Sign In  |  Register  |  About Mill Valley  |  Contact Us

Mill Valley, CA
September 01, 2020 1:29pm
7-Day Forecast | Traffic
  • Search Hotels in Mill Valley

  • CHECK-IN:
  • CHECK-OUT:
  • ROOMS:

Sterling Metals Announces Initial Assay Results from the Adeline Project, Labrador

TORONTO, ON / ACCESSWIRE / December 8, 2023 / Sterling Metals Corp. (TSXV:SAG)(OTCQB:SAGGF) ("Sterling Metals" or the "Company") is pleased to report assay results from its inaugural drilling on the Adeline project ("Adeline" or the "Project") in Labrador Canada. A total of 1,930 meters of drilling was completed in 11 drill holes focused on testing the Ellis Main prospect ("Ellis") and the Whiskey target. In addition to the drilling campaign, the Company completed a surface sampling program from outcrops in the Whiskey area.

Highlights

  • Inaugural drilling across the 44km x 7km basin tested two initial targets on opposite ends of the basin, with 10 of 11 holes intersecting copper mineralization, underscoring the robustness of the system (Figure 1)
  • At Ellis, 8 holes tested the historic mineralized grey bed at depth and along strike with the following results as shown in Figure 2:
    • ELS-23-007 intersected an extensive copper zone over a 150m by 100m area, with 25m @ 0.24% Cu and 4.05 g/t Ag, including 2.6m @ 0.87% Cu and 11.54 g/t Ag
    • While the grey bed unexpectedly thinned, drilling intersection a mafic sill, a rock type differing from initial expectations, though typical in systems of this nature
    • Notably, visuals confirmed 6 copper minerals across this 25m wide zone with extensive copper oxides suggesting potential at depth of sulphide accumulations
  • At Whiskey located 25km east of Ellis, 3 holes showed pinching of the grey bed with narrower mineralization including:
    • WHS-23-010 intersected 3.1m @ 0.96% Cu and 11.78 g/t Ag, including 0.7m @ 3.54% Cu and 46 g/t Ag
    • WHS-23-011 which intersected 2.1m @ 1.20% Cu and 16.43 g/t Ag and 0.6m @ 3.22% Cu and 46 g/t Ag
  • Additionally, encouraging sampling of outcrops south of drilling in the Whiskey area showed additional emerging copper trends on the eastern portion of the basin with 17 samples grading higher than 0.5% Cu and up to 2.44% Cu
  • Camp was winterized prior to demobilization and a drill remains on site for a potential winter program

Mathew Wilson, CEO, stated, "The discovery of a big metal district requires a big metal system, which is exactly what we have at Adeline. The macro environment for copper remains very promising and even more so here at home in Canada. Our aim is to establish a copper project capable of putting Canada back on the copper map and this is just the first step. We are currently evaluating the data to identify a clear path to targeting both at Ellis and across the entirety of the 44km x 7km system. With over $4 million in the treasury, we are confident our systematic approach to targeting will result in an efficient and successful program when we return to drill at Adeline."

Jeremy Niemi, SVP Exploration and Evaluation, commented, "The extent of the mineralization encountered in this inaugural program serves as a clear indication that there is much more to Ellis than we have seen so far - let alone across the entirety of this project. We went into this program to test a single previously developed target looking to establish the continuity of mineralized grey beds and a potential large hydrothermal breccia zone which we hoped would correlate with the IP survey conducted in the 90's. While the grey beds did not continue at Ellis and the IP did not correlate to a large breccia zone, hole 7 did establish itself as having potential to represent the top of a flow breccia. The native copper in quartz veins and rock type are similar to the zones in the Keewenawan peninsula which provided a large source of copper for the U.S. in the 1900s. The grades and style of mineralization suggest we are potentially in proximity stronger copper zone. We are focused on refining our targeting approach to zero in on large accumulations of copper sulphide mineralization both at depth and to the south at Ellis, and across the property, to increase the probability of future drilling success and targeting."

2023 Adeline Drilling Program

The Company's 2023 Adeline drill program (Figures 1 and 2) (See Tables 1 and 2 for full results and drill hole locations) was designed to test both the extents of the mineralized grey beds at Ellis at depth and along strike as well as a potential blowout of the copper mineralization interpreted from the model of historical IP carried out on the project. In the first 3 holes it became clear that the grey bed mineralization observed on surface and in historical drill core, had disappeared and appeared to be replaced by a mafic sill. The top surface of the mafic sill was mineralized with copper oxide and native copper.

Copper mineralization was intersected in the tops of mafic flows in veined and brecciated rocks. This prompted the Company to adjust the angle of the last two holes at the target and approach the mineralization from a new perspective. Hole ELS-23-007 intersected a relatively wide zone of copper oxide mineralization which extended beyond fractures as observed in the initial holes. This was thought to potentially be the top of a flow breccia. Hole ELS-23-008 was an attempt to follow this mineralization to the south along the structure and towards historic conductors but deviated to the north and hit the edge of the oxide/sulfide zone, intercepting native copper in quartz veins.

Additionally, the copper zone identified in drilling was not consistent with the IP anomaly identified by Noranda from the 90's. The Company is currently carrying out physical properties on the core, especially the rocks above the copper zone, to identify potential alternative sources of the chargeability response shown in the IP survey. There is extensive hematite mineralization and this may be responsible for the large target area shown in the chargeability response.

Figure 1. Plan map showing of the Adeline Project

Figure 2. Plan map showing 2023 Adeline Project drilling at Ellis target

Figure 3. Copper mineralization in hole ELS-23-007 showing extensive chrysocolla with malachite

The final three holes of the program were drilled at the Whiskey target, approximately 25km east of the Ellis target. The drilling was designed to undercut copper mineralization within grey beds at a historical trench. Drilling showed that the grey bed appeared to pinch resulting in narrower intersections than observed in the trench. Holes WHS-23-010 and WHS-23-011 intersected 3.54% and 3.22% copper of approximately 0.6m which were haloed by lower grade mineralization of 1-2m wide.

Table 1. Reported assay intervals from 2023 Adeline drilling

Target Hole Number From (m) To
(m)
Length (m) Cu(%) Ag (g/t)
Ellis ELS-23-001 138.0 150.0 12.0 0.49 12.30
including 138.0 139.8 1.8 2.02 67.00
ELS-23-002 157.7 159.9 2.3 0.22 1.23
and 197.7 200.6 2.9 0.13 1.00
ELS-23-003 25.6 27.0 1.5 0.80 26.55
and 164.8 166.5 1.8 0.67 9.62
ELS-23-003 176.5 179.2 2.8 0.11 1.90
ELS-23-004 no significant mineralization
ELS-23-005 149.0 159.1 10.1 0.34 3.90
including 155.0 159.1 4.1 0.60 7.05
and 191.5 192.6 1.1 0.18 1.29
ELS-23-006 177.7 180.0 2.3 0.09 1.94
and 185.2 190.3 5.2 0.33 1.58
and 203.0 205.0 2.0 0.14 1.00
ELS-23-007 165.0 190.0 25.0 0.24 4.05
including 180.9 183.5 2.6 0.87 11.54
ELS-23-008 181.7 184.0 2.3 0.15 4.89
and 186.5 187.0 0.5
ELS-23-008 205.7 207.6 1.8 0.14 0.63
Whiskey WHS-23-009 10.2 14.0 3.8 0.35 6.64
WHS-23-010 7.0 10.1 3.1 0.96 11.78
including 7.7 8.3 0.7 3.54 46.00
WHS-23-011 6.5 8.6 2.1 1.20 16.43
including 7.4 8.0 0.6 3.22 46.00
  1. See Figure 2 and Table 2 for drill hole locations.
  2. All reported depths and intervals are drill hole depths and intervals unless otherwise noted, and do not represent true thicknesses, which have yet to be determined.

Table 2. Reported 2023 Adeline hole locations and directions

Hole number Depth (m) Azimuth Dip Easting Northing Elevation
ELS-23-001 197 330 -55 567387 6018554 380
ELS-23-002 222 330 -70 567387 6018554 380
ELS-23-003 254.33 330 -80 567387 6018554 380
ELS-23-004 227 330 -61 567452 6018531 390
ELS-23-005 202 330 -70 567344 6018531 379
ELS-23-006 218 330 -82 567344 6018531 379
ELS-23-007 209 45 -75 567299 6018540 355
ELS-23-008 221 45 -86 567299 6018540 355
WHS-23-009 59 330 50 591901 6015582 375
WHS-23-010 49 330 -65 591901 6015582 375
WHS-23-011 73 323 -80 591901 6015582 375

Whiskey Area Sampling Program

In addition to the drilling program, the Company collected a total of 34 outcrop surface samples at the Whiskey target area (See Table 3 for full results). 17 of the samples graded higher than 0.5% copper and the range of values was between 0.002% Cu and 2.44% (See Figure 6). The samples were taken mostly to the south of the Whiskey drilling along additional emerging copper trends. In many cases the sample locations were taken along the historical IP grid and coincident with chargeability anomalies that came to surface.

Figure 4. Surface sample locations and results at Whiskey target

Table 3. Reported 2023 Adeline Sample Results

Sample ID

Easting (m)

Northing (m)

Elevation (m)

Cu (%)

Ag (g/t)
WHFS-23-002 591950 6015509 389 0.51 2.0
WHFS-23-003 591935 6015585 384 0.64 16.0
WHFS-23-004A 591902 6015413 387 1.63 200.0
WHFS-23-004B 591902 6015413 387 2.44 128.0
WHFS-23-004C 591902 6015413 387 0.64 38.0
WHFS-23-004D 591902 6015413 387 1.04 36.0
WHFS-23-004E 591902 6015413 387 1.09 183.0
WHFS-23-004F 591902 6015413 387 0.41 14.0
WHFS-23-004G 591902 6015413 387 1.99 75.0
WHFS-23-005 592020 6015434 372 0.01 2.0
WHFS-23-006 592018 6015427 373 0.02 0.5
WHFS-23-007 591884 6015412 380 0.20 14.0
WHFS-23-008 591865 6015394 377 0.00 0.5
WHFS-23-009 591835 6015400 380 0.01 0.5
WHFS-23-010 591882 6015352 379 0.01 1.0
WHFS-23-012A 591898 6015411 385 0.27 13.0
WHFS-23-012B 591898 6015411 385 0.85 29.0
WHFS-23-013A 591896 6015414 383 0.25 18.0
WHFS-23-013B 591896 6015414 383 0.32 18.0
WHFS-23-014 591957 6015431 395 0.49 9.0
WHFS-23-015 591959 6015432 396 2.29 57.0
WHFS-23-016 591961 6015438 397 0.93 11.0
WHFS-23-017 591765 6015423 382 0.01 0.5
WHFS-23-018 591926 6015433 380 1.24 20.0
WHFS-23-019 592033 6015525 382 0.01 0.5
WHFS-23-020 592247 6015457 359 1.03 22.0
WHFS-23-021 592250 6015445 357 0.70 5.0
WHFS-23-022 592282 6015441 352 1.24 28.0
WHFS-23-023 592294 6015433 348 2.05 51.0
WHFS-23-024 591947 6015441 372 0.30 11.0
WHFS-23-025 591874 6015331 383 0.01 0.5
WHFS-23-027A 591842 6015151 381 0.77 1.0
WHFS-23-027B 591842 6015151 381 0.00 0.5
WHFS-23-027C 591831 6015149 382 0.09 1.0

Next Steps

The Company is undertaking a number of exploration activities to extract further value from both recent drilling and historical data. Additional analytical work is underway to examine the role of hydrocarbons within the sedimentary rocks in triggering the accumulation of copper mineralization. Analysis of non-carbonate sources of carbon is the initial step and will be followed by a hyperspectral analysis of historical holes for the presence of hydrocarbons across the property. Hydrocarbons in the sediments would be part of a favourable copper mineralization setting and open the opportunity to scan the entire property for new target areas with satellite data. The Company anticipates undertaking an advanced hyperspectral study using shortwave infrared channels to map favourable rocks and to bring new target areas across the property forward.

Currently, the field team is carrying out a physical property study on Sterling Metals 2023 core and historical core available in the Newfoundland and Labrador core library in Goose Bay. Measurements of magnetic susceptibility, gravity, resistivity, chargeability, and conductivity are being made on mineralized and non-mineralized drill core to aid in geophysical modeling and in designing future work programs.

Additionally, interpretation of the data from a DIGHEM airborne EM survey flown in 1992 for Noranda Exploration is underway. The survey identified numerous weak and moderate conductors and Sterling is modelling the conductors, which is expected to allow the team to characterize and rank each conductor. The team will prioritize conductors along favourable regional structures, within ideal host rocks and where copper occurrences have been identified nearby. This study will lead to sites which should be visited in the next exploration campaign for groundwork in 2024.

About the Adeline Project, Labrador

Comprised of roughly 30,000 hectares and a 44 km strike of copper-silver-rich terrain, Adeline covers the youngest middle Mesoproterozoic volcano-sedimentary sequences, known as the Seal Lake Group. The Seal Lake Group consists of supracrustal argillaceous and arenaceous sedimentary rocks, intercalated with basalt flows and intruded by gabbro sills. The volcano-sedimentary rocks formed as a result of extensive continental sedimentation from the transition from subaerial to shallow-marine during a rift-related cycle of uplift and erosions.

While sediment-hosted stratiform copper deposits are widespread, economically significant occurrences are infrequent. These deposits contribute to roughly 20 percent of global copper production and known reserves. Supergiant and giant deposits are formed in basins that experienced extended periods of fluid flow, where specific conditions facilitated the accumulation of substantial quantities of metal-rich fluid, ample reduced sulfur, and significant amounts of reductants.

Quality Assurance/Quality Control - Sampling Procedures

All drill holes are diamond drill core with NQ diameter. Drill core is delivered by helicopter to the Sterling Metals Seal Lake secure camp and core logging site. All core is photographed, logged, and sampled by the Sterling Metals exploration team. After detailed logging and photographs are taken, the boxes to be sampled are secured to the core box lid, and flown by float plane to Goose Bay, where they are received by Sterling Metals personnel and brought to the secure core facility. Drill core was halved by sawing with a diamond saw blade and half-core samples were placed in pre-labelled clear sample bags with a unique sample ID tag, sealed with a zip tie, and then placed into rice bags sealed with security tags and securely stored until shipped by commercial transport to the ALS Geochemistry core preparation facility in Montreal, Quebec. ALS Geochemistry is an accredited laboratory certified under ISO 17025 Standard.

For samples not containing native copper:

Preparation for these samples involves crushing them until 70% successfully pass through a 2mm sieve, followed by the generation of a 250-gram sub-sample split using a riffle splitter. The remaining material is further processed to achieve an 85% passing rate through a 75µm sieve. Subsequently, the samples undergo analysis using Inductively Coupled Plasma - Atomic Emission Spectroscopy (ICP-AES), which provides a comprehensive understanding of sample composition with a suite of 48 elements included in the ICP package. Sample digestion is carried out using a specialized 4-acid mixture, with a 0.4g aliquot. This method allows for the measurement of copper concentrations of up to 100,000 ppm and silver concentrations of up to 200 ppm, which would prompt overlimit analysis.

For samples containing native copper:

Preparation for these samples involves crushing them until 70% successfully pass through a 2mm sieve, followed by the generation of a 1,000-gram sub-sample split using a riffle splitter. Subsequently, the entire 1,000-gram sub-sample undergoes screen metallic copper analysis. The minus fraction is then sent for ICP analysis to determine the full suite of 48-element concentrations.

A crushed marble blank, a certified OREAS copper standard, and a core duplicate are systematically inserted into the sample analysis process. Furthermore, an extra blank sample is included immediately after any native copper samples. Analysis of the QAQC results is performed upon receipt from the laboratory, along with analysis of ALS's internal QAQC results, including pulp and reject duplicates.

Qualified Person

Jeremy Niemi, P.Geo., Senior Vice President, Exploration and Evaluation for Sterling Metals has reviewed and approved the technical information presented herein.

About Sterling Metals

Sterling Metals (TSXV:SAG) and (OTCQB:SAGGF) is a mineral exploration company focused on large scale and high-grade Canadian exploration opportunities. The Company is advancing the Adeline Project in Labrador which covers an entire sediment-hosted copper belt, with demonstrated potential for important new copper discoveries with significant silver credits, and the Sail Pond Project in Newfoundland.

For more information, please contact:

Sterling Metals Corp.
Mathew Wilson, CEO and Director
Tel: (416) 643-3887
Email: info@sterlingmetals.ca
Website: www.sterlingmetals.ca

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains certain "forward-looking information" within the meaning of applicable securities laws. Forward looking information is frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate", "may", "will", "would", "potential", "proposed" and other similar words, or statements that certain events or conditions "may" or "will" occur. These statements are only predictions. Forward-looking information is based on the opinions and estimates of management at the date the information is provided and is subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking information. For a description of the risks and uncertainties facing the Company and its business and affairs, readers should refer to the Company's Management's Discussion and Analysis. The Company undertakes no obligation to update forward-looking information if circumstances or management's estimates or opinions should change, unless required by law. The reader is cautioned not to place undue reliance on forward-looking information.

SOURCE: Sterling Metals Corp.



View the original press release on accesswire.com

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.
 
 
Copyright © 2010-2020 MillValley.com & California Media Partners, LLC. All rights reserved.