150,147 |
|
|
$ |
108,023 |
|
Restricted cash
|
|
|
6,645 |
|
|
|
– |
|
Accounts receivable, less allowance for doubtful accounts of $2,658 at December 31, 2013 and $1,166 at December 31, 2012
|
|
|
164,907 |
|
|
|
134,978 |
|
Inventories
|
|
|
300,253 |
|
|
|
225,817 |
|
Deferred income taxes
|
|
|
26,869 |
|
|
|
48,687 |
|
Prepaid expenses and other assets
|
|
|
5,358 |
|
|
|
5,048 |
|
Total current assets
|
|
|
654,179 |
|
|
|
522,553 |
|
|
|
|
|
|
|
|
|
|
Property and equipment, net
|
|
|
146,390 |
|
|
|
104,718 |
|
|
|
|
|
|
|
|
|
|
Customer lists, net
|
|
|
42,764 |
|
|
|
37,823 |
|
Patents, net
|
|
|
62,418 |
|
|
|
70,302 |
|
Other intangible assets, net
|
|
|
4,447 |
|
|
|
5,783 |
|
Deferred financing costs, net
|
|
|
20,051 |
|
|
|
13,987 |
|
Trade names, net
|
|
|
173,196 |
|
|
|
158,831 |
|
Goodwill
|
|
|
608,287 |
|
|
|
552,943 |
|
Deferred income taxes
|
|
|
85,104 |
|
|
|
136,754 |
|
Other assets
|
|
|
1,369 |
|
|
|
153 |
|
Total assets
|
|
$ |
1,798,205 |
|
|
$ |
1,603,847 |
|
|
|
|
|
|
|
|
|
|
Liabilities and stockholders’ equity
|
|
|
|
|
|
|
|
|
Current liabilities:
|
|
|
|
|
|
|
|
|
Short-term borrowings
|
|
$ |
9,575 |
|
|
$ |
12,550 |
|
Accounts payable
|
|
|
109,238 |
|
|
|
94,543 |
|
Accrued wages and employee benefits
|
|
|
26,564 |
|
|
|
19,435 |
|
Other accrued liabilities
|
|
|
92,997 |
|
|
|
86,081 |
|
Current portion of long-term borrowings and capital lease obligations
|
|
|
12,471 |
|
|
|
82,250 |
|
Total current liabilities
|
|
|
250,845 |
|
|
|
294,859 |
|
|
|
|
|
|
|
|
|
|
Long-term borrowings and capital lease obligations
|
|
|
1,175,349 |
|
|
|
799,018 |
|
Other long-term liabilities
|
|
|
54,940 |
|
|
|
46,342 |
|
Total liabilities
|
|
|
1,481,134 |
|
|
|
1,140,219 |
|
|
|
|
|
|
|
|
|
|
Stockholders’ equity:
|
|
|
|
|
|
|
|
|
Common stock, par value $0.01, 500,000,000 shares authorized, 68,767,367 and 68,295,960 shares issued at December 31, 2013 and 2012, respectively
|
|
|
688 |
|
|
|
683 |
|
Additional paid-in capital
|
|
|
421,672 |
|
|
|
743,349 |
|
Treasury stock, at cost, 163,458 and 0 shares, respectively
|
|
|
(6,571 |
) |
|
|
– |
|
Excess purchase price over predecessor basis
|
|
|
(202,116 |
) |
|
|
(202,116 |
) |
Retained earnings (accumulated deficit)
|
|
|
105,813 |
|
|
|
(63,792 |
) |
Accumulated other comprehensive loss
|
|
|
(2,415 |
) |
|
|
(14,496 |
) |
Total stockholders’ equity
|
|
|
317,071 |
|
|
|
463,628 |
|
|
|
|
|
|
|
|
|
|
Total liabilities and stockholders’ equity
|
|
$ |
1,798,205 |
|
|
$ |
1,603,847 |
|
|
|
|
|
|
|
|
|
|
See notes to consolidated financial statements.
|
|
|
|
|
|
|
|
|
Generac Holdings Inc.
|
Consolidated Statements of Comprehensive Income
|
(Dollars in Thousands, Except Share and Per Share Data)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
|
|
2013
|
|
|
2012
|
|
|
2011
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net sales
|
|
$ |
1,485,765 |
|
|
$ |
1,176,306 |
|
|
$ |
791,976 |
|
Costs of goods sold
|
|
|
916,205 |
|
|
|
735,906 |
|
|
|
497,322 |
|
Gross profit
|
|
|
569,560 |
|
|
|
440,400 |
|
|
|
294,654 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating expenses:
|
|
|
|
|
|
|
|
|
|
|
|
|
Selling and service
|
|
|
107,515 |
|
|
|
101,448 |
|
|
|
77,776 |
|
Research and development
|
|
|
29,271 |
|
|
|
23,499 |
|
|
|
16,476 |
|
General and administrative
|
|
|
55,490 |
|
|
|
46,031 |
|
|
|
30,012 |
|
Amortization of intangibles
|
|
|
25,819 |
|
|
|
45,867 |
|
|
|
48,020 |
|
Trade name write-down
|
|
|
– |
|
|
|
– |
|
|
|
9,389 |
|
Total operating expenses
|
|
|
218,095 |
|
|
|
216,845 |
|
|
|
181,673 |
|
Income from operations
|
|
|
351,465 |
|
|
|
223,555 |
|
|
|
112,981 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other (expense) income:
|
|
|
|
|
|
|
|
|
|
|
|
|
Interest expense
|
|
|
(54,435 |
) |
|
|
(49,114 |
) |
|
|
(23,718 |
) |
Loss on extinguishment of debt
|
|
|
(15,336 |
) |
|
|
(14,308 |
) |
|
|
(377 |
) |
Investment income
|
|
|
91 |
|
|
|
79 |
|
|
|
110 |
|
Costs related to acquisition
|
|
|
(1,086 |
) |
|
|
(1,062 |
) |
|
|
(875 |
) |
Other, net
|
|
|
(1,983 |
) |
|
|
(2,798 |
) |
|
|
(1,155 |
) |
Total other expense, net
|
|
|
(72,749 |
) |
|
|
(67,203 |
) |
|
|
(26,015 |
) |
|
|
|
|
|
|
|
|
|
|
|
|
|