Sign In  |  Register  |  About Mill Valley  |  Contact Us

Mill Valley, CA
September 01, 2020 1:29pm
7-Day Forecast | Traffic
  • Search Hotels in Mill Valley

  • CHECK-IN:
  • CHECK-OUT:
  • ROOMS:

Kronos Fusion Energy Announces the Establishment of the World’s First Fusion Energy Component Factory in India

By: Get News

February 12, 2024 - Los Angeles, California, USA - Kronos Fusion Energy, a leading innovator in the fusion energy sector from California, is excited to announce a groundbreaking initiative: the launch of the world's first Fusion Energy Component factory, set to be strategically located in India. This landmark project represents a significant milestone in the journey towards a sustainable and renewable energy future, poised to make a profound impact on the global energy landscape. By harnessing the transformative power of fusion energy, Kronos Fusion Energy is dedicated to reducing global emissions by an impressive 25%, inspired by the limitless energy generation of the sun.

Central to our vision is the achievement of an unparalleled levelized cost of electricity (LCOE) of less than 40 cents per kWh, establishing a new benchmark for affordable clean energy across the globe. This ambitious objective, combined with our commitment to significantly reduce global emissions, places Kronos Fusion Energy at the forefront of the transition towards energy solutions that are not only environmentally friendly but also economically viable and perpetually renewable. Through the innovation of fusion technology, we are not just emulating the sun's energy production method; we are initiating a new era in human history where access to clean, abundant energy becomes achievable for everyone. 

A key component of our strategy involves the design and development of our components in California, coupled with the expansion of our supply chain and manufacturing efforts in India. This approach not only enhances the global fusion energy infrastructure but also highlights our dedication to building a comprehensive fusion energy ecosystem. By forging partnerships with over 30 companies in India, we are not just constructing a factory; we are creating a collaborative network that will drive the advancement and scalability of fusion technology worldwide. These partnerships will enable us to serve Kronos Fusion Energy's customers and provide essential components to other fusion energy enterprises, promoting a unified effort to accelerate the global adoption of fusion energy.

Scaling Up Fusion Energy: A Crucial Step Against Climate Change

The parallel between fusion energy and the aviation industry extends into the realm of scalability and its critical role in combating climate change. Just as the aviation industry underwent expansive growth to meet global travel demands, fusion energy requires large-scale commercialization to effectively tackle the urgent challenges posed by climate change. Kronos Fusion Energy recognizes that the fight against global warming hinges on our ability to rapidly scale up fusion technology, transitioning from experimental and prototype stages to widespread industrial production. This upscaling is not just a technological endeavor but a global imperative to drastically reduce carbon emissions and reverse the tide of climate change.

The Imperative of Fusion Energy Commercialization

The commercialization of fusion energy on a massive scale is more than an ambitious goal – it's a necessity in our collective efforts to address climate change. To realize the full potential of fusion energy in reducing global emissions, it is essential to transition from small-scale projects to large, commercially viable fusion power plants. This shift will require concerted efforts in innovation, investment, and international collaboration, paralleling the comprehensive strategies that propelled the aviation industry to its current heights. By embracing the challenge of large-scale fusion energy commercialization, Kronos Fusion Energy aims to lead the way in providing a sustainable, clean energy source that can significantly mitigate the impacts of climate change, while powering the future in a responsible and efficient manner.

India's Pivotal Role in the Fusion Energy Frontier

The decision to establish the world's inaugural Fusion Energy Component factory in India is not just a strategic move but a visionary one, positioning India at the epicenter of the global fusion energy innovation map. This significant investment by Kronos Fusion Energy in India marks a transformative phase in the country's energy landscape, elevating its status as a key player in the international energy domain. India's rich history of scientific innovation, coupled with its rapidly growing technological capabilities, makes it an ideal location for pioneering the future of fusion energy.

This groundbreaking project in India is emblematic of the collaborative essence inherent in fusion energy research and development. It is a testament to the global commitment towards creating a sustainable energy future, transcending geographical and political boundaries. By bringing this revolutionary technology to India, Kronos Fusion Energy is not only contributing to the nation's economic growth and technological advancement but also playing a pivotal role in diversifying the global energy portfolio. This move significantly reduces the world's reliance on traditional, finite energy resources, paving the way for a more stable and sustainable energy future.

Moreover, the establishment of this factory in India serves as a catalyst for international cooperation in fusion energy research and development. It encourages the sharing of knowledge, expertise, and resources across borders, fostering a global community united in the pursuit of clean, limitless, and safe energy. This international collaboration is essential in overcoming the technical and economic challenges of fusion energy, accelerating its development and commercialization on a global scale.

Kronos's Vision: Advancing Aneutronic Fusion for a Sustainable Future

Kronos Fusion Energy is at the forefront of pioneering aneutronic fusion energy, leveraging helium-3 to unlock the ultimate stage of fusion technology—its steady-state commercial application. This innovative approach to fusion energy is not just our mission; it's a testament to our belief in a sustainable, efficient, and safe energy future. Our commitment to aneutronic fusion is driven by three core advantages that set it apart as the definitive solution for clean energy:

  1. Zero Neutron Emission: Our cutting-edge Kronos S.M.A.R.T. technology eliminates the production of neutrons, a hallmark of aneutronic fusion. This absence of neutron emission significantly enhances safety and operational efficiency by negating the need for extensive radiation shielding, setting a new standard for clean energy production.
  2. Flexible Modularity and Scalability: The safety profile of aneutronic fusion allows for an unprecedented level of modularity in our systems. This means we can design and deploy fusion energy solutions that range from small-scale community grids to large-scale industrial complexes, offering versatile and adaptable energy solutions for a wide array of applications.
  3. Direct Energy Conversion Efficiency: Aneutronic fusion introduces the revolutionary process of direct energy conversion, transforming fusion energy directly into electricity without the intermediary heat cycle. This breakthrough significantly increases efficiency and dramatically reduces infrastructure costs, marking a major leap forward in energy generation technology.


The establishment of our Fusion Energy Component factory in India is a strategic step that aligns perfectly with our goal of achieving an LCOE of less than 40 cents per kWh. This facility will not only serve as a cornerstone to produce essential components designed in California but will also play a crucial role in enhancing our supply chain efficiency and production scalability. By localizing component manufacturing and leveraging India's advanced manufacturing capabilities, we are set to significantly reduce production costs and streamline operations, further propelling us towards our ambitious LCOE target.

This strategic expansion into India amplifies our ability to deliver on the promise of aneutronic fusion as the future of clean energy. It embodies our dedication to not only achieving technological breakthroughs but also ensuring the economic viability of fusion energy on a global scale. Through this endeavor, Kronos Fusion Energy is not just championing a cleaner, safer energy source but is also paving the way for affordable access to fusion energy worldwide, marking a significant milestone in our journey towards a sustainable energy future.

Components: Crafting the Future of Fusion Energy

At the heart of Kronos Fusion Energy's groundbreaking venture in India lies the production of ten critical components, each meticulously designed in California and destined to be crafted with unparalleled precision and quality in our Indian factory. These components are the cornerstone upon which the successful implementation of fusion energy rests, representing the very essence of innovation and engineering excellence. Here is a closer look at the vital elements that will power the future of sustainable fusion energy:

  1. Vacuum Enclosures: Engineered to create the perfect vacuum environment necessary for fusion reactions, these enclosures ensure the highest purity and containment standards.
  2. Plasma Confinement Systems: These systems are designed to maintain plasma stability and integrity, critical for achieving sustained fusion reactions.
  3. Magnetic Coils: Employing cutting-edge designs, these coils generate the magnetic fields essential for the confinement and control of plasma within the reactor.
  4. Central Solenoids: Acting as the backbone of plasma control, central solenoids drive and shape the plasma, ensuring optimal conditions for fusion.
  5. Divertors with Direct Energy Conversion Capability: A key innovation, these divertors not only manage waste material from the fusion process but also convert fusion energy directly into electricity, enhancing efficiency.
  6. Neutral Beam Injectors: These injectors heat the plasma to the necessary temperatures for fusion through precise beams of neutral particles.
  7. Radiofrequency (RF) Heating Systems: Supplementing plasma heating, RF systems use electromagnetic waves to elevate plasma temperatures further, crucial for initiating fusion.
  8. Diagnostic Systems: Advanced diagnostic tools continuously monitor and analyze the plasma, ensuring safety and optimal performance of the fusion reaction.
  9. Cryogenic Cooling Systems: These systems maintain the superconducting components at operational temperatures, ensuring the integrity and efficiency of the magnetic confinement.
  10. Power Supply and Control Systems: The backbone of the reactor's operational integrity, these systems provide stable power and control over all aspects of the fusion process.


Each of these components is a testament to Kronos Fusion Energy's dedication to advancing the frontiers of fusion technology. By establishing production capabilities in India, we are not just creating a factory; we are setting up a beacon of innovation and excellence that will illuminate the path to a sustainable energy future. This strategic move not only showcases our commitment to global collaboration and technological prowess but also brings us one step closer to realizing the dream of clean, limitless energy for all.

Environmental Impact: Pioneering a Greener Tomorrow

The transformative potential of fusion energy in mitigating climate change is immense. With its ability to reduce global emissions by 25% within the next three decades, fusion energy emerges as a critical solution to some of the most pressing environmental challenges of our time. This initiative by Kronos Fusion Energy is set to significantly contribute to a more sustainable and cleaner planet, fostering a shift in the global energy dynamics from competition over scarce resources to a collaborative approach based on shared, virtually limitless energy. This monumental shift is not only about preserving our environment but also about building a foundation for lasting global peace and prosperity.

Kronos Fusion Energy: Spearheading the Clean Energy Revolution with a Team of Visionaries

May 28, 2023 – In a bold move towards sustainable energy, Kronos Fusion Energy, under the leadership of Priyanca Iyengar Ford, is pioneering the development of the S.M.A.R.T. 40 fusion energy generator, marking a significant leap towards realizing clean, limitless energy. This ambitious project is powered by a diverse team of world-renowned scientists and experts, each contributing their profound knowledge and innovative thinking to overcome the complexities of fusion energy.

A Vanguard of Scientific Excellence - At the core of Kronos Fusion Energy’s scientific breakthroughs is the Fusion Energy Sciences Advisory Board, a distinguished group of global pioneers guiding the company's scientific direction. This board includes:

  • Paul Weiss in Material Sciences and Nanotechnology, bringing over 400 research publications and more than 40 patents to the project.
  • Konstantin Batygin, an astronomer and Professor of Planetary Sciences at Caltech, contributing his deep understanding of pure mathematics and physics.
  • Bob Weggel and Ruben Fair, experts in magnet design and magnetic shielding, whose work is instrumental in the development of the S.M.A.R.T. 40 fusion energy generator.
  • Siegfried Glenzer, a renowned plasma physicist whose expertise in high-power lasers and x-ray beams is vital for advancing fusion technology.
  • Carl Weggel, specializing in tokamak and fusion generator design, leading the design efforts for the S.M.A.R.T. 40 fusion energy generator.
  • Martin Owens, the Chief Strategy Officer, brings his extensive knowledge in advanced nuclear reactors, adding a strategic depth to the project.
  • Dr. Frank J. Wessel, specializing in plasma physics and fusion energy generation, whose research enhances the project's scientific foundation.
  • Gerald Kulcinski, the Grainger Professor of Nuclear Engineering-Emeritus and Director Emeritus at the Fusion Technology Institute, whose research in developing fusion reactors using advanced fuels such as D-3He is crucial for the project. Kulcinski's work on magnetic/inertial fusion reactor systems, radiation damage, and the potential for lunar mining of helium-3 adds a unique perspective to the fusion energy discussion.


Leading with Vision and Passion

At the forefront of Kronos Fusion Energy's ambitious journey stands its founder, Priyanca Iyengar Ford, a visionary leader whose passion for sustainable energy solutions is the driving force behind the company's innovative strides. Born in Bangalore, India, Priyanca's early fascination with sustainable energy has blossomed into a career dedicated to pioneering clean, limitless fusion energy technology. With over 17 years of diverse experience spanning product management, statistical data analysis, and a profound grasp of market dynamics, Priyanca's leadership is characterized by strategic foresight and an unwavering commitment to excellence.

Her educational journey, marked by an Executive MBA/PLD from Harvard Business School, has equipped her with the necessary tools to navigate the complexities of the fusion energy industry. Priyanca's tenure at Edison International, where she spearheaded energy simulations, ignited her enduring interest in fusion energy. Further deepening her technological expertise, Priyanca has been at the forefront of utilizing quantum computing for fusion energy simulations, showcasing her innovative approach to solving energy challenges.

Priyanca's illustrious career, which includes significant contributions to multinational corporations such as Samsung Electronics, The Walt Disney Company, and Deloitte Consulting, reflects her broad vision and capability to foster innovation across various sectors. As the leader of Kronos Fusion Energy, Priyanca embodies the spirit of collaboration and determination, guiding her team toward the monumental goal of achieving Q40 fusion energy mechanical gain, thereby revolutionizing the energy landscape for future generations.

A Unified Quest for Sustainability

Achieving a Q-factor of 40 in fusion energy marks a pivotal milestone in the quest for a sustainable energy future, signifying that the energy produced by a fusion reactor is forty times greater than the energy consumed to initiate and sustain the fusion process. This ambitious goal underlines not just a leap in scientific achievement and technological innovation but also highlights the critical role of manufacturing and supply chain capabilities. In this context, Kronos Fusion Energy's strategic establishment of component factories in India is a key element in the journey towards achieving Q40, demonstrating a holistic approach to overcoming the challenges of fusion energy production.

India, with its robust manufacturing sector and growing expertise in high-tech industries, provides an ideal setting for the development and production of essential fusion reactor components. The strategic decision to locate component factories within the country leverages India's advanced manufacturing capabilities, skilled workforce, and innovative technological landscape. This approach ensures the production of high-quality, precision-engineered components crucial for the construction and operation of efficient and effective fusion reactors.

The factories in India are set to specialize in several vital areas:

  1. Advanced Materials Manufacturing: These facilities focus on producing materials capable of withstanding the extreme conditions of fusion reactors, such as high temperatures and intense radiation. The use of advanced materials, including tritium for fuel, superconducting magnets for plasma containment, and heat-resistant alloys for reactor walls, is essential for a high Q-factor fusion reactor.
  2. Precision Engineering Components: The precision engineering required for fusion reactor components, such as vacuum systems, cooling systems, and diagnostics equipment, demands a high level of expertise and technological capability. Indian factories are equipped to meet these demands, ensuring that components meet the exacting specifications necessary for optimal reactor performance.
  3. Sustainable Production Practices: Emphasizing sustainability, these factories are designed to minimize environmental impact through responsible sourcing of materials, efficient manufacturing processes, and adherence to environmental regulations. This approach aligns with the broader goal of fusion energy to provide a clean and limitless source of power.
  4. Supply Chain Resilience: By establishing a localized supply chain, Kronos Fusion Energy ensures the reliable and timely delivery of critical components. This strategic positioning mitigates risks associated with global supply chain disruptions and ensures a steady progress towards the Q40 objective.
  5. Collaboration and Innovation: The presence of component factories in India fosters a collaborative ecosystem, bringing together researchers, engineers, and industry professionals. This environment is conducive to innovation, allowing for the continuous improvement of technologies and processes essential to fusion energy development.


Kronos Fusion Energy's component factories in India are not just manufacturing hubs; they represent a strategic asset in the global effort to achieve fusion energy viability. By combining India's manufacturing prowess with cutting-edge fusion energy research, Kronos Fusion Energy is setting the stage for a future where clean, sustainable, and abundant energy is a reality. The journey towards Q40 is complex and challenging, but with the support of our Indian factories and the global fusion energy community, it is a goal within reach, promising a transformative impact on the world's energy landscape.

Global Collaboration: Charting a Course Towards a Unified Future

In the spirit of unity and progress, Kronos Fusion Energy's venture in India exemplifies the boundless potential of international cooperation in the realm of sustainable energy. This endeavor is not just about harnessing the power of fusion energy; it's a beacon of hope for the world, showcasing how collaboration across borders can lead to transformative breakthroughs for humanity. By integrating India's rich tradition of scientific excellence and innovation with global technological advancements, we are not only advancing towards achieving the monumental Q-factor of 40 but also paving the way for a future where clean, limitless energy is a reality for all.

As we embark on this journey, our initiative stands as a testament to the power of collective ambition and shared vision. It's a call to action for nations, researchers, and industries around the world to unite in the quest for a sustainable energy future. Through our collaborative efforts, we are not just addressing the technical challenges of fusion energy; we are laying the groundwork for a world where energy is no longer a source of conflict but a catalyst for peace and prosperity.

India's pivotal role in this endeavor marks a significant leap not just for the country but for the global community, highlighting the importance of diversity, innovation, and partnership in overcoming the challenges of our time. Together, with optimism and determination, we are charting a course towards a unified future, illuminated by the promise of fusion energy and the enduring spirit of global collaboration. Join us as we forge a new path forward, inspired by the vision of a world powered by clean, abundant, and accessible energy for everyone.

Media Contact
Company Name: Sakura Marketing
Contact Person: Andrea Romero
Email: Send Email
City: Los Angeles
State: California
Country: United States
Website: https://www.kronosfusionenergy.com/



Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
 
 
Copyright © 2010-2020 MillValley.com & California Media Partners, LLC. All rights reserved.